[U-Boot] [PATCH 1/4] x86: Refactor PIRQ routing support
Bin Meng
bmeng.cn at gmail.com
Wed May 20 09:55:03 CEST 2015
PIRQ routing is pretty much common in Intel chipset. It has several
PIRQ links (normally 8) and corresponding registers (either in PCI
configuration space or memory-mapped IBASE) to configure the legacy
8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing
support using device tree and move it to a common place, so that we
can easily add PIRQ routing support on a new platform.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---
arch/x86/cpu/Makefile | 2 +-
arch/x86/cpu/irq.c | 221 +++++++++++++++++++++
arch/x86/cpu/queensbay/Makefile | 2 +-
arch/x86/cpu/queensbay/irq.c | 242 -----------------------
arch/x86/cpu/queensbay/tnc.c | 39 +++-
arch/x86/dts/crownbay.dts | 54 +++++
arch/x86/include/asm/arch-queensbay/irq.h | 55 ------
arch/x86/include/asm/irq.h | 105 ++++++++++
include/dt-bindings/interrupt-router/intel-irq.h | 29 +++
include/fdtdec.h | 1 +
lib/fdtdec.c | 1 +
11 files changed, 451 insertions(+), 300 deletions(-)
create mode 100644 arch/x86/cpu/irq.c
delete mode 100644 arch/x86/cpu/queensbay/irq.c
delete mode 100644 arch/x86/include/asm/arch-queensbay/irq.h
create mode 100644 arch/x86/include/asm/irq.h
create mode 100644 include/dt-bindings/interrupt-router/intel-irq.h
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 307545a..7ff05e6 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/
obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/
obj-$(CONFIG_INTEL_QUARK) += quark/
obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
-obj-y += lapic.o
+obj-y += irq.o lapic.o
obj-$(CONFIG_SMP) += mp_init.o
obj-y += mtrr.o
obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c
new file mode 100644
index 0000000..32dc6f2
--- /dev/null
+++ b/arch/x86/cpu/irq.c
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/pirq_routing.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct irq_router irq_router;
+static struct irq_routing_table *pirq_routing_table;
+
+bool pirq_check_irq_routed(int link, u8 irq)
+{
+ u8 pirq;
+ int base = irq_router.link_base;
+
+ if (irq_router.config == PIRQ_VIA_PCI)
+ pirq = x86_pci_read_config8(irq_router.bdf,
+ LINK_N2V(link, base));
+ else
+ pirq = readb(irq_router.ibase + LINK_N2V(link, base));
+
+ pirq &= 0xf;
+
+ /* IRQ# 0/1/2/8/13 are reserved */
+ if (pirq < 3 || pirq == 8 || pirq == 13)
+ return false;
+
+ return pirq == irq ? true : false;
+}
+
+int pirq_translate_link(int link)
+{
+ return LINK_V2N(link, irq_router.link_base);
+}
+
+void pirq_assign_irq(int link, u8 irq)
+{
+ int base = irq_router.link_base;
+
+ /* IRQ# 0/1/2/8/13 are reserved */
+ if (irq < 3 || irq == 8 || irq == 13)
+ return;
+
+ if (irq_router.config == PIRQ_VIA_PCI)
+ x86_pci_write_config8(irq_router.bdf,
+ LINK_N2V(link, base), irq);
+ else
+ writeb(irq, irq_router.ibase + LINK_N2V(link, base));
+}
+
+static inline void fill_irq_info(struct irq_info **slotp, int *entries, u8 bus,
+ u8 device, u8 func, u8 pin, u8 pirq)
+{
+ struct irq_info *slot = *slotp;
+
+ slot->bus = bus;
+ slot->devfn = (device << 3) | func;
+ slot->irq[pin - 1].link = LINK_N2V(pirq, irq_router.link_base);
+ slot->irq[pin - 1].bitmap = irq_router.irq_mask;
+ (*entries)++;
+ (*slotp)++;
+}
+
+__weak int board_fill_irq_info(struct irq_info *slot)
+{
+ return 0;
+}
+
+__weak void cpu_irq_init(void)
+{
+ return;
+}
+
+static int create_pirq_routing_table(void)
+{
+ const void *blob = gd->fdt_blob;
+ struct fdt_pci_addr addr;
+ int node;
+ int len, count;
+ const u32 *cell;
+ struct irq_routing_table *rt;
+ struct irq_info *slot;
+ int irq_entries = 0;
+ int i;
+ int ret;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_IRQ_ROUTER);
+ if (node < 0) {
+ debug("%s: Cannot find irq router node\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = fdtdec_get_pci_addr(blob, node, FDT_PCI_SPACE_CONFIG,
+ "reg", &addr);
+ if (ret)
+ return ret;
+
+ /* extract the bdf from fdt_pci_addr */
+ irq_router.bdf = addr.phys_hi & 0xffff00;
+
+ ret = fdt_find_string(blob, node, "intel,pirq-config", "pci");
+ if (!ret) {
+ irq_router.config = PIRQ_VIA_PCI;
+ } else {
+ ret = fdt_find_string(blob, node, "intel,pirq-config", "ibase");
+ if (!ret)
+ irq_router.config = PIRQ_VIA_IBASE;
+ else
+ return -EINVAL;
+ }
+
+ ret = fdtdec_get_int_array(blob, node, "intel,pirq-link",
+ &irq_router.link_base, 1);
+ if (ret)
+ return ret;
+
+ irq_router.irq_mask = fdtdec_get_int(blob, node,
+ "intel,pirq-mask", PIRQ_BITMAP);
+
+ if (irq_router.config == PIRQ_VIA_IBASE) {
+ int ibase_off;
+
+ ibase_off = fdtdec_get_int(blob, node, "intel,ibase-offset", 0);
+ if (!ibase_off)
+ return -EINVAL;
+
+ /*
+ * Here we assume that the IBASE register has already been
+ * properly configured by U-Boot before.
+ *
+ * By 'valid' we mean:
+ * 1) a valid memory space carved within system memory space
+ * assigned to IBASE register block.
+ * 2) memory range decoding is enabled.
+ * Hence we don't do any santify test here.
+ */
+ irq_router.ibase = x86_pci_read_config32(irq_router.bdf,
+ ibase_off);
+ irq_router.ibase &= ~0xf;
+ }
+
+ cell = fdt_getprop(blob, node, "intel,pirq-routing", &len);
+ if (!cell)
+ return -EINVAL;
+
+ if ((len % sizeof(struct pirq_routing)) == 0)
+ count = len / sizeof(struct pirq_routing);
+ else
+ return -EINVAL;
+
+ rt = malloc(sizeof(struct irq_routing_table));
+ if (!rt)
+ return -ENOMEM;
+ memset((char *)rt, 0, sizeof(struct irq_routing_table));
+
+ /* Populate the PIRQ table fields */
+ rt->signature = PIRQ_SIGNATURE;
+ rt->version = PIRQ_VERSION;
+ rt->rtr_bus = 0;
+ rt->rtr_devfn = (PCI_DEV(irq_router.bdf) << 3) |
+ PCI_FUNC(irq_router.bdf);
+ rt->rtr_vendor = PCI_VENDOR_ID_INTEL;
+ rt->rtr_device = PCI_DEVICE_ID_INTEL_ICH7_31;
+
+ slot = rt->slots;
+
+ /* Now fill in the irq_info entries in the PIRQ table */
+ for (i = 0; i < count; i++) {
+ struct pirq_routing pr;
+
+ pr.bdf = fdt_addr_to_cpu(cell[0]);
+ pr.pin = fdt_addr_to_cpu(cell[1]);
+ pr.pirq = fdt_addr_to_cpu(cell[2]);
+
+ debug("irq_info %d: b.d.f %x.%x.%x INT%c PIRQ%c\n",
+ i, PCI_BUS(pr.bdf), PCI_DEV(pr.bdf),
+ PCI_FUNC(pr.bdf), 'A' + pr.pin - 1,
+ 'A' + pr.pirq);
+ fill_irq_info(&slot, &irq_entries, PCI_BUS(pr.bdf),
+ PCI_DEV(pr.bdf), PCI_FUNC(pr.bdf),
+ pr.pin, pr.pirq);
+ cell += sizeof(struct pirq_routing) / sizeof(u32);
+ }
+
+ /* Call board-specific routine to fill in add-in card's irq info */
+ irq_entries += board_fill_irq_info(slot);
+
+ rt->size = irq_entries * sizeof(struct irq_info) + 32;
+
+ pirq_routing_table = rt;
+
+ return 0;
+}
+
+void pirq_init(void)
+{
+ cpu_irq_init();
+
+ if (create_pirq_routing_table()) {
+ debug("Failed to create pirq routing table\n");
+ } else {
+ /* Route PIRQ */
+ pirq_route_irqs(pirq_routing_table->slots,
+ get_irq_slot_count(pirq_routing_table));
+ }
+}
+
+u32 write_pirq_routing_table(u32 addr)
+{
+ return copy_pirq_routing_table(addr, pirq_routing_table);
+}
diff --git a/arch/x86/cpu/queensbay/Makefile b/arch/x86/cpu/queensbay/Makefile
index 4599a48..d8761fd 100644
--- a/arch/x86/cpu/queensbay/Makefile
+++ b/arch/x86/cpu/queensbay/Makefile
@@ -5,5 +5,5 @@
#
obj-y += fsp_configs.o
-obj-y += irq.o tnc.o topcliff.o
+obj-y += tnc.o topcliff.o
obj-$(CONFIG_PCI) += tnc_pci.o
diff --git a/arch/x86/cpu/queensbay/irq.c b/arch/x86/cpu/queensbay/irq.c
deleted file mode 100644
index faf9515..0000000
--- a/arch/x86/cpu/queensbay/irq.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/post.h>
-#include <asm/processor.h>
-#include <asm/pirq_routing.h>
-#include <asm/arch/device.h>
-#include <asm/arch/tnc.h>
-#include <asm/arch/irq.h>
-
-static struct irq_routing_table *pirq_routing_table;
-
-bool pirq_check_irq_routed(int link, u8 irq)
-{
- u8 pirq;
-
- pirq = x86_pci_read_config8(TNC_LPC, LINK_N2V(link));
- pirq &= 0xf;
-
- /* IRQ# 0/1/2/8/13 are reserved */
- if (pirq < 3 || pirq == 8 || pirq == 13)
- return false;
-
- return pirq == irq ? true : false;
-}
-
-int pirq_translate_link(int link)
-{
- return LINK_V2N(link);
-}
-
-void pirq_assign_irq(int link, u8 irq)
-{
- /* IRQ# 0/1/2/8/13 are reserved */
- if (irq < 3 || irq == 8 || irq == 13)
- return;
-
- x86_pci_write_config8(TNC_LPC, LINK_N2V(link), irq);
-}
-
-static inline void fill_irq_info(struct irq_info **slotp, int *entries, u8 bus,
- u8 device, u8 func, u8 pin, u8 pirq)
-{
- struct irq_info *slot = *slotp;
-
- slot->bus = bus;
- slot->devfn = (device << 3) | func;
- slot->irq[pin - 1].link = LINK_N2V(pirq);
- slot->irq[pin - 1].bitmap = PIRQ_BITMAP;
- (*entries)++;
- (*slotp)++;
-}
-
-/* PCIe port downstream INTx swizzle */
-static inline u8 pin_swizzle(u8 pin, int port)
-{
- return (pin + port) % 4;
-}
-
-__weak int board_fill_irq_info(struct irq_info *slot)
-{
- return 0;
-}
-
-static int create_pirq_routing_table(void)
-{
- struct irq_routing_table *rt;
- struct irq_info *slot;
- int irq_entries = 0;
- pci_dev_t tcf_bdf;
- u8 tcf_bus, bus;
- int i;
-
- rt = malloc(sizeof(struct irq_routing_table));
- if (!rt)
- return -ENOMEM;
- memset((char *)rt, 0, sizeof(struct irq_routing_table));
-
- /* Populate the PIRQ table fields */
- rt->signature = PIRQ_SIGNATURE;
- rt->version = PIRQ_VERSION;
- rt->rtr_bus = 0;
- rt->rtr_devfn = (TNC_LPC_DEV << 3) | TNC_LPC_FUNC;
- rt->rtr_vendor = PCI_VENDOR_ID_INTEL;
- rt->rtr_device = PCI_DEVICE_ID_INTEL_ICH7_31;
-
- slot = rt->slots;
-
- /*
- * Now fill in the irq_info entries in the PIRQ table
- *
- * We start from internal TunnelCreek PCI devices first, then
- * followed by all the 4 PCIe ports downstream devices, including
- * the Queensbay platform Topcliff chipset devices.
- */
- fill_irq_info(&slot, &irq_entries, 0, TNC_IGD_DEV,
- TNC_IGD_FUNC, INTA, PIRQE);
- fill_irq_info(&slot, &irq_entries, 0, TNC_SDVO_DEV,
- TNC_SDVO_FUNC, INTA, PIRQF);
- fill_irq_info(&slot, &irq_entries, 0, TNC_HDA_DEV,
- TNC_HDA_FUNC, INTA, PIRQG);
- fill_irq_info(&slot, &irq_entries, 0, TNC_PCIE0_DEV,
- TNC_PCIE0_FUNC, INTA, PIRQE);
- fill_irq_info(&slot, &irq_entries, 0, TNC_PCIE1_DEV,
- TNC_PCIE1_FUNC, INTA, PIRQF);
- fill_irq_info(&slot, &irq_entries, 0, TNC_PCIE2_DEV,
- TNC_PCIE2_FUNC, INTA, PIRQG);
- fill_irq_info(&slot, &irq_entries, 0, TNC_PCIE3_DEV,
- TNC_PCIE3_FUNC, INTA, PIRQH);
-
- /* Check which PCIe port the Topcliff chipset is connected to */
- tcf_bdf = pci_find_device(PCI_VENDOR_ID_INTEL, 0x8800, 0);
- tcf_bus = PCI_BUS(tcf_bdf);
- for (i = 0; i < 4; i++) {
- bus = x86_pci_read_config8(PCI_BDF(0, TNC_PCIE0_DEV + i, 0),
- PCI_SECONDARY_BUS);
- if (bus == tcf_bus)
- break;
- }
-
- /* Fill in the Topcliff chipset devices' irq info */
- if (i < 4) {
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_PCIE_PORT_DEV,
- TCF_PCIE_PORT_FUNC, INTA, pin_swizzle(PIRQA, i));
-
- tcf_bus++;
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_0,
- TCF_GBE_FUNC, INTA, pin_swizzle(PIRQA, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_0,
- TCF_GPIO_FUNC, INTA, pin_swizzle(PIRQA, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_2,
- TCF_USB1_OHCI0_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_2,
- TCF_USB1_OHCI1_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_2,
- TCF_USB1_OHCI2_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_2,
- TCF_USB1_EHCI_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_2,
- TCF_USB_DEVICE_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_4,
- TCF_SDIO0_FUNC, INTC, pin_swizzle(PIRQC, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_4,
- TCF_SDIO1_FUNC, INTC, pin_swizzle(PIRQC, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_6,
- TCF_SATA_FUNC, INTD, pin_swizzle(PIRQD, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_8,
- TCF_USB2_OHCI0_FUNC, INTA, pin_swizzle(PIRQA, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_8,
- TCF_USB2_OHCI1_FUNC, INTA, pin_swizzle(PIRQA, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_8,
- TCF_USB2_OHCI2_FUNC, INTA, pin_swizzle(PIRQA, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_8,
- TCF_USB2_EHCI_FUNC, INTA, pin_swizzle(PIRQA, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_10,
- TCF_DMA1_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_10,
- TCF_UART0_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_10,
- TCF_UART1_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_10,
- TCF_UART2_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_10,
- TCF_UART3_FUNC, INTB, pin_swizzle(PIRQB, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_12,
- TCF_DMA2_FUNC, INTC, pin_swizzle(PIRQC, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_12,
- TCF_SPI_FUNC, INTC, pin_swizzle(PIRQC, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_12,
- TCF_I2C_FUNC, INTC, pin_swizzle(PIRQC, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_12,
- TCF_CAN_FUNC, INTC, pin_swizzle(PIRQC, i));
- fill_irq_info(&slot, &irq_entries, tcf_bus, TCF_DEV_12,
- TCF_1588_FUNC, INTC, pin_swizzle(PIRQC, i));
- }
-
- /* Call board-specific routine to fill in add-in card's irq info */
- irq_entries += board_fill_irq_info(slot);
-
- rt->size = irq_entries * sizeof(struct irq_info) + 32;
-
- pirq_routing_table = rt;
-
- return 0;
-}
-
-void pirq_init(void)
-{
- struct tnc_rcba *rcba;
- u32 base;
-
- base = x86_pci_read_config32(TNC_LPC, LPC_RCBA);
- base &= ~MEM_BAR_EN;
- rcba = (struct tnc_rcba *)base;
-
- /* Make sure all internal PCI devices are using INTA */
- writel(INTA, &rcba->d02ip);
- writel(INTA, &rcba->d03ip);
- writel(INTA, &rcba->d27ip);
- writel(INTA, &rcba->d31ip);
- writel(INTA, &rcba->d23ip);
- writel(INTA, &rcba->d24ip);
- writel(INTA, &rcba->d25ip);
- writel(INTA, &rcba->d26ip);
-
- /*
- * Route TunnelCreek PCI device interrupt pin to PIRQ
- *
- * Since PCIe downstream ports received INTx are routed to PIRQ
- * A/B/C/D directly and not configurable, we route internal PCI
- * device's INTx to PIRQ E/F/G/H.
- */
- writew(PIRQE, &rcba->d02ir);
- writew(PIRQF, &rcba->d03ir);
- writew(PIRQG, &rcba->d27ir);
- writew(PIRQH, &rcba->d31ir);
- writew(PIRQE, &rcba->d23ir);
- writew(PIRQF, &rcba->d24ir);
- writew(PIRQG, &rcba->d25ir);
- writew(PIRQH, &rcba->d26ir);
-
- if (create_pirq_routing_table()) {
- debug("Failed to create pirq routing table\n");
- } else {
- /* Route PIRQ */
- pirq_route_irqs(pirq_routing_table->slots,
- get_irq_slot_count(pirq_routing_table));
- }
-}
-
-u32 write_pirq_routing_table(u32 addr)
-{
- return copy_pirq_routing_table(addr, pirq_routing_table);
-}
diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
index b46a7e9..873de7b 100644
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -6,10 +6,11 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/pci.h>
#include <asm/post.h>
#include <asm/arch/device.h>
-#include <asm/arch/irq.h>
+#include <asm/arch/tnc.h>
#include <asm/fsp/fsp_support.h>
#include <asm/processor.h>
@@ -45,6 +46,42 @@ int arch_cpu_init(void)
return 0;
}
+void cpu_irq_init(void)
+{
+ struct tnc_rcba *rcba;
+ u32 base;
+
+ base = x86_pci_read_config32(TNC_LPC, LPC_RCBA);
+ base &= ~MEM_BAR_EN;
+ rcba = (struct tnc_rcba *)base;
+
+ /* Make sure all internal PCI devices are using INTA */
+ writel(INTA, &rcba->d02ip);
+ writel(INTA, &rcba->d03ip);
+ writel(INTA, &rcba->d27ip);
+ writel(INTA, &rcba->d31ip);
+ writel(INTA, &rcba->d23ip);
+ writel(INTA, &rcba->d24ip);
+ writel(INTA, &rcba->d25ip);
+ writel(INTA, &rcba->d26ip);
+
+ /*
+ * Route TunnelCreek PCI device interrupt pin to PIRQ
+ *
+ * Since PCIe downstream ports received INTx are routed to PIRQ
+ * A/B/C/D directly and not configurable, we route internal PCI
+ * device's INTx to PIRQ E/F/G/H.
+ */
+ writew(PIRQE, &rcba->d02ir);
+ writew(PIRQF, &rcba->d03ir);
+ writew(PIRQG, &rcba->d27ir);
+ writew(PIRQH, &rcba->d31ir);
+ writew(PIRQE, &rcba->d23ir);
+ writew(PIRQF, &rcba->d24ir);
+ writew(PIRQG, &rcba->d25ir);
+ writew(PIRQH, &rcba->d26ir);
+}
+
int arch_misc_init(void)
{
pirq_init();
diff --git a/arch/x86/dts/crownbay.dts b/arch/x86/dts/crownbay.dts
index fbdeade..d68efda 100644
--- a/arch/x86/dts/crownbay.dts
+++ b/arch/x86/dts/crownbay.dts
@@ -6,6 +6,8 @@
/dts-v1/;
+#include <dt-bindings/interrupt-router/intel-irq.h>
+
/include/ "skeleton.dtsi"
/include/ "serial.dtsi"
@@ -135,6 +137,58 @@
};
};
};
+
+ irq-router at 1f,0 {
+ reg = <0x0000f800 0 0 0 0>;
+ compatible = "intel,irq-router";
+ intel,pirq-config = "pci";
+ intel,pirq-link = <0x60 8>;
+ intel,pirq-mask = <0xdee0>;
+ intel,pirq-routing = <
+ /* TunnelCreek PCI devices */
+ PCI_BDF(0, 2, 0) INTA PIRQE
+ PCI_BDF(0, 3, 0) INTA PIRQF
+ PCI_BDF(0, 23, 0) INTA PIRQE
+ PCI_BDF(0, 24, 0) INTA PIRQF
+ PCI_BDF(0, 25, 0) INTA PIRQG
+ PCI_BDF(0, 26, 0) INTA PIRQH
+ PCI_BDF(0, 27, 0) INTA PIRQG
+ /*
+ * Topcliff PCI devices
+ *
+ * Note on the Crown Bay board, Topcliff chipset
+ * is connected to TunnelCreek PCIe port 0, so
+ * its bus number is 1 for its PCIe port and 2
+ * for its PCI devices per U-Boot currnet PCI
+ * bus enumeration algorithm.
+ */
+ PCI_BDF(1, 0, 0) INTA PIRQA
+ PCI_BDF(2, 0, 1) INTA PIRQA
+ PCI_BDF(2, 0, 2) INTA PIRQA
+ PCI_BDF(2, 2, 0) INTB PIRQB
+ PCI_BDF(2, 2, 1) INTB PIRQB
+ PCI_BDF(2, 2, 2) INTB PIRQB
+ PCI_BDF(2, 2, 3) INTB PIRQB
+ PCI_BDF(2, 2, 4) INTB PIRQB
+ PCI_BDF(2, 4, 0) INTC PIRQC
+ PCI_BDF(2, 4, 1) INTC PIRQC
+ PCI_BDF(2, 6, 0) INTD PIRQD
+ PCI_BDF(2, 8, 0) INTA PIRQA
+ PCI_BDF(2, 8, 1) INTA PIRQA
+ PCI_BDF(2, 8, 2) INTA PIRQA
+ PCI_BDF(2, 8, 3) INTA PIRQA
+ PCI_BDF(2, 10, 0) INTB PIRQB
+ PCI_BDF(2, 10, 1) INTB PIRQB
+ PCI_BDF(2, 10, 2) INTB PIRQB
+ PCI_BDF(2, 10, 3) INTB PIRQB
+ PCI_BDF(2, 10, 4) INTB PIRQB
+ PCI_BDF(2, 12, 0) INTC PIRQC
+ PCI_BDF(2, 12, 1) INTC PIRQC
+ PCI_BDF(2, 12, 2) INTC PIRQC
+ PCI_BDF(2, 12, 3) INTC PIRQC
+ PCI_BDF(2, 12, 4) INTC PIRQC
+ >;
+ };
};
};
diff --git a/arch/x86/include/asm/arch-queensbay/irq.h b/arch/x86/include/asm/arch-queensbay/irq.h
deleted file mode 100644
index e7f8616..0000000
--- a/arch/x86/include/asm/arch-queensbay/irq.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _ARCH_IRQ_H_
-#define _ARCH_IRQ_H_
-
-enum pci_int_pin {
- INTX,
- INTA,
- INTB,
- INTC,
- INTD
-};
-
-enum pirq_pin {
- PIRQA,
- PIRQB,
- PIRQC,
- PIRQD,
- PIRQE,
- PIRQF,
- PIRQG,
- PIRQH
-};
-
-/* PIRQ link number and value conversion */
-#define LINK_V2N(link) (link - 0x60)
-#define LINK_N2V(link) (link + 0x60)
-
-#define PIRQ_BITMAP 0xdee0
-
-struct irq_info;
-
-/**
- * board_fill_irq_info() - Board-specific irq_info fill routine
- *
- * This fills the irq_info table for any board-specific add-in cards.
- *
- * @slot: pointer to the struct irq_info that is to be filled in
- * @return: number of entries were written to the struct irq_info
- */
-int board_fill_irq_info(struct irq_info *slot);
-
-/**
- * pirq_init() - Initialize platform PIRQ routing
- *
- * This initializes the PIRQ routing on the platform and configures all PCI
- * devices' interrupt line register to a working IRQ number on the 8259 PIC.
- */
-void pirq_init(void);
-
-#endif /* _ARCH_IRQ_H_ */
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
new file mode 100644
index 0000000..a7ad462
--- /dev/null
+++ b/arch/x86/include/asm/irq.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ARCH_IRQ_H_
+#define _ARCH_IRQ_H_
+
+enum pci_int_pin {
+ INTX,
+ INTA,
+ INTB,
+ INTC,
+ INTD
+};
+
+enum pirq_pin {
+ PIRQA,
+ PIRQB,
+ PIRQC,
+ PIRQD,
+ PIRQE,
+ PIRQF,
+ PIRQG,
+ PIRQH
+};
+
+/**
+ * Intel interrupt router configuration mechanism
+ *
+ * There are two known ways of Intel interrupt router configuration mechanism
+ * so far. On most cases, the IRQ routing configuraiton is controlled by PCI
+ * configuraiton registers on the legacy bridge, normally PCI BDF(0, 31, 0).
+ * On some newer platforms like BayTrail and Braswell, the IRQ routing is now
+ * in the IBASE register block where IBASE is memory-mapped.
+ */
+enum pirq_config {
+ PIRQ_VIA_PCI,
+ PIRQ_VIA_IBASE
+};
+
+/**
+ * Intel interrupt router control block
+ *
+ * Its members' value will be filled in based on device tree's input.
+ *
+ * @config: PIRQ_VIA_PCI or PIRQ_VIA_IBASE
+ * @link_base: link value base number
+ * @irq_mask: IRQ mask reprenting the 16 IRQs in 8259, bit N is 1 means
+ * IRQ N is available to be routed
+ * @lb_bdf: irq router's PCI bus/device/function number encoding
+ * @ibase: IBASE register block base address
+ */
+struct irq_router {
+ int config;
+ u32 link_base;
+ u16 irq_mask;
+ u32 bdf;
+ u32 ibase;
+};
+
+struct pirq_routing {
+ int bdf;
+ int pin;
+ int pirq;
+};
+
+/* PIRQ link number and value conversion */
+#define LINK_V2N(link, base) (link - base)
+#define LINK_N2V(link, base) (link + base)
+
+#define PIRQ_BITMAP 0xdef8
+
+struct irq_info;
+
+/**
+ * board_fill_irq_info() - Board-specific irq_info fill routine
+ *
+ * This fills the irq_info table for any board-specific add-in cards.
+ *
+ * @slot: pointer to the struct irq_info that is to be filled in
+ * @return: number of entries were written to the struct irq_info
+ */
+int board_fill_irq_info(struct irq_info *slot);
+
+/**
+ * cpu_irq_init() - Initialize CPU IRQ routing
+ *
+ * This initializes some platform-specific registers related to IRQ routing,
+ * like configuring internal PCI devices to use which PCI interrupt pin,
+ * and which PCI interrupt pin is mapped to which PIRQ line. Note on some
+ * platforms, such IRQ routing might be hard-coded thus cannot configure.
+ */
+void cpu_irq_init(void);
+
+/**
+ * pirq_init() - Initialize platform PIRQ routing
+ *
+ * This initializes the PIRQ routing on the platform and configures all PCI
+ * devices' interrupt line register to a working IRQ number on the 8259 PIC.
+ */
+void pirq_init(void);
+
+#endif /* _ARCH_IRQ_H_ */
diff --git a/include/dt-bindings/interrupt-router/intel-irq.h b/include/dt-bindings/interrupt-router/intel-irq.h
new file mode 100644
index 0000000..41077ef
--- /dev/null
+++ b/include/dt-bindings/interrupt-router/intel-irq.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _DT_BINDINGS_INTEL_IRQ_H_
+#define _DT_BINDINGS_INTEL_IRQ_H_
+
+/* PCI interrupt pin */
+#define INTA 1
+#define INTB 2
+#define INTC 3
+#define INTD 4
+
+/* PIRQs */
+#define PIRQA 0
+#define PIRQB 1
+#define PIRQC 2
+#define PIRQD 3
+#define PIRQE 4
+#define PIRQF 5
+#define PIRQG 6
+#define PIRQH 7
+
+/* PCI bdf encoding */
+#define PCI_BDF(b, d, f) ((b) << 16 | (d) << 11 | (f) << 8)
+
+#endif /* _DT_BINDINGS_INTEL_IRQ_H_ */
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 6590470..dc1c85b 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -177,6 +177,7 @@ enum fdt_compat_id {
COMPAT_INTEL_QRK_MRC, /* Intel Quark MRC */
COMPAT_SOCIONEXT_XHCI, /* Socionext UniPhier xHCI */
COMPAT_INTEL_PCH, /* Intel PCH */
+ COMPAT_INTEL_IRQ_ROUTER, /* Intel Interrupt Router */
COMPAT_COUNT,
};
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 80b897a..22d1e39 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -76,6 +76,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(INTEL_QRK_MRC, "intel,quark-mrc"),
COMPAT(SOCIONEXT_XHCI, "socionext,uniphier-xhci"),
COMPAT(COMPAT_INTEL_PCH, "intel,bd82x6x"),
+ COMPAT(COMPAT_INTEL_IRQ_ROUTER, "intel,irq-router"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
--
1.8.2.1
More information about the U-Boot
mailing list