[U-Boot] [PATCH 05/10] imx6: move MXC_GPIO define to mx6_common.h
Peter Robinson
pbrobinson at gmail.com
Mon May 11 18:22:07 CEST 2015
Define CONFIG_MXC_GPIO and CONFIG_CMD_GPIO by default in mx6_common
Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
---
include/configs/aristainetos.h | 2 --
include/configs/cgtqmx6eval.h | 1 -
include/configs/cm_fx6.h | 7 -------
include/configs/embestmx6boards.h | 1 -
include/configs/gw_ventana.h | 3 ---
include/configs/hummingboard.h | 1 -
include/configs/mx6_common.h | 4 ++++
include/configs/mx6cuboxi.h | 1 -
include/configs/mx6qarm2.h | 1 -
include/configs/mx6sabre_common.h | 1 -
include/configs/mx6slevk.h | 1 -
include/configs/mx6sxsabresd.h | 1 -
include/configs/nitrogen6x.h | 2 --
include/configs/novena.h | 1 -
include/configs/ot1200.h | 1 -
include/configs/platinum.h | 4 ----
include/configs/secomx6quq7.h | 1 -
include/configs/tbs2910.h | 2 --
include/configs/titanium.h | 1 -
include/configs/tqma6.h | 1 -
include/configs/udoo.h | 1 -
include/configs/wandboard.h | 1 -
include/configs/warp.h | 1 -
23 files changed, 4 insertions(+), 36 deletions(-)
diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h
index bedbab4..a883a37 100644
--- a/include/configs/aristainetos.h
+++ b/include/configs/aristainetos.h
@@ -24,7 +24,6 @@
#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART5_BASE
@@ -251,7 +250,6 @@
#define CONFIG_SYS_I2C_SLAVE 0x7f
#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
-#define CONFIG_CMD_GPIO
#define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15)
/* NAND stuff */
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index ba30cfc..ced4d6c 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -22,7 +22,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 8b89278..5ef7ba7 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -17,10 +17,6 @@
#define CONFIG_SYS_LITTLE_ENDIAN
#define CONFIG_MACH_TYPE 4273
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_GPIO
-#endif
-
/* CMD */
#define CONFIG_CMD_GREPENV
#undef CONFIG_CMD_LOADB
@@ -250,9 +246,6 @@
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
-/* GPIO */
-#define CONFIG_MXC_GPIO
-
/* Boot */
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_LOADADDR 0x10800000
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index a58ad92..574033e 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -26,7 +26,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index b713925..3bee61a 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -32,9 +32,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
-/* GPIO */
-#define CONFIG_MXC_GPIO
-
/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
diff --git a/include/configs/hummingboard.h b/include/configs/hummingboard.h
index 3a62ab4..468a40f 100644
--- a/include/configs/hummingboard.h
+++ b/include/configs/hummingboard.h
@@ -19,7 +19,6 @@
#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index f978232..bc225ea 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -49,4 +49,8 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+/* GPIO */
+#define CONFIG_MXC_GPIO
+#define CONFIG_CMD_GPIO
+
#endif
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index a4e4d96..435cb4b 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -19,7 +19,6 @@
#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 7a124e0..77b0d87 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -15,7 +15,6 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART4_BASE
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index ad288f4..b08f006 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -18,7 +18,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 2fbb0df..8b450c5 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -18,7 +18,6 @@
#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index e1abbcf..72b87a2 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -22,7 +22,6 @@
#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index ecfc393..7922bbd 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -19,8 +19,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
-#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_GPIO
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
diff --git a/include/configs/novena.h b/include/configs/novena.h
index 841edac..5bdc22d 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -17,7 +17,6 @@
#define CONFIG_FAT_WRITE
#define CONFIG_FIT
#define CONFIG_KEYBOARD
-#define CONFIG_MXC_GPIO
#define CONFIG_OF_LIBFDT
#include "mx6_common.h"
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index afd9385..4476e01 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -15,7 +15,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
-#define CONFIG_MXC_GPIO
/* FUSE Configs */
#define CONFIG_CMD_FUSE
diff --git a/include/configs/platinum.h b/include/configs/platinum.h
index 75d459f..b192c3f 100644
--- a/include/configs/platinum.h
+++ b/include/configs/platinum.h
@@ -26,7 +26,6 @@
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FUSE
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
@@ -44,9 +43,6 @@
* Hardware configuration
*/
-/* GPIO config */
-#define CONFIG_MXC_GPIO
-
/* UART config */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/secomx6quq7.h b/include/configs/secomx6quq7.h
index 60d8416..adc6d7f 100644
--- a/include/configs/secomx6quq7.h
+++ b/include/configs/secomx6quq7.h
@@ -17,7 +17,6 @@
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index ec1c7a4..d53ac01 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -17,8 +17,6 @@
#define CONFIG_MACH_TYPE 3980
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_GPIO
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
index f09ad8b..0aa2ba2 100644
--- a/include/configs/titanium.h
+++ b/include/configs/titanium.h
@@ -25,7 +25,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 24fb3ce..645c16c 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -33,7 +33,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
/* SPI */
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index c51e05a..9fa18f5 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -18,7 +18,6 @@
#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index e5ae0cc..d6dc6de 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -19,7 +19,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/warp.h b/include/configs/warp.h
index 83afc7f..1c8b71f 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -20,7 +20,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
--
2.4.0
More information about the U-Boot
mailing list