[U-Boot] [PATCH] arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specified

[Stefano Babic]

On 18/05/2015 16:07, Tim Harvey wrote:
> Commit fa8b7d66f49f0c7bd41467fe78f6488d8af6976a introduced fast-exit support
> to the MMDC however enabling it on the DDR3 got missed. Make sure we enable
> it on the DDR3 as well.
> 
> Gateworks uses Micron memory as well as Winbond in MX6. We have found in
> testing that we need to enable fast-exit for Winbond stability. Gateworks
> boards are currently the only boards using the MX6 SPL and enabling
> fast-exit mode.
> 
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================