[U-Boot] Query on weak function for board specific initialisation

[maitysanchayan at gmail.com]

Hello Jeroen,

On 15-05-30 16:44:32, Jeroen Hofstee wrote:
> Hello Maity,
> 
> On 30-04-15 14:57, maitysanchayan at gmail.com wrote:
> >Hello,
> >
> >I am trying to use a weak function in able to provide a board specific
> >initialisation. To be more specific, I am trying to use the __weak
> >board_ehci_hcd_init function in the usb driver code which is called in
> >ehci_hcd_init, the strong function being defined in the board file.
> >This is on lines similar to what I see in the ehci-mx6 driver and some
> >mx6 board files like nitrogen's.
> >
> >Getting a linker error on compiling which is perplexing me at the
> >moment.
> >
> >[snip]
> >drivers/usb/host/built-in.o: In function `ehci_hcd_init':
> >/home/sanchayan/uboot/u-boot/drivers/usb/host/ehci-vf.c:185:
> >undefined reference to `board_echi_hcd_init'
> >/home/sanchayan/gcc-linaro/bin/arm-linux-gnueabihf-ld.bfd: BFD
> >(crosstool-NG linaro-1.13.1-2012.09-20120921 - Linaro GCC 2012.09) 2.22
> >assertion fail
> >/cbuild/slaves/oort14/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/src/binutils-2.22/bfd/elf32-arm.c:7498
> >/home/sanchayan/gcc-linaro/bin/arm-linux-gnueabihf-ld.bfd: BFD
> >(crosstool-NG linaro-1.13.1-2012.09-20120921 - Linaro GCC 2012.09) 2.22
> >assertion fail
> >/cbuild/slaves/oort14/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/src/binutils-2.22/bfd/elf32-arm.c:13830
> >/bin/sh: line 1:  1110 Segmentation fault      (core dumped)
> >
> >Perhaps I am overlooking something trivial?
> 
> 
> I suppose you found this already, but for completeness, you made a typo:
> 
> board_ehci_hcd_init
> board_echi_hcd_init
> 
> To prevent trouble like this, the compiler should actually be set to warn
> if there is no prototype...

Yes, I found the error and also posted the patch. Thanks for the tip, I do
not have that switch turned on, will do so. Lack of sleep and resulting
lack of attention to detail resulted in the trivial noise post :).