[U-Boot] [PATCH v2] i2c, mxc: rework i2c base address names for different SoCs
Heiko Schocher
hs at denx.de
Mon May 18 10:58:12 CEST 2015
rework and unify i2c address names for different SoCs, which
use the mxc_i2c driver.
Signed-off-by: Heiko Schocher <hs at denx.de>
---
Changes in v2:
- add comment from Stefano Babic
- rebase against 3bfe3ce2a6e3b04da1
arch/arm/include/asm/arch-imx/imx-regs.h | 2 +-
arch/arm/include/asm/arch-mx25/imx-regs.h | 6 ++--
arch/arm/include/asm/arch-mx27/imx-regs.h | 4 +--
arch/arm/include/asm/arch-vf610/imx-regs.h | 2 +-
drivers/i2c/mxc_i2c.c | 49 +++++++++++++++---------------
5 files changed, 31 insertions(+), 32 deletions(-)
diff --git a/arch/arm/include/asm/arch-imx/imx-regs.h b/arch/arm/include/asm/arch-imx/imx-regs.h
index 4de0779..93e3369 100644
--- a/arch/arm/include/asm/arch-imx/imx-regs.h
+++ b/arch/arm/include/asm/arch-imx/imx-regs.h
@@ -42,7 +42,7 @@
#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
+#define I2C1_BASE_ADDR (0x17000 + IMX_IO_BASE)
#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index 3dffa4a..78c4e9b 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -293,13 +293,13 @@ struct cspi_regs {
#define IMX_ETB_SLOT4_BASE (0x43F0C000)
#define IMX_ETB_SLOT5_BASE (0x43F10000)
#define IMX_ECT_CTIO_BASE (0x43F18000)
-#define IMX_I2C_BASE (0x43F80000)
-#define IMX_I2C3_BASE (0x43F84000)
+#define I2C1_BASE_ADDR (0x43F80000)
+#define I2C3_BASE_ADDR (0x43F84000)
#define IMX_CAN1_BASE (0x43F88000)
#define IMX_CAN2_BASE (0x43F8C000)
#define UART1_BASE (0x43F90000)
#define UART2_BASE (0x43F94000)
-#define IMX_I2C2_BASE (0x43F98000)
+#define I2C2_BASE_ADDR (0x43F98000)
#define IMX_OWIRE_BASE (0x43F9C000)
#define IMX_CSPI1_BASE (0x43FA4000)
#define IMX_KPP_BASE (0x43FA8000)
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index 7402e31..baf1d29 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -184,13 +184,13 @@ struct fuse_bank0_regs {
#define UART2_BASE (0x0b000 + IMX_IO_BASE)
#define UART3_BASE (0x0c000 + IMX_IO_BASE)
#define UART4_BASE (0x0d000 + IMX_IO_BASE)
-#define IMX_I2C1_BASE (0x12000 + IMX_IO_BASE)
+#define I2C1_BASE_ADDR (0x12000 + IMX_IO_BASE)
#define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE)
#define IMX_TIM4_BASE (0x19000 + IMX_IO_BASE)
#define IMX_TIM5_BASE (0x1a000 + IMX_IO_BASE)
#define IMX_UART5_BASE (0x1b000 + IMX_IO_BASE)
#define IMX_UART6_BASE (0x1c000 + IMX_IO_BASE)
-#define IMX_I2C2_BASE (0x1D000 + IMX_IO_BASE)
+#define I2C2_BASE_ADDR (0x1D000 + IMX_IO_BASE)
#define IMX_TIM6_BASE (0x1f000 + IMX_IO_BASE)
#define IMX_AIPI2_BASE (0x20000 + IMX_IO_BASE)
#define IMX_PLL_BASE (0x27000 + IMX_IO_BASE)
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index a7d765a..2021981 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -74,7 +74,7 @@
#define ESAI_BASE_ADDR (AIPS0_BASE_ADDR + 0x00062000)
#define ESAI_FIFO_BASE_ADDR (AIPS0_BASE_ADDR + 0x00063000)
#define WDOG_BASE_ADDR (AIPS0_BASE_ADDR + 0x00065000)
-#define I2C0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00066000)
+#define I2C1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00066000)
#define WKUP_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006A000)
#define CCM_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006B000)
#define GPC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006C000)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 2949e52..b3c50aa 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -170,6 +170,9 @@ static int bus_i2c_set_bus_speed(struct mxc_i2c_bus *i2c_bus, int speed)
u8 idx = i2c_clk_div[clk_idx][1];
int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
+ if (!base)
+ return -ENODEV;
+
/* Store divider value */
writeb(idx, base + (IFDR << reg_shift));
@@ -351,6 +354,10 @@ static int i2c_init_transfer(struct mxc_i2c_bus *i2c_bus, u8 chip,
int ret;
int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
+
+ if (!i2c_bus->base)
+ return -ENODEV;
+
for (retry = 0; retry < 3; retry++) {
ret = i2c_init_transfer_(i2c_bus, chip, addr, alen);
if (ret >= 0)
@@ -503,38 +510,30 @@ static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
return ret;
}
-static struct mxc_i2c_bus mxc_i2c_buses[] = {
-#if defined(CONFIG_MX25)
- { 0, IMX_I2C_BASE },
- { 1, IMX_I2C2_BASE },
- { 2, IMX_I2C3_BASE },
-#elif defined(CONFIG_MX27)
- { 0, IMX_I2C1_BASE },
- { 1, IMX_I2C2_BASE },
-#elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \
- defined(CONFIG_MX51) || defined(CONFIG_MX53) || \
- defined(CONFIG_MX6)
- { 0, I2C1_BASE_ADDR },
- { 1, I2C2_BASE_ADDR },
- { 2, I2C3_BASE_ADDR },
-#if defined(CONFIG_MX6DL)
- { 3, I2C4_BASE_ADDR },
+#if !defined(I2C2_BASE_ADDR)
+#define I2C2_BASE_ADDR 0
#endif
-#elif defined(CONFIG_LS102XA)
- { 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG },
- { 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG },
- { 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG },
-#elif defined(CONFIG_VF610)
- { 0, I2C0_BASE_ADDR, I2C_QUIRK_FLAG },
-#elif defined(CONFIG_FSL_LSCH3)
+
+#if !defined(I2C3_BASE_ADDR)
+#define I2C3_BASE_ADDR 0
+#endif
+
+#if !defined(I2C4_BASE_ADDR)
+#define I2C4_BASE_ADDR 0
+#endif
+
+static struct mxc_i2c_bus mxc_i2c_buses[] = {
+#if defined(CONFIG_LS102XA) || defined(CONFIG_FSL_LSCH3)
{ 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG },
{ 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG },
{ 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG },
{ 3, I2C4_BASE_ADDR, I2C_QUIRK_FLAG },
#else
-#error "architecture not supported"
+ { 0, I2C1_BASE_ADDR, 0 },
+ { 1, I2C2_BASE_ADDR, 0 },
+ { 2, I2C3_BASE_ADDR, 0 },
+ { 3, I2C4_BASE_ADDR, 0 },
#endif
- { }
};
struct mxc_i2c_bus *i2c_get_base(struct i2c_adapter *adap)
--
2.1.0
More information about the U-Boot
mailing list