[U-Boot] [PATCH 11/22][v2] armv8/ls2085RDB: Update board version print logic

[Prabhakar Kushwaha]

As per updated board document, no need to substract 1 from arch[BRD]
bit field. Default value + 'A' represents the board revision.

So update board version print logic to reflect the same.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
Changes for v2: sending as it is for patch set

 board/freescale/ls2085ardb/ls2085ardb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2085ardb/ls2085ardb.c
index e0a8a41..ff4b6a0 100644
--- a/board/freescale/ls2085ardb/ls2085ardb.c
+++ b/board/freescale/ls2085ardb/ls2085ardb.c
@@ -56,7 +56,7 @@ int checkboard(void)
 	sw = QIXIS_READ(arch);
 	printf("Board: %s, ", CONFIG_IDENT_STRING);
 	printf("Board Arch: V%d, ", sw >> 4);
-	printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+	printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
 
 	sw = QIXIS_READ(brdcfg[0]);
 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-- 
1.9.1