[U-Boot] [PATCH v3 2/2] imx: mx6: display max cpu frequency in print_cpuinfo()
Tim Harvey
tharvey at gateworks.com
Mon May 18 16:02:25 CEST 2015
Display the max CPU frequency as well as the current running CPU frequency
if the max CPU frequency is available and differs from the current CPU
frequency.
Before:
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
After - using an 800MHz IMX6DL (running at its max)
CPU: Freescale i.MX6DL rev1.1 at 792 MHz
After - using a 1GHz IMX6Q (not running at its max):
CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
Cc: Stefan Roese <sr at denx.de>
Cc: Eric Nelson <eric.nelson at boundarydevices.com>
Cc: Heiko Schocher <hs at denx.de>
Cc: Nikita Kiryanov <nikita at compulab.co.il>
Cc: Jon Nettleton <jon.nettleton at gmail.com>
Cc: Jason Liu <r64343 at freescale.com>
Cc: Ye Li <b37916 at freescale.com>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Christian Gmeiner <christian.gmeiner at gmail.com>
Cc: Markus Niebel <Markus.Niebel at tq-group.com>
Cc: Peng Fan <b51431 at freescale.com>
Tested-by: Nikolay Dimitrov <picmaster at mail.bg>
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
v3:
- fix commit message (mx: mx6 -> imx: mx6)
- added Nikolay's tested by
v2:
- split out from patch that obtains the max cpu freq
- add before/after example and more description of change
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
v2:
---
arch/arm/imx-common/cpu.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index 067d08f..6b20482 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -142,7 +142,7 @@ const char *get_imx_type(u32 imxtype)
int print_cpuinfo(void)
{
- u32 cpurev;
+ u32 cpurev, max_freq;
#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
struct udevice *thermal_dev;
@@ -151,11 +151,25 @@ int print_cpuinfo(void)
cpurev = get_cpu_rev();
+#if defined(CONFIG_MX6)
+ printf("CPU: Freescale i.MX%s rev%d.%d",
+ get_imx_type((cpurev & 0xFF000) >> 12),
+ (cpurev & 0x000F0) >> 4,
+ (cpurev & 0x0000F) >> 0);
+ max_freq = get_cpu_speed_grade_hz();
+ if (!max_freq || max_freq == mxc_get_clock(MXC_ARM_CLK)) {
+ printf(" at %dMHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
+ } else {
+ printf(" %d MHz (running at %d MHz)\n", max_freq / 1000000,
+ mxc_get_clock(MXC_ARM_CLK) / 1000000);
+ }
+#else
printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n",
get_imx_type((cpurev & 0xFF000) >> 12),
(cpurev & 0x000F0) >> 4,
(cpurev & 0x0000F) >> 0,
mxc_get_clock(MXC_ARM_CLK) / 1000000);
+#endif
#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev);
--
1.9.1
More information about the U-Boot
mailing list