[U-Boot] [PATCH v2 3/4] imx: mx6: add display of CPU temperature grade in print_cpuinfo()

[Fabio Estevam]

Hi Tim,

On Fri, May 15, 2015 at 10:31 AM, Tim Harvey <tharvey at gateworks.com> wrote:

> Yes, that sounds like the best approach. What were your thoughts on
> enabling the second CPU: line just to display the temperature grade if
> CONFIG_IMX6_THERMAL was not enabled?
>
> I'm surprised someone on this list hasn't already tested this on IMX6SX.
>
> Fabio - certainly you must have a reference board with an IMX6SX and
> could enable/test that the CPU markings agree with what is
> detected/displayed via OTP?

Yes, I do have a mx6sx sdb board, but the one I have is from the old
silicon and I had issues event with the temperature reading, so I
prefer not to rely on my testing.

Ye Li / Peng / Nitin,

Could some of you please test Tim's series on a mx6sx sdb and let us
know what it displays on the CPU lines?

Thanks,

Fabio Estevam