[U-Boot] [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect LS2080A
York Sun
yorksun at freescale.com
Tue Nov 10 20:10:11 CET 2015
On 11/09/2015 03:12 AM, Prabhakar Kushwaha wrote:
> LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
> personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
> So renaming existing LS2085A code base to reflect LS2080A (Prime personality)
>
> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava at freescale.com>
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> ---
> Changes for v2: Rebased on LS1043 patch set
>
> README | 3 +
> arch/arm/Kconfig | 44 +++++++----
> arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 +-
> arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 | 4 +-
> arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 2 +-
> arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +-
> .../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 11 +++
> .../{ls2085a_serdes.c => ls2080a_serdes.c} | 0
> arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 +-
> arch/arm/cpu/armv8/fsl-layerscape/spl.c | 4 +-
> arch/arm/dts/Makefile | 4 +-
> .../{fsl-ls2085a-qds.dts => fsl-ls2080a-qds.dts} | 8 +-
> .../{fsl-ls2085a-rdb.dts => fsl-ls2080a-rdb.dts} | 8 +-
> .../arm/dts/{fsl-ls2085a.dtsi => fsl-ls2080a.dtsi} | 4 +-
> arch/arm/include/asm/arch-fsl-layerscape/config.h | 4 +-
> arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 6 +-
> .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +-
> .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 6 +-
> .../{ls2085a_stream_id.h => ls2080a_stream_id.h} | 4 +-
> arch/arm/include/asm/global_data.h | 2 +-
> board/freescale/{ls2085a => ls2080a}/Kconfig | 12 +--
> board/freescale/ls2080a/MAINTAINERS | 8 ++
> board/freescale/ls2080a/Makefile | 8 ++
> board/freescale/{ls2085a => ls2080a}/README | 2 +-
> board/freescale/{ls2085a => ls2080a}/ddr.c | 3 +-
> board/freescale/{ls2085a => ls2080a}/ddr.h | 0
> .../{ls2085a/ls2085a.c => ls2080a/ls2080a.c} | 2 +
> board/freescale/{ls2085ardb => ls2080aqds}/Kconfig | 6 +-
> board/freescale/ls2080aqds/MAINTAINERS | 8 ++
> .../freescale/{ls2085aqds => ls2080aqds}/Makefile | 2 +-
> board/freescale/{ls2085aqds => ls2080aqds}/README | 16 ++--
> board/freescale/{ls2085ardb => ls2080aqds}/ddr.c | 5 +-
> board/freescale/{ls2085aqds => ls2080aqds}/ddr.h | 0
> board/freescale/{ls2085aqds => ls2080aqds}/eth.c | 92 +++++++++++-----------
> .../ls2085aqds.c => ls2080aqds/ls2080aqds.c} | 4 +-
> .../ls2080aqds_qixis.h} | 0
> board/freescale/{ls2085aqds => ls2080ardb}/Kconfig | 6 +-
> board/freescale/ls2080ardb/MAINTAINERS | 8 ++
> .../freescale/{ls2085ardb => ls2080ardb}/Makefile | 2 +-
> board/freescale/{ls2085ardb => ls2080ardb}/README | 12 +--
> board/freescale/{ls2085aqds => ls2080ardb}/ddr.c | 5 +-
> board/freescale/{ls2085ardb => ls2080ardb}/ddr.h | 0
> .../eth_ls2085rdb.c => ls2080ardb/eth_ls2080rdb.c} | 2 +-
> .../ls2085ardb.c => ls2080ardb/ls2080ardb.c} | 4 +-
> .../ls2080ardb_qixis.h} | 0
> board/freescale/ls2085a/MAINTAINERS | 8 --
> board/freescale/ls2085a/Makefile | 8 --
> board/freescale/ls2085aqds/MAINTAINERS | 8 --
> board/freescale/ls2085ardb/MAINTAINERS | 8 --
> ...ls2085a_emu_defconfig => ls2080a_emu_defconfig} | 2 +-
> ...2085a_simu_defconfig => ls2080a_simu_defconfig} | 2 +-
> .../{ls2085ardb_defconfig => ls2080aqds_defconfig} | 4 +-
> ...ds_nand_defconfig => ls2080aqds_nand_defconfig} | 2 +-
> .../{ls2085aqds_defconfig => ls2080ardb_defconfig} | 4 +-
> ...db_nand_defconfig => ls2080ardb_nand_defconfig} | 2 +-
> doc/README.fsl-trustzone-components | 4 +-
> drivers/ddr/fsl/fsl_ddr_gen4.c | 4 +-
> drivers/net/fsl-mc/mc.c | 5 +-
Prabhakar,
Are you sure you are using the correct code base? I don't even see function
do_fsl_mc().
York
More information about the U-Boot
mailing list