[U-Boot] aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[]
Albert ARIBAUD
albert.u.boot at aribaud.net
Thu Nov 12 08:20:18 CET 2015
Hello Shawn,
On Thu, 12 Nov 2015 13:43:18 +0800, Shawn Guo <shawn.guo at linaro.org>
wrote:
> Hi,
>
> I need some help to understand aarch64-linux-gnu-objdump output in .data
> section as below. It's part of the dump of u-boot image with command
> 'aarch64-linux-gnu-objdump -D -z u-boot'.
>
> Disassembly of section .data:
>
> 0000000035039898 <reserved_list>:
> <snip>
>
> 0000000035039948 <init_sequence_f>:
> 35039948: 00000000 .word 0x00000000
> 3503994c: 00000000 .word 0x00000000
> 35039950: 00000000 .word 0x00000000
> 35039954: 00000000 .word 0x00000000
> 35039958: 00000000 .word 0x00000000
> 3503995c: 00000000 .word 0x00000000
> 35039960: 00000000 .word 0x00000000
> 35039964: 00000000 .word 0x00000000
> 35039968: 00000000 .word 0x00000000
> 3503996c: 00000000 .word 0x00000000
> 35039970: 00000000 .word 0x00000000
> 35039974: 00000000 .word 0x00000000
> 35039978: 00000000 .word 0x00000000
> 3503997c: 00000000 .word 0x00000000
> 35039980: 00000000 .word 0x00000000
> 35039984: 00000000 .word 0x00000000
> 35039988: 00000000 .word 0x00000000
> 3503998c: 00000000 .word 0x00000000
> 35039990: 00000000 .word 0x00000000
> 35039994: 00000000 .word 0x00000000
> 35039998: 00000000 .word 0x00000000
> 3503999c: 00000000 .word 0x00000000
> 350399a0: 00000000 .word 0x00000000
> 350399a4: 00000000 .word 0x00000000
> 350399a8: 00000000 .word 0x00000000
> 350399ac: 00000000 .word 0x00000000
> 350399b0: 00000000 .word 0x00000000
> 350399b4: 00000000 .word 0x00000000
> 350399b8: 00000000 .word 0x00000000
> 350399bc: 00000000 .word 0x00000000
> 350399c0: 00000000 .word 0x00000000
> 350399c4: 00000000 .word 0x00000000
> 350399c8: 00000000 .word 0x00000000
> 350399cc: 00000000 .word 0x00000000
> 350399d0: 00000000 .word 0x00000000
> 350399d4: 00000000 .word 0x00000000
> 350399d8: 00000000 .word 0x00000000
> 350399dc: 00000000 .word 0x00000000
> 350399e0: 00000000 .word 0x00000000
> 350399e4: 00000000 .word 0x00000000
> 350399e8: 00000000 .word 0x00000000
> 350399ec: 00000000 .word 0x00000000
> 350399f0: 00000000 .word 0x00000000
> 350399f4: 00000000 .word 0x00000000
> 350399f8: 00000000 .word 0x00000000
> 350399fc: 00000000 .word 0x00000000
> 35039a00: 00000000 .word 0x00000000
> 35039a04: 00000000 .word 0x00000000
> 35039a08: 00000000 .word 0x00000000
> 35039a0c: 00000000 .word 0x00000000
> 35039a10: 00000000 .word 0x00000000
> 35039a14: 00000000 .word 0x00000000
> 35039a18: 00000000 .word 0x00000000
> 35039a1c: 00000000 .word 0x00000000
> 35039a20: 00000000 .word 0x00000000
> 35039a24: 00000000 .word 0x00000000
> 35039a28: 00000000 .word 0x00000000
> 35039a2c: 00000000 .word 0x00000000
> 35039a30: 00000000 .word 0x00000000
> 35039a34: 00000000 .word 0x00000000
> 35039a38: 00000000 .word 0x00000000
> 35039a3c: 00000000 .word 0x00000000
> 35039a40: 00000000 .word 0x00000000
> 35039a44: 00000000 .word 0x00000000
> 35039a48: 00000000 .word 0x00000000
> 35039a4c: 00000000 .word 0x00000000
>
> The init_sequence_f[] is an array defined in U-Boot v2015.04 source
> common/board_f.c, which holds a bunch of pointers to critical
> initialization functions that have to be called during boot. Obviously,
> the array cannot be all zeros like what objdump tells. And I confirmed
> that by printing the pointers at run-time as below.
>
> init_sequence_f[0]: 0000000035004280
> init_sequence_f[1]: 00000000350042a8
> init_sequence_f[2]: 0000000035004380
> init_sequence_f[3]: 00000000350042a0
> init_sequence_f[4]: 00000000350044b8
> init_sequence_f[5]: 0000000035004388
> init_sequence_f[6]: 0000000035029538
> init_sequence_f[7]: 000000003500675c
> init_sequence_f[8]: 000000003500447c
> init_sequence_f[9]: 000000003501d864
> init_sequence_f[10]: 0000000035013778
> init_sequence_f[11]: 0000000035004398
> init_sequence_f[12]: 0000000035028ab8
> init_sequence_f[13]: 0000000035004278
> init_sequence_f[14]: 0000000035004270
> init_sequence_f[15]: 000000003500445c
> init_sequence_f[16]: 0000000035001f20
> init_sequence_f[17]: 0000000035004574
> init_sequence_f[18]: 00000000350042b0
> init_sequence_f[19]: 00000000350042c4
> init_sequence_f[20]: 00000000350042cc
> init_sequence_f[21]: 00000000350042f8
> init_sequence_f[22]: 00000000350044d4
> init_sequence_f[23]: 000000003500430c
> init_sequence_f[24]: 0000000035004314
> init_sequence_f[25]: 0000000035004330
> init_sequence_f[26]: 0000000035004390
> init_sequence_f[27]: 00000000350045bc
> init_sequence_f[28]: 0000000035004550
> init_sequence_f[29]: 0000000035004518
> init_sequence_f[30]: 0000000035004378
> init_sequence_f[31]: 0000000035004428
> init_sequence_f[32]: 00000000350043f0
>
> Dumping an u-boot image built for 32-bit platform with
> arm-linux-gnueabi-objdump gives correct pointer values for the same
> array.
>
> 17853c7c <init_sequence_f>:
> 17853c7c: 17805600 strne r5, [r0, r0, lsl #12]
> 17853c80: 17805620 strne r5, [r0, r0, lsr #12]
> 17853c84: 1780574c strne r5, [r0, ip, asr #14]
> 17853c88: 178007ec strne r0, [r0, ip, ror #15]
> 17853c8c: 1780583c ; <UNDEFINED> instruction: 0x1780583c
> 17853c90: 17805834 ; <UNDEFINED> instruction: 0x17805834
> 17853c94: 1780315c ; <UNDEFINED> instruction: 0x1780315c
> 17853c98: 178015f4 ; <UNDEFINED> instruction: 0x178015f4
> 17853c9c: 17800890 ; <UNDEFINED> instruction: 0x17800890
> 17853ca0: 17801c0c strne r1, [r0, ip, lsl #24]
> 17853ca4: 178078f8 ; <UNDEFINED> instruction: 0x178078f8
> 17853ca8: 17805808 strne r5, [r0, r8, lsl #16]
> 17853cac: 17829564 strne r9, [r2, r4, ror #10]
> 17853cb0: 17816104 strne r6, [r1, r4, lsl #2]
> 17853cb4: 1783dea4 strne sp, [r3, r4, lsr #29]
> 17853cb8: 178055f8 ; <UNDEFINED> instruction: 0x178055f8
> 17853cbc: 17801a54 ; <UNDEFINED> instruction: 0x17801a54
> 17853cc0: 17805b4c strne r5, [r0, ip, asr #22]
> 17853cc4: 178057e0 strne r5, [r0, r0, ror #15]
> 17853cc8: 178057c8 strne r5, [r0, r8, asr #15]
> 17853ccc: 17802e20 strne r2, [r0, r0, lsr #28]
> 17853cd0: 17805910 usada8ne r0, r0, r9, r5
> 17853cd4: 17805628 strne r5, [r0, r8, lsr #12]
> 17853cd8: 17805640 strne r5, [r0, r0, asr #12]
> 17853cdc: 17805678 ; <UNDEFINED> instruction: 0x17805678
> 17853ce0: 17805680 strne r5, [r0, r0, lsl #13]
> 17853ce4: 178056b0 ; <UNDEFINED> instruction: 0x178056b0
> 17853ce8: 17805850 ; <UNDEFINED> instruction: 0x17805850
> 17853cec: 178056c8 strne r5, [r0, r8, asr #13]
> 17853cf0: 178056dc ; <UNDEFINED> instruction: 0x178056dc
> 17853cf4: 178056f8 ; <UNDEFINED> instruction: 0x178056f8
> 17853cf8: 17805768 strne r5, [r0, r8, ror #14]
> 17853cfc: 17805950 ; <UNDEFINED> instruction: 0x17805950
> 17853d00: 178058ec strne r5, [r0, ip, ror #17]
> 17853d04: 17805894 ; <UNDEFINED> instruction: 0x17805894
> 17853d08: 17805744 strne r5, [r0, r4, asr #14]
> 17853d0c: 17805798 ; <UNDEFINED> instruction: 0x17805798
> 17853d10: 17805770 ; <UNDEFINED> instruction: 0x17805770
> 17853d14: 00000000 andeq r0, r0, r0
>
> Here are my questions:
>
> - Is this only because that ARM 64-bit toolchain doesn't show the real
> value of the pointers, or there are some linking or run-time magics to
> get these pointers correct when the binary is actually running?
>
> - Is this different behavior between ARM 32-bit and 64-bit toolchain
> expected? Or did I miss anything on 64-bit toolchain usage?
>
> Any hints or comments are much appreciated.
Can you provide the target name and commit ID that you are building,
s well as the version of the toolchain that you are building with?
Without being able to reproduce your issue, it's kind of hard to
diagnose it.
> Thanks,
> Shawn
Amicalement,
--
Albert.
More information about the U-Boot
mailing list