[U-Boot] [PATCH v2] arm, imx6, i2c: add I2C4 for MX6DL
Heiko Schocher
hs at denx.de
Wed May 13 07:50:47 CEST 2015
add I2C4 modul for MX6DL based boards.
Signed-off-by: Heiko Schocher <hs at denx.de>
---
checkpatch shows:
WARNING: line over 80 characters
+#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK (3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET)
but the hole file is full of lines longer than80 characters, so
I let this line in the old style ...
Changes in v2:
- add comment from Stefano Babic
- reworked patch on base of commit f8cb101e1e3f5
- follow up patch cleans up different define naming
arch/arm/cpu/armv7/mx6/clock.c | 33 +++++++++++++++++++++-----------
arch/arm/imx-common/i2c-mxv7.c | 5 ++++-
arch/arm/include/asm/arch-mx6/crm_regs.h | 2 ++
arch/arm/include/asm/arch-mx6/imx-regs.h | 1 +
drivers/i2c/mxc_i2c.c | 5 ++++-
5 files changed, 33 insertions(+), 13 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 055f44e..ae99945 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -140,23 +140,34 @@ int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
#endif
#ifdef CONFIG_SYS_I2C_MXC
-/* i2c_num can be from 0 - 2 */
+/* i2c_num can be from 0 - 3 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
u32 reg;
u32 mask;
- if (i2c_num > 2)
+ if (i2c_num > 3)
return -EINVAL;
-
- mask = MXC_CCM_CCGR_CG_MASK
- << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + (i2c_num << 1));
- reg = __raw_readl(&imx_ccm->CCGR2);
- if (enable)
- reg |= mask;
- else
- reg &= ~mask;
- __raw_writel(reg, &imx_ccm->CCGR2);
+ if (i2c_num < 3) {
+ mask = MXC_CCM_CCGR_CG_MASK
+ << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET
+ + (i2c_num << 1));
+ reg = __raw_readl(&imx_ccm->CCGR2);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ __raw_writel(reg, &imx_ccm->CCGR2);
+ } else {
+ mask = MXC_CCM_CCGR_CG_MASK
+ << (MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET);
+ reg = __raw_readl(&imx_ccm->CCGR1);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ __raw_writel(reg, &imx_ccm->CCGR1);
+ }
return 0;
}
#endif
diff --git a/arch/arm/imx-common/i2c-mxv7.c b/arch/arm/imx-common/i2c-mxv7.c
index 1a632e7..33205fb 100644
--- a/arch/arm/imx-common/i2c-mxv7.c
+++ b/arch/arm/imx-common/i2c-mxv7.c
@@ -67,9 +67,12 @@ static void * const i2c_bases[] = {
#ifdef I2C3_BASE_ADDR
(void *)I2C3_BASE_ADDR,
#endif
+#ifdef I2C4_BASE_ADDR
+ (void *)I2C4_BASE_ADDR,
+#endif
};
-/* i2c_index can be from 0 - 2 */
+/* i2c_index can be from 0 - 3 */
int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
struct i2c_pads_info *p)
{
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 0592ce0..887d048 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -592,6 +592,8 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCGR2_I2C2_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET)
#define MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET 10
#define MXC_CCM_CCGR2_I2C3_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET)
+#define MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET 8
+#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK (3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET)
#define MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET 12
#define MXC_CCM_CCGR2_OCOTP_CTRL_MASK (3 << MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET)
#define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET 14
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 9a4ad8b..3d3d137 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -277,6 +277,7 @@
#define UART3_BASE (AIPS2_OFF_BASE_ADDR + 0x6C000)
#define UART4_BASE (AIPS2_OFF_BASE_ADDR + 0x70000)
#define UART5_BASE (AIPS2_OFF_BASE_ADDR + 0x74000)
+#define I2C4_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000)
#define IP2APB_USBPHY1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000)
#define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 42782cb..c258a2b 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -421,7 +421,10 @@ static void * const i2c_bases[] = {
defined(CONFIG_MX6) || defined(CONFIG_LS102XA)
(void *)I2C1_BASE_ADDR,
(void *)I2C2_BASE_ADDR,
- (void *)I2C3_BASE_ADDR
+ (void *)I2C3_BASE_ADDR,
+#if defined(CONFIG_MX6DL)
+ (void *)I2C4_BASE_ADDR
+#endif
#elif defined(CONFIG_VF610)
(void *)I2C0_BASE_ADDR
#elif defined(CONFIG_FSL_LSCH3)
--
2.1.0
More information about the U-Boot
mailing list