[U-Boot] [PATCH] arm: ls102xa: Adjust the load address of U-Boot for NOR boot

York Sun yorksun at freescale.com
Fri May 22 22:56:28 CEST 2015



On 04/21/2015 01:04 AM, Alison Wang wrote:
> The original load address of U-Boot is 0x67f80000. The address
> space of NOR flash is 0x60000000 to 0x67ffffff. It will cause
> the size of u-boot couldn't be larger than 512K. As more features
> are supported in u-boot, the size of u-boot is larger than 512K.
> 
> To fix this issue, the load address of U-Boot for NOR boot is
> adjusted to 0x60100000.
> 
> In RCW, the PBI command needs to change as follows:
>  .pbi
> -write 0xee0200, 0x67f80000
> +write 0xee0200, 0x60100000
>  .end
> 
> Signed-off-by: Alison Wang <alison.wang at freescale.com>
> ---

Applied to u-boot-fsl-qoriq master. Awaiting upstream.

York



More information about the U-Boot mailing list