[U-Boot] [PATCH 2/2] net: zynq: Add support for different PHY interface types

[Joe Hershberger]

On Tue, Oct 27, 2015 at 10:06 AM, Michal Simek <michal.simek at xilinx.com> wrote:
> MII is setup by default for all cases. The most of boards are using
> RGMII but PHY drivers are not doing any specific setting that's why MII
> setting was working fine. With TI DP83867 is necessary to setup
> paramaters based on interface type.
>
> Use one setting per board for it which is something what will be removed
> when driver is moved to DM.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>

Acked-by: Joe Hershberger <joe.hershberger at ni.com>