[U-Boot] [PATCH 17/22][v2] armv8/ls2085a: Expose all DDR region(s) to Linux
Prabhakar Kushwaha
prabhakar at freescale.com
Thu May 28 11:24:10 CEST 2015
From: Bhupesh Sharma <bhupesh.sharma at freescale.com>
This patch allows u-boot to expose the complete DDR region(s) to Linux
(after subtracting the memory hidden via MEM_TOP_HIDE mechanism).
This allows the u-boot to support the 48-bit VA support provided by
ARM64 Linux in flavors 3.18 and above, by passing the appropriate
'memory' DTS nodes.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
Changes for v2: sending as it is for patch set
board/freescale/ls2085a/README | 11 +++++++++++
board/freescale/ls2085a/ls2085a.c | 15 +++++++++------
board/freescale/ls2085aqds/README | 19 +++++++++++++++++++
board/freescale/ls2085aqds/ls2085aqds.c | 15 +++++++++------
board/freescale/ls2085ardb/README | 11 +++++++++++
board/freescale/ls2085ardb/ls2085ardb.c | 15 +++++++++------
6 files changed, 68 insertions(+), 18 deletions(-)
diff --git a/board/freescale/ls2085a/README b/board/freescale/ls2085a/README
index b7023e1..bc1d0bb 100644
--- a/board/freescale/ls2085a/README
+++ b/board/freescale/ls2085a/README
@@ -14,3 +14,14 @@ Memory map from core's view
Other addresses are either reserved, or not used directly by u-boot.
This list should be updated when more addresses are used.
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+ earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+ hugepages=16 mem=2048M'
+
diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c
index dd0acf2..e43dd4c 100644
--- a/board/freescale/ls2085a/ls2085a.c
+++ b/board/freescale/ls2085a/ls2085a.c
@@ -127,15 +127,18 @@ void fdt_fixup_board_enet(void *fdt)
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
- phys_addr_t base;
- phys_size_t size;
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
ft_cpu_setup(blob, bd);
- /* limit the memory size to bank 1 until Linux can handle 40-bit PA */
- base = getenv_bootm_low();
- size = getenv_bootm_size();
- fdt_fixup_memory(blob, (u64)base, (u64)size);
+ /* fixup DT for the two GPP DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2085aqds/README
index fb3938e..11b2e79 100644
--- a/board/freescale/ls2085aqds/README
+++ b/board/freescale/ls2085aqds/README
@@ -127,3 +127,22 @@ b) NOR boot
c) NAND boot
d) SD boot
e) QSPI boot
+
+Environment Variables
+---------------------
+- mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
+ the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
+
+- mcmemsize: MC DRAM block size. If this variable is not defined
+ the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+ earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+ hugepages=16 mem=2048M'
+
diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2085aqds/ls2085aqds.c
index 27a23ec..9b57799 100644
--- a/board/freescale/ls2085aqds/ls2085aqds.c
+++ b/board/freescale/ls2085aqds/ls2085aqds.c
@@ -244,15 +244,18 @@ void fdt_fixup_board_enet(void *fdt)
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
- phys_addr_t base;
- phys_size_t size;
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
ft_cpu_setup(blob, bd);
- /* limit the memory size to bank 1 until Linux can handle 40-bit PA */
- base = getenv_bootm_low();
- size = getenv_bootm_size();
- fdt_fixup_memory(blob, (u64)base, (u64)size);
+ /* fixup DT for the two GPP DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
diff --git a/board/freescale/ls2085ardb/README b/board/freescale/ls2085ardb/README
index cfd5185..2f18243 100644
--- a/board/freescale/ls2085ardb/README
+++ b/board/freescale/ls2085ardb/README
@@ -107,3 +107,14 @@ Booting Options
---------------
a) NOR boot
b) NAND boot
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+ earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+ hugepages=16 mem=2048M'
+
diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2085ardb/ls2085ardb.c
index abe2114..15cb251 100644
--- a/board/freescale/ls2085ardb/ls2085ardb.c
+++ b/board/freescale/ls2085ardb/ls2085ardb.c
@@ -241,15 +241,18 @@ void fdt_fixup_board_enet(void *fdt)
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
- phys_addr_t base;
- phys_size_t size;
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
ft_cpu_setup(blob, bd);
- /* limit the memory size to bank 1 until Linux can handle 40-bit PA */
- base = getenv_bootm_low();
- size = getenv_bootm_size();
- fdt_fixup_memory(blob, (u64)base, (u64)size);
+ /* fixup DT for the two GPP DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
--
1.9.1
More information about the U-Boot
mailing list