[U-Boot] [Patch v3 0/4] imx: mx6: use OTP for teperature grade info

[Stefano Babic]

Hi Peng, Tim,

On 19/05/2015 02:21, Peng Fan wrote:

> 
> U-Boot 2015.07-rc1-00260-g44bf513 (May 19 2015 - 09:14:52)
> 
> CPU:   Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
> Reset cause: POR
> Board: MX6SX SABRE SDB
> I2C:   ready
> DRAM:  1 GiB
> PMIC:  PFUZE100 ID=0x11
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> In:    serial
> Out:   serial
> Err:   serial
> Net:   FEC [PRIME]
> Hit any key to stop autoboot:  0
> =>
> 
> Tested-by: Peng Fan <Peng.Fan at freescale.com>
> 

Thanks.

It looks like the last issue was solved - if nobody else complains,
these patches are ready for merging.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================