[U-Boot] [PATCH 2/2] sunxi: Make dram odt-en configurable through Kconfig for A33 based boards

Hans de Goede hdegoede at redhat.com
Wed May 13 17:09:34 CEST 2015


Some A33 based boards use odt, while others do not, so make this configurable.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c | 3 +--
 board/sunxi/Kconfig                       | 8 ++++++++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c
index 979bb3c..a7a0a2e 100644
--- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c
+++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c
@@ -19,7 +19,6 @@
 #define DRAM_CLK_MUL 2
 #define DRAM_CLK_DIV 4
 #define DRAM_SIGMA_DELTA_ENABLE 1
-#define DRAM_ODT_EN 0
 
 struct dram_para {
 	u8 cs1;
@@ -215,7 +214,7 @@ static int mctl_channel_init(struct dram_para *para)
 	clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0);
 
 	/* Set ODT */
-	if ((CONFIG_DRAM_CLK > 400) && DRAM_ODT_EN) {
+	if ((CONFIG_DRAM_CLK > 400) && CONFIG_DRAM_ODT_EN) {
 		setbits_le32(DXnGCR0(0), 0x3 << 9);
 		setbits_le32(DXnGCR0(1), 0x3 << 9);
 	} else {
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 940b6c7..d4ae6c7 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -95,6 +95,14 @@ config DRAM_ZQ
 	---help---
 	Set the dram zq value.
 
+if MACH_SUN8I_A33
+config DRAM_ODT_EN
+	int "sunxi dram odt enable"
+	default 0
+	---help---
+	Set this to 1 to enable dram odt (on die termination)
+endif
+
 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 config DRAM_EMR1
 	int "sunxi dram emr1 value"
-- 
2.4.0



More information about the U-Boot mailing list