[U-Boot] [PATCH 2/3] arm: at91/spl: matrix: improve implementation of matrix

Wenyou Yang wenyou.yang at atmel.com
Wed Nov 4 07:28:05 CET 2015


To make matrix initialization code sharing with others,
use the matrix slave id macros, instead of hard-coding.

Remove the write protection mode code, it is unneeded for
writing registers.

Remove the security peripheral selecting code, it is
unneeded for SPL use-case.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---

 arch/arm/mach-at91/include/mach/sama5d4.h |   25 +++++++++++++++++++++
 arch/arm/mach-at91/matrix.c               |   35 ++++++++---------------------
 2 files changed, 34 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h
index 3da8aff..449cf0e 100644
--- a/arch/arm/mach-at91/include/mach/sama5d4.h
+++ b/arch/arm/mach-at91/include/mach/sama5d4.h
@@ -179,6 +179,31 @@
 #define CPU_HAS_PCR
 #define CPU_HAS_H32MXDIV
 
+/* MATRIX0(H64MX) slave id definitions */
+#define H64MX_SLAVE_AXIMX_BRIDGE	0	/* Bridge from H64MX to AXIMX */
+#define H64MX_SLAVE_PERIPH_BRIDGE	1	/* H64MX Peripheral Bridge */
+#define H64MX_SLAVE_VDEC		2	/* Video Decoder */
+#define H64MX_SLAVE_DDRC_PORT0		3	/* DDR2 Port0-AESOTF */
+#define H64MX_SLAVE_DDRC_PORT1		4	/* DDR2 Port1 */
+#define H64MX_SLAVE_DDRC_PORT2		5	/* DDR2 Port2 */
+#define H64MX_SLAVE_DDRC_PORT3		6	/* DDR2 Port3 */
+#define H64MX_SLAVE_DDRC_PORT4		7	/* DDR2 Port4 */
+#define H64MX_SLAVE_DDRC_PORT5		8	/* DDR2 Port5 */
+#define H64MX_SLAVE_DDRC_PORT6		9	/* DDR2 Port6 */
+#define H64MX_SLAVE_DDRC_PORT7		10	/* DDR2 Port7 */
+#define H64MX_SLAVE_SRAM		11	/* Internal SRAM 128K */
+#define H64MX_SLAVE_H32MX_BRIDGE	12	/* Bridge from H64MX to H32MX */
+
+/* MATRIX1(H32MX) slave id definitions */
+#define H32MX_SLAVE_H64MX_BRIDGE	0	/* Bridge from H32MX to H64MX */
+#define H32MX_SLAVE_PERIPH_BRIDGE0	1	/* H32MX Peripheral Bridge 0 */
+#define H32MX_SLAVE_PERIPH_BRIDGE1	2	/* H32MX Peripheral Bridge 1 */
+#define H32MX_SLAVE_EBI			3	/* External Bus Interface */
+#define H32MX_SLAVE_NFC_CMD		3	/* NFC command Register */
+#define H32MX_SLAVE_NFC_SRAM		4	/* NFC SRAM */
+#define H32MX_SLAVE_USB			5	/* USB Device & Host */
+#define H32MX_SLAVE_SMD			6	/* Soft Modem (SMD) */
+
 /* sama5d4 series chip id definitions */
 #define ARCH_ID_SAMA5D4		0x8a5c07c0
 #define ARCH_EXID_SAMA5D41	0x00000001
diff --git a/arch/arm/mach-at91/matrix.c b/arch/arm/mach-at91/matrix.c
index cf36386..57d7270 100644
--- a/arch/arm/mach-at91/matrix.c
+++ b/arch/arm/mach-at91/matrix.c
@@ -15,37 +15,20 @@ void matrix_init(void)
 	struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1;
 	int i;
 
-	/* Disable the write protect */
-	writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
-	writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
-
-	/* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */
-	for (i = 4; i <= 10; i++) {
+	/* DDR port 1 ~ port 7 */
+	for (i = H64MX_SLAVE_DDRC_PORT1; i <= H64MX_SLAVE_DDRC_PORT7; i++) {
 		writel(0x000f0f0f, &h64mx->ssr[i]);
 		writel(0x0000ffff, &h64mx->sassr[i]);
 		writel(0x0000000f, &h64mx->srtsr[i]);
 	}
 
-	/* CS3 */
-	writel(0x00c0c0c0, &h32mx->ssr[3]);
-	writel(0xff000000, &h32mx->sassr[3]);
-	writel(0xff000000, &h32mx->srtsr[3]);
+	/* EBI CS3 (NANDFlash 128M) and NFC Command Registers(128M) */
+	writel(0x00c0c0c0, &h32mx->ssr[H32MX_SLAVE_EBI]);
+	writel(0xff000000, &h32mx->sassr[H32MX_SLAVE_EBI]);
+	writel(0xff000000, &h32mx->srtsr[H32MX_SLAVE_EBI]);
 
 	/* NFC SRAM */
-	writel(0x00010101, &h32mx->ssr[4]);
-	writel(0x00000001, &h32mx->sassr[4]);
-	writel(0x00000001, &h32mx->srtsr[4]);
-
-	/* Configure Programmable Security peripherals on matrix 64 */
-	writel(readl(&h64mx->spselr[0]) | 0x00080000, &h64mx->spselr[0]);
-	writel(readl(&h64mx->spselr[1]) | 0x00180000, &h64mx->spselr[1]);
-	writel(readl(&h64mx->spselr[2]) | 0x00000008, &h64mx->spselr[2]);
-
-	/* Configure Programmable Security peripherals on matrix 32 */
-	writel(readl(&h32mx->spselr[0]) | 0xFFC00000, &h32mx->spselr[0]);
-	writel(readl(&h32mx->spselr[1]) | 0x60E3FFFF, &h32mx->spselr[1]);
-
-	/* Enable the write protect */
-	writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
-	writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
+	writel(0x00010101, &h32mx->ssr[H32MX_SLAVE_NFC_SRAM]);
+	writel(0x00000001, &h32mx->sassr[H32MX_SLAVE_NFC_SRAM]);
+	writel(0x00000001, &h32mx->srtsr[H32MX_SLAVE_NFC_SRAM]);
 }
-- 
1.7.9.5



More information about the U-Boot mailing list