[U-Boot] [PATCH 1/4] zynqmp: gem: Set data bus with to 64bit for arm64

[Michal Simek]

On 05/27/2015 08:08 PM, Joe Hershberger wrote:
> Hi Michal,
> 
> On Tue, May 26, 2015 at 6:40 AM, Michal Simek <michal.simek at xilinx.com> wrote:
>> From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
>>
>> Set the data bus width to 64-bit AMBA Databus width in config register.
>>
>> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
>> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
>> ---
>>
>>  drivers/net/zynq_gem.c | 9 ++++++++-
>>  1 file changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
>> index c723dbb0a694..22195805e6d6 100644
>> --- a/drivers/net/zynq_gem.c
>> +++ b/drivers/net/zynq_gem.c
>> @@ -58,7 +58,14 @@
>>  #define ZYNQ_GEM_NWCFG_MDCCLKDIV       0x000080000 /* Div pclk by 32, 80MHz */
>>  #define ZYNQ_GEM_NWCFG_MDCCLKDIV2      0x0000c0000 /* Div pclk by 48, 120MHz */
>>
>> -#define ZYNQ_GEM_NWCFG_INIT            (ZYNQ_GEM_NWCFG_FDEN | \
>> +#ifdef CONFIG_TARGET_XILINX_ZYNQMP
> 
> Isn't there a more explicit define you can use to select this such as
> CONFIG_ARM64?

No problem to use it - fixed in v2.

> 
>> +# define ZYNQ_GEM_DBUS_WIDTH   (1 << 21) /* 64 bit bus */
>> +#else
>> +# define ZYNQ_GEM_DBUS_WIDTH   (0 << 21) /* 32 bit bus */
>> +#endif
>> +
>> +#define ZYNQ_GEM_NWCFG_INIT            (ZYNQ_GEM_DBUS_WIDTH | \
>> +                                       ZYNQ_GEM_NWCFG_FDEN | \
>>                                         ZYNQ_GEM_NWCFG_FSREM | \
>>                                         ZYNQ_GEM_NWCFG_MDCCLKDIV)
> 
> There is a typo in the subject.  with->width.

Fixed too in v2.

Thanks,
Michal