[U-Boot] [PATCH] nios2: use common sequence for reserve_uboot

[Thomas Chou]

On 2015年10月27日 11:24, Thomas Chou wrote:
> Use common sequence for reserve_uboot, as the result is
> the same.
>
> Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
> ---
>   common/board_f.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>

Applied to u-boot-nios.

> diff --git a/common/board_f.c b/common/board_f.c
> index d88ada3..64c33b3 100644
> --- a/common/board_f.c
> +++ b/common/board_f.c
> @@ -894,7 +894,7 @@ static init_fnc_t init_sequence_f[] = {
>   	 *  - board info struct
>   	 */
>   	setup_dest_addr,
> -#if defined(CONFIG_BLACKFIN) || defined(CONFIG_NIOS2)
> +#if defined(CONFIG_BLACKFIN)
>   	/* Blackfin u-boot monitor should be on top of the ram */
>   	reserve_uboot,
>   #endif
> @@ -919,7 +919,7 @@ static init_fnc_t init_sequence_f[] = {
>   		!defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K)
>   	reserve_video,
>   #endif
> -#if !defined(CONFIG_BLACKFIN) && !defined(CONFIG_NIOS2)
> +#if !defined(CONFIG_BLACKFIN)
>   	reserve_uboot,
>   #endif
>   #ifndef CONFIG_SPL_BUILD
>