[U-Boot] [PATCH] usb: ohci: enable cache support

[Josh Wu]

Remove the CONFIG_DM_USB limitation to enable cache support functions.
Tested on SAMA5D3x-EK board.

Signed-off-by: Josh Wu <josh.wu at atmel.com>
---

 drivers/usb/host/ohci-hcd.c | 10 +---------
 drivers/usb/host/ohci.h     |  2 +-
 2 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 494b760..8920b0f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -103,21 +103,13 @@ static struct pci_device_id ehci_pci_ids[] = {
 # define m32_swap(x) cpu_to_le32(x)
 #endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
 
-#ifdef CONFIG_DM_USB
-/*
- * We really should do proper cache flushing everywhere, but for now we only
- * do it for new (driver-model) usb code to avoid regressions.
- */
+/* We really should do proper cache flushing everywhere */
 #define flush_dcache_buffer(addr, size) \
 	flush_dcache_range((unsigned long)(addr), \
 		ALIGN((unsigned long)(addr) + size, ARCH_DMA_MINALIGN))
 #define invalidate_dcache_buffer(addr, size) \
 	invalidate_dcache_range((unsigned long)(addr), \
 		ALIGN((unsigned long)(addr) + size, ARCH_DMA_MINALIGN))
-#else
-#define flush_dcache_buffer(addr, size)
-#define invalidate_dcache_buffer(addr, size)
-#endif
 
 /* Do not use sizeof(ed / td) as our ed / td structs contain extra members */
 #define flush_dcache_ed(addr) flush_dcache_buffer(addr, 16)
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index f52b4c1..47bd85b 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -18,7 +18,7 @@
 # define ohci_writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
 #endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
 
-#if defined CONFIG_DM_USB && ARCH_DMA_MINALIGN > 16
+#if ARCH_DMA_MINALIGN > 16
 #define ED_ALIGNMENT ARCH_DMA_MINALIGN
 #else
 #define ED_ALIGNMENT 16
-- 
1.9.1