[U-Boot] [PATCH 5/8] ARM: sunxi: Add sun6i specific PSCI implementation

Maxime Ripard maxime.ripard at free-electrons.com
Thu May 28 17:22:32 CEST 2015


On Thu, May 28, 2015 at 09:25:31PM +0800, Chen-Yu Tsai wrote:
> This adds PSCI support for sun6i. So far it only supports
> the PWR_ON method.
> 
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
>  arch/arm/cpu/armv7/sunxi/Makefile     |   1 +
>  arch/arm/cpu/armv7/sunxi/psci_sun6i.S | 276 ++++++++++++++++++++++++++++++++++
>  2 files changed, 277 insertions(+)
>  create mode 100644 arch/arm/cpu/armv7/sunxi/psci_sun6i.S
> 
> diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
> index 85fbc85..4b783e0 100644
> --- a/arch/arm/cpu/armv7/sunxi/Makefile
> +++ b/arch/arm/cpu/armv7/sunxi/Makefile
> @@ -35,6 +35,7 @@ obj-$(CONFIG_AXP221_POWER)	+= pmic_bus.o
>  
>  ifndef CONFIG_SPL_BUILD
>  ifdef CONFIG_ARMV7_PSCI
> +obj-$(CONFIG_MACH_SUN6I)	+= psci_sun6i.o
>  obj-$(CONFIG_MACH_SUN7I)	+= psci_sun7i.o
>  endif
>  endif
> diff --git a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S
> new file mode 100644
> index 0000000..2516804
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S
> @@ -0,0 +1,276 @@
> +/*
> + * Copyright (C) 2015 - Chen-Yu Tsai
> + * Author: Chen-Yu Tsai <wens at csie.org>
> + *
> + * Based on psci_sun7i.S by Marc Zyngier <marc.zyngier at arm.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <config.h>
> +#include <asm/gic.h>
> +#include <asm/macro.h>
> +#include <asm/psci.h>
> +#include <asm/arch/cpu.h>
> +
> +/*
> + * Memory layout:
> + *
> + * SECURE_RAM to text_end :
> + *	._secure_text section
> + * text_end to ALIGN_PAGE(text_end):
> + *	nothing
> + * ALIGN_PAGE(text_end) to ALIGN_PAGE(text_end) + 0x1000)
> + *	1kB of stack per CPU (4 CPUs max).
> + */
> +
> +	.pushsection ._secure.text, "ax"
> +
> +	.arch_extension sec
> +
> +#define	ONE_MS			(CONFIG_TIMER_CLK_FREQ / 1000)
> +#define	TEN_MS			(10 * ONE_MS)
> +#define	GICD_BASE		0x1c81000
> +#define	GICC_BASE		0x1c82000
> +
> +.macro	timer_wait	reg, ticks
> +	@ Program CNTP_TVAL
> +	movw	\reg, #(\ticks & 0xffff)
> +	movt	\reg, #(\ticks >> 16)
> +	mcr	p15, 0, \reg, c14, c2, 0
> +	isb
> +	@ Enable physical timer, mask interrupt
> +	mov	\reg, #3
> +	mcr	p15, 0, \reg, c14, c2, 1
> +	@ Poll physical timer until ISTATUS is on
> +1:	isb
> +	mrc	p15, 0, \reg, c14, c2, 1
> +	ands	\reg, \reg, #4
> +	bne	1b
> +	@ Disable timer
> +	mov	\reg, #0
> +	mcr	p15, 0, \reg, c14, c2, 1
> +	isb
> +.endm
> +

I think I saw some patch to factorize that out. In the Tegra K1 PSCI
patches iirc.

> +.globl	psci_fiq_enter
> +psci_fiq_enter:
> +	push	{r0-r12}
> +
> +	@ Switch to secure
> +	mrc	p15, 0, r7, c1, c1, 0
> +	bic	r8, r7, #1
> +	mcr	p15, 0, r8, c1, c1, 0
> +	isb
> +
> +	@ Validate reason based on IAR and acknowledge
> +	movw	r8, #(GICC_BASE & 0xffff)
> +	movt	r8, #(GICC_BASE >> 16)
> +	ldr	r9, [r8, #GICC_IAR]
> +	movw	r10, #0x3ff
> +	movt	r10, #0
> +	cmp	r9, r10			@ skip spurious interrupt 1023
> +	beq	out
> +	movw	r10, #0x3fe		@ ...and 1022

Maybe we could add some defines for these spurious interrupts values ?

> +.globl	psci_arch_init
> +psci_arch_init:
> +	mov	r6, lr
> +
> +	movw	r4, #(GICD_BASE & 0xffff)
> +	movt	r4, #(GICD_BASE >> 16)
> +
> +	ldr	r5, [r4, #GICD_IGROUPRn]
> +	bic	r5, r5, #(1 << 15) 	@ SGI15 as Group-0
> +	str	r5, [r4, #GICD_IGROUPRn]
> +
> +	mov	r5, #0			@ Set SGI15 priority to 0
> +	strb	r5, [r4, #(GICD_IPRIORITYRn + 15)]
> +
> +	add	r4, r4, #0x1000		@ GICC address
> +
> +	mov	r5, #0xff
> +	str	r5, [r4, #GICC_PMR]	@ Be cool with non-secure
> +
> +	ldr	r5, [r4, #GICC_CTLR]
> +	orr	r5, r5, #(1 << 3)	@ Switch FIQEn on
> +	str	r5, [r4, #GICC_CTLR]
> +
> +	mrc	p15, 0, r5, c1, c1, 0	@ Read SCR
> +	orr	r5, r5, #4		@ Enable FIQ in monitor mode
> +	bic	r5, r5, #1		@ Secure mode
> +	mcr	p15, 0, r5, c1, c1, 0	@ Write SCR
> +	isb
> +
> +	bl	psci_get_cpu_id		@ CPU ID => r0
> +	bl	psci_get_cpu_stack_top	@ stack top => r0
> +	mov	sp, r0
> +
> +	bx	r6
> +
> +	.globl psci_text_end

Isn't it exactly the same function than the A20's? Maybe that can be
shared?

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150528/faf0f502/attachment.sig>


More information about the U-Boot mailing list