[U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard
Thomas Chou
thomas at wytron.com.tw
Tue Nov 10 13:37:36 CET 2015
Rename board nios2-generic to 3c120_devboard. Since nios2 is
converted to driver model and device tree control of u-boot,
the nios2-generic board directory is removed. We can rename
the board back to a real board name. Now the boards maintained
in u-boot mainline are the same as Linux kernel, namely 3c120
and 10m50.
Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
---
configs/3c120_defconfig | 27 ++++++++++
configs/nios2-generic_defconfig | 27 ----------
doc/README.nios2 | 8 +--
include/configs/3c120_devboard.h | 107 +++++++++++++++++++++++++++++++++++++++
include/configs/nios2-generic.h | 107 ---------------------------------------
5 files changed, 138 insertions(+), 138 deletions(-)
create mode 100644 configs/3c120_defconfig
delete mode 100644 configs/nios2-generic_defconfig
create mode 100644 include/configs/3c120_devboard.h
delete mode 100644 include/configs/nios2-generic.h
diff --git a/configs/3c120_defconfig b/configs/3c120_defconfig
new file mode 100644
index 0000000..736119e
--- /dev/null
+++ b/configs/3c120_defconfig
@@ -0,0 +1,27 @@
+CONFIG_NIOS2=y
+CONFIG_SYS_CONFIG_NAME="3c120_devboard"
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_ITEST is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_ALTERA_PIO=y
+CONFIG_MISC=y
+CONFIG_ALTERA_SYSID=y
+CONFIG_MTD=y
+CONFIG_CFI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_ALTERA_TSE=y
+CONFIG_ALTERA_JTAG_UART=y
+CONFIG_ALTERA_JTAG_UART_BYPASS=y
+CONFIG_TIMER=y
+CONFIG_ALTERA_TIMER=y
diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig
deleted file mode 100644
index 0a6de6f..0000000
--- a/configs/nios2-generic_defconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-CONFIG_NIOS2=y
-CONFIG_SYS_CONFIG_NAME="nios2-generic"
-CONFIG_DM_SERIAL=y
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_CPU=y
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_ITEST is not set
-CONFIG_CMD_DHCP=y
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_PING=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_ALTERA_PIO=y
-CONFIG_MISC=y
-CONFIG_ALTERA_SYSID=y
-CONFIG_MTD=y
-CONFIG_CFI_FLASH=y
-CONFIG_DM_ETH=y
-CONFIG_ALTERA_TSE=y
-CONFIG_ALTERA_JTAG_UART=y
-CONFIG_ALTERA_JTAG_UART_BYPASS=y
-CONFIG_TIMER=y
-CONFIG_ALTERA_TIMER=y
diff --git a/doc/README.nios2 b/doc/README.nios2
index 2dab7d1..a33c4e8 100644
--- a/doc/README.nios2
+++ b/doc/README.nios2
@@ -45,9 +45,9 @@ the sequence of these devices, like this,
};
Next, you will need a default config file. You may start with
-nios2-generic_defconfig, modify the options and save it.
+3c120_defconfig, modify the options and save it.
-$ make nios2-generic_defconfig
+$ make 3c120_defconfig
$ make menuconfig
$ make savedefconfig
$ cp defconfig configs/mysystem_defconfig
@@ -72,9 +72,9 @@ copies all the u-boot-dtb.bin, not just u-boot.bin.
binary. This is handy for development, eg, using gdb or nios2-download.
The last thing, legacy board header file describes those config options
-not covered in Kconfig yet. You may copy it from nios2-generic.h.
+not covered in Kconfig yet. You may copy it from 3c120_devboard.h.
-$ cp include/configs/nios2-generic.h include/configs/mysystem.h
+$ cp include/configs/3c120_devboard.h include/configs/mysystem.h
Please change the SDRAM base and size to match your board. The base
should be cached virtual address, for Nios II with MMU it is 0xCxxx_xxxx
diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h
new file mode 100644
index 0000000..856c836
--- /dev/null
+++ b/include/configs/3c120_devboard.h
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt at psyent.com>
+ * (C) Copyright 2010, Thomas Chou <thomas at wytron.com.tw>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * BOARD/CPU
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/*
+ * SERIAL
+ */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
+
+/*
+ * CFI Flash
+ */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
+#define CONFIG_SYS_MAX_FLASH_SECT 512
+
+/*
+ * NET options
+ */
+#define CONFIG_SYS_RX_ETH_BUFFER 0
+#define CONFIG_CMD_MII
+#define CONFIG_PHY_GIGE
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_PHY_MARVELL
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * FDT options
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_LMB
+
+/*
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+
+#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */
+#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
+#define CONFIG_ENV_ADDR 0xe2840000
+
+/*
+ * MEMORY ORGANIZATION
+ * -Monitor at top of sdram.
+ * -The heap is placed below the monitor
+ * -The stack is placed below the heap (&grows down).
+ */
+#define CONFIG_SYS_SDRAM_BASE 0xD0000000
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_SDRAM_SIZE - \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MALLOC_LEN 0x20000
+
+/*
+ * MISC
+ */
+#define CONFIG_SYS_LONGHELP /* Provide extended help */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
+#define CONFIG_SYS_MAXARGS 16 /* Max command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + \
+ 16) /* Print buf size */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
+ CONFIG_ENV_SIZE - \
+ CONFIG_SYS_MALLOC_LEN - \
+ 0x10000)
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_GPIO
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
deleted file mode 100644
index 856c836..0000000
--- a/include/configs/nios2-generic.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt at psyent.com>
- * (C) Copyright 2010, Thomas Chou <thomas at wytron.com.tw>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * BOARD/CPU
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-/*
- * SERIAL
- */
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
-
-/*
- * CFI Flash
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-/*
- * NET options
- */
-#define CONFIG_SYS_RX_ETH_BUFFER 0
-#define CONFIG_CMD_MII
-#define CONFIG_PHY_GIGE
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_PHY_MARVELL
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * FDT options
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_LMB
-
-/*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-#define CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */
-#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CONFIG_ENV_ADDR 0xe2840000
-
-/*
- * MEMORY ORGANIZATION
- * -Monitor at top of sdram.
- * -The heap is placed below the monitor
- * -The stack is placed below the heap (&grows down).
- */
-#define CONFIG_SYS_SDRAM_BASE 0xD0000000
-#define CONFIG_SYS_SDRAM_SIZE 0x08000000
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_SDRAM_SIZE - \
- CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MALLOC_LEN 0x20000
-
-/*
- * MISC
- */
-#define CONFIG_SYS_LONGHELP /* Provide extended help */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
-#define CONFIG_SYS_MAXARGS 16 /* Max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + \
- 16) /* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
- CONFIG_ENV_SIZE - \
- CONFIG_SYS_MALLOC_LEN - \
- 0x10000)
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_CMD_GPIO
-
-#endif /* __CONFIG_H */
--
2.5.0
More information about the U-Boot
mailing list