[U-Boot] [PATCH] env_mmc: add error message to pass to set_default_env
Tim Harvey
tharvey at gateworks.com
Wed May 27 15:18:40 CEST 2015
On Fri, May 8, 2015 at 2:52 PM, Tim Harvey <tharvey at gateworks.com> wrote:
> Add an error message that gets passed to set_default_env() like
> env_nand implements. This message is displayed to the user as the
> reason for falling back to the default environment.
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
> common/env_mmc.c | 40 ++++++++++++++++++++++++----------------
> 1 file changed, 24 insertions(+), 16 deletions(-)
>
> diff --git a/common/env_mmc.c b/common/env_mmc.c
> index 14648e3..6c4ce2f 100644
> --- a/common/env_mmc.c
> +++ b/common/env_mmc.c
> @@ -90,19 +90,18 @@ static int mmc_set_env_part(struct mmc *mmc)
> static inline int mmc_set_env_part(struct mmc *mmc) {return 0; };
> #endif
>
> -static int init_mmc_for_env(struct mmc *mmc)
> +static const char *init_mmc_for_env(struct mmc *mmc)
> {
> - if (!mmc) {
> - puts("No MMC card found\n");
> - return -1;
> - }
> + if (!mmc)
> + return "No MMC card found";
>
> - if (mmc_init(mmc)) {
> - puts("MMC init failed\n");
> - return -1;
> - }
> + if (mmc_init(mmc))
> + return "MMC init failed";
> +
> + if (mmc_set_env_part(mmc))
> + return "MMC partition switch failed";
>
> - return mmc_set_env_part(mmc);
> + return NULL;
> }
>
> static void fini_mmc_for_env(struct mmc *mmc)
> @@ -143,9 +142,13 @@ int saveenv(void)
> struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
> u32 offset;
> int ret, copy = 0;
> + const char *errmsg;
>
> - if (init_mmc_for_env(mmc))
> + errmsg = init_mmc_for_env(mmc);
> + if (errmsg) {
> + printf("%s\n", errmsg);
> return 1;
> + }
>
> ret = env_export(env_new);
> if (ret)
> @@ -213,6 +216,7 @@ void env_relocate_spec(void)
> env_t *ep;
> int ret;
> int dev = CONFIG_SYS_MMC_ENV_DEV;
> + const char *errmsg = NULL;
>
> ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env1, 1);
> ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env2, 1);
> @@ -223,7 +227,8 @@ void env_relocate_spec(void)
>
> mmc = find_mmc_device(dev);
>
> - if (init_mmc_for_env(mmc)) {
> + errmsg = init_mmc_for_env(mmc);
> + if (errmsg) {
> ret = 1;
> goto err;
> }
> @@ -249,6 +254,7 @@ void env_relocate_spec(void)
> (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc);
>
> if (!crc1_ok && !crc2_ok) {
> + errmsg = "!bad CRC";
> ret = 1;
> goto fini;
> } else if (crc1_ok && !crc2_ok) {
> @@ -284,8 +290,7 @@ fini:
> fini_mmc_for_env(mmc);
> err:
> if (ret)
> - set_default_env(NULL);
> -
> + set_default_env(errmsg);
> #endif
> }
> #else /* ! CONFIG_ENV_OFFSET_REDUND */
> @@ -297,6 +302,7 @@ void env_relocate_spec(void)
> u32 offset;
> int ret;
> int dev = CONFIG_SYS_MMC_ENV_DEV;
> + const char *errmsg;
>
> #ifdef CONFIG_SPL_BUILD
> dev = 0;
> @@ -304,7 +310,8 @@ void env_relocate_spec(void)
>
> mmc = find_mmc_device(dev);
>
> - if (init_mmc_for_env(mmc)) {
> + errmsg = init_mmc_for_env(mmc);
> + if (errmsg) {
> ret = 1;
> goto err;
> }
> @@ -315,6 +322,7 @@ void env_relocate_spec(void)
> }
>
> if (read_env(mmc, CONFIG_ENV_SIZE, offset, buf)) {
> + errmsg = "!read failed";
> ret = 1;
> goto fini;
> }
> @@ -326,7 +334,7 @@ fini:
> fini_mmc_for_env(mmc);
> err:
> if (ret)
> - set_default_env(NULL);
> + set_default_env(errmsg);
> #endif
> }
> #endif /* CONFIG_ENV_OFFSET_REDUND */
> --
> 1.9.1
>
Tom,
I'm thinking I should have sent the above patch to you for lack of a
clear maintainer of this file/section?
Regards,
Tim
More information about the U-Boot
mailing list