[U-Boot] [PATCH 4/6] hi6553: Add register definition and bitfield header for 6553 pmic

[Peter Griffin]

This pmic is used on the 96boards consumer edition HiKey board.

Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
---
 arch/arm/include/asm/arch-armv8/hi6553.h | 75 ++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-armv8/hi6553.h

diff --git a/arch/arm/include/asm/arch-armv8/hi6553.h b/arch/arm/include/asm/arch-armv8/hi6553.h
new file mode 100644
index 0000000..d0770e1
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/hi6553.h
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2015 Linaro
+ * Peter Griffin <peter.griffin at linaro.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __HI6553_PMIC_H__
+#define __HI6553_PMIC_H__
+
+#define HI6553_DISABLE6_XO_CLK			0x036
+
+#define HI6553_DISABLE6_XO_CLK_BB		(1 << 0)
+#define HI6553_DISABLE6_XO_CLK_CONN		(1 << 1)
+#define HI6553_DISABLE6_XO_CLK_NFC		(1 << 2)
+#define HI6553_DISABLE6_XO_CLK_RF1		(1 << 3)
+#define HI6553_DISABLE6_XO_CLK_RF2		(1 << 4)
+
+#define HI6553_VERSION_REG			0x000
+#define HI6553_ENABLE2_LDO1_8			0x029
+#define HI6553_DISABLE2_LDO1_8			0x02a
+#define HI6553_ONOFF_STATUS2_LDO1_8		0x02b
+#define HI6553_ENABLE3_LDO9_16			0x02c
+#define HI6553_DISABLE3_LDO9_16			0x02d
+#define HI6553_ONOFF_STATUS3_LDO9_16		0x02e
+#define HI6553_PERI_EN_MARK			0x040
+#define HI6553_BUCK2_REG1			0x04a
+#define HI6553_BUCK2_REG5			0x04e
+#define HI6553_BUCK2_REG6			0x04f
+#define HI6553_BUCK3_REG3			0x054
+#define HI6553_BUCK3_REG5			0x056
+#define HI6553_BUCK3_REG6			0x057
+#define HI6553_BUCK4_REG2			0x05b
+#define HI6553_BUCK4_REG5			0x05e
+#define HI6553_BUCK4_REG6			0x05f
+#define HI6553_CLK_TOP0				0x063
+#define HI6553_CLK_TOP3				0x066
+#define HI6553_CLK_TOP4				0x067
+#define HI6553_VSET_BUCK2_ADJ			0x06d
+#define HI6553_VSET_BUCK3_ADJ			0x06e
+#define HI6553_LDO7_REG_ADJ			0x078
+#define HI6553_LDO10_REG_ADJ			0x07b
+#define HI6553_LDO19_REG_ADJ			0x084
+#define HI6553_LDO20_REG_ADJ			0x085
+#define HI6553_DR_LED_CTRL			0x098
+#define HI6553_DR_OUT_CTRL			0x099
+#define HI6553_DR3_ISET				0x09a
+#define HI6553_DR3_START_DEL			0x09b
+#define HI6553_DR4_ISET				0x09c
+#define HI6553_DR4_START_DEL			0x09d
+#define HI6553_DR345_TIM_CONF0			0x0a0
+#define HI6553_NP_REG_ADJ1			0x0be
+#define HI6553_NP_REG_CHG			0x0c0
+#define HI6553_BUCK01_CTRL2			0x0d9
+#define HI6553_BUCK0_CTRL1			0x0dd
+#define HI6553_BUCK0_CTRL5			0x0e1
+#define HI6553_BUCK0_CTRL7			0x0e3
+#define HI6553_BUCK1_CTRL1			0x0e8
+#define HI6553_BUCK1_CTRL5			0x0ec
+#define HI6553_BUCK1_CTRL7			0x0ef
+#define HI6553_CLK19M2_600_586_EN		0x0fe
+
+#define HI6553_LED_START_DELAY_TIME		0x00
+#define HI6553_LED_ELEC_VALUE			0x07
+#define HI6553_LED_LIGHT_TIME			0xf0
+#define HI6553_LED_GREEN_ENABLE			(1 << 1)
+#define HI6553_LED_OUT_CTRL			0x00
+
+#define HI6553_PMU_V300				0x30
+#define HI6553_PMU_V310				0x31
+
+unsigned char hi6553_read_8(unsigned int offset);
+void hi6553_write_8(unsigned int offset, unsigned char value);
+
+#endif	/* __HI6553_PMIC_H__ */
-- 
1.9.1