[U-Boot] [PATCH V4 1/4] sunxi/nand: change BLOCK_SIZE in mksunxiboot to match NAND block size

[Roy Spliet]

From: Daniel Kochmański <dkochmanski at turtle-solutions.eu>

This change is necessary to calculate correct checksum for NAND
boot. Works both for MMC and NAND. Without it BROM rejects boot image
as invalid (bad checksum). (Changes block size from 0x200 to 0x2000).

V2: Document decision in source too

Signed-off-by: Daniel Kochmański <dkochmanski at turtle-solutions.eu>
Signed-off-by: Roy Spliet <r.spliet at ultimaker.com>
Cc: Ian Campbell <ijc at hellion.org.uk>
Cc: Hans De Goede <hdegoede at redhat.com>
Reviewed-by: Hans de Goede <hdegoede at redhat.com>
---
 tools/mksunxiboot.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c
index 0035f6e..3361251 100644
--- a/tools/mksunxiboot.c
+++ b/tools/mksunxiboot.c
@@ -65,7 +65,13 @@ int gen_check_sum(struct boot_file_head *head_p)
 
 #define SUN4I_SRAM_SIZE 0x7600	/* 0x7748+ is used by BROM */
 #define SRAM_LOAD_MAX_SIZE (SUN4I_SRAM_SIZE - sizeof(struct boot_file_head))
-#define BLOCK_SIZE 512
+
+/*
+ * BROM (at least on A10 and A20) requires NAND-images to be explicitly aligned
+ * to a multiple of 8K, and rejects the image otherwise. MMC-images are fine
+ * with 512B blocks. To cater for both, align to the largest of the two.
+ */
+#define BLOCK_SIZE 0x2000
 
 struct boot_img {
 	struct boot_file_head header;
-- 
2.1.0


-- 


IMAGINE IT >> MAKE IT

Meet us online at Twitter <http://twitter.com/ultimaker>, Facebook 
<http://facebook.com/ultimaker>, Google+ <http://google.com/+Ultimaker>

www.ultimaker.com