[U-Boot] [PATCH] ppc: xilinx: Remove ancient ppc405 and ppc440 platform

[Tom Rini]

On Tue, May 12, 2015 at 04:19:52PM +0200, Ricardo Ribalda Delgado wrote:
> Hello
> 
> I have followed doc/README.generic-board  and simply adding
> CONFIG_SYS_GENERIC_BOARD does the trick.
> 
> So far it has build with no warnings for:
> 
> ml507
> ml507_flash
> xilinx-ppc440-generic
> v5fx30teval
> 
> and I have run it on the ml507 with no issues (is the only hw I have
> with me this week, but it is VERY similar to the others):
> 
> 
> Simply adding  CONFIG_SYS_GENERIC_BOARD to the .h file works perfectly
> As you can see from here:
> 
> 
> U-Boot 2015.07-rc1-00091-g698a12bef9e7-dirty (May 12 2015 - 10:14:15)
> 
> CPU:   IBM PowerPC 440x5 VIRTEX5 at 400 MHz (PLB=100 OPB=8 EBC=67)
>        32 KiB I-Cache 32 KiB D-Cache
> DRAM:  256 MiB
> Flash: 32 MiB
> *** Warning - bad CRC, using default environment
> 
> U-Boot is up and runnining
> ml507:/#
> 
> 
> Regarding xilinx-ppc404 and fx12mm
> 
> It also builds ok, but I have no access to an fx12mm. Perhaps Georg
> can give it a try to confirm that this still works.
> 
> 
> Is there any other test that needs to be done after "porting" them to
> generic board?

So I was about to send another email but then I dug a bit further and
see you're already listed as the maintainer for all of these platforms.
So the question comes back to you, is there anything else you'd want to
test before declaring things OK?  This particular change is indeed easy
but there's other stuff that'll need doing soon enough (device model
releated things), so please read up on that.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150512/494a7860/attachment.sig>