[U-Boot] [PATCH 15/17] eeprom: Add bus argument to eeprom_init()

[Marek Vasut]

Add bus argument to eeprom_init(), so that it can select
the I2C bus number on which the eeprom resides. Any negative
value of the $bus argument will preserve the old behavior.
This is in place so that old code does not randomly break.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Simon Glass <sjg at chromium.org>
Cc: Tom Rini <trini at konsulko.com>
Cc: Heiko Schocher <hs at denx.de>
---
 common/cmd_eeprom.c | 6 ++++--
 common/env_eeprom.c | 4 ++--
 include/common.h    | 2 +-
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index d0942ef..9247036 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -60,7 +60,7 @@ __weak int eeprom_write_enable(unsigned dev_addr, int state)
 	return 0;
 }
 
-void eeprom_init(void)
+void eeprom_init(int bus)
 {
 	/* SPI EEPROM */
 #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
@@ -69,6 +69,8 @@ void eeprom_init(void)
 
 	/* I2C EEPROM */
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
+	if (bus >= 0)
+		i2c_set_bus_num(bus);
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
 }
@@ -223,7 +225,7 @@ static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	off = simple_strtoul(*args++, NULL, 16);
 	cnt = simple_strtoul(*args++, NULL, 16);
 
-	eeprom_init();
+	eeprom_init(-1);
 
 	if (strcmp (argv[1], "read") == 0) {
 		printf(fmt, dev_addr, argv[1], addr, off, cnt);
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index eea169d..72b1373 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -91,7 +91,7 @@ void env_relocate_spec(void)
 	uchar rdbuf[64], flags[2];
 	int i, crc_ok[2] = {0, 0};
 
-	eeprom_init();	/* prepare for EEPROM read/write */
+	eeprom_init(-1);	/* prepare for EEPROM read/write */
 
 	off_env[0] = CONFIG_ENV_OFFSET;
 	off_env[1] = CONFIG_ENV_OFFSET_REDUND;
@@ -154,7 +154,7 @@ void env_relocate_spec(void)
 	ulong crc, len, new;
 	uchar rdbuf[64];
 
-	eeprom_init();	/* prepare for EEPROM read/write */
+	eeprom_init(-1);	/* prepare for EEPROM read/write */
 
 	/* read old CRC */
 	eeprom_bus_read(CONFIG_SYS_DEF_EEPROM_ADDR,
diff --git a/include/common.h b/include/common.h
index ceb1ad3..39ba5c9 100644
--- a/include/common.h
+++ b/include/common.h
@@ -475,7 +475,7 @@ void	reset_phy     (void);
 void	fdc_hw_init   (void);
 
 /* $(BOARD)/eeprom.c */
-void eeprom_init  (void);
+void eeprom_init  (int bus);
 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 
-- 
2.1.4