[U-Boot] [PATCH v4 05/21] sf: Make flash->flags use for generic usage
Bin Meng
bmeng.cn at gmail.com
Mon Nov 16 03:59:28 CET 2015
Hi Jagan,
On Mon, Oct 12, 2015 at 11:00 PM, Jagan Teki <jteki at openedev.com> wrote:
> Use the flash->flags for generic usage, not only for dm-spi-flash,
> this will be used for future flag additions.
>
> Signed-off-by: Jagan Teki <jteki at openedev.com>
> [Correct the spi flash flags detect logic]
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> Tested-by: Bin Meng <bmeng.cn at gmail.com>
> ---
> Changes for v4:
> - Fixed SNOR_F_SST_WR
> Changes for v3, v2:
> - none
>
It turns out this patch breaks the Intel Crown Bay SPI flash. I
compared my original submitted patch with this patch you applied, and
surprisingly found there are differences ...
My version is http://patchwork.ozlabs.org/patch/517704/
You version below seems to modify some places which you thought would
be correct, but that's unfortunately wrong. If you reworked my patch,
I think you should remove at least my "Tested-by:" tag and ask me to
retest.
Can you please help me understand what happened? I expected that you
should just grab my version and include it in your patch series.
> drivers/mtd/spi/sf_internal.h | 4 ++++
> drivers/mtd/spi/sf_probe.c | 10 +++++-----
> include/spi_flash.h | 4 ++--
> 3 files changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
> index 9c95d56..53998fc 100644
> --- a/drivers/mtd/spi/sf_internal.h
> +++ b/drivers/mtd/spi/sf_internal.h
> @@ -51,6 +51,10 @@ enum {
>
> #define SST_WR (SST_BP | SST_WP)
>
> +enum spi_nor_option_flags {
> + SNOR_F_SST_WR = (1 << 0),
> +};
> +
> #define SPI_FLASH_3B_ADDR_LEN 3
> #define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
> #define SPI_FLASH_16MB_BOUN 0x1000000
> diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
> index f17ec17..2634e90 100644
> --- a/drivers/mtd/spi/sf_probe.c
> +++ b/drivers/mtd/spi/sf_probe.c
> @@ -163,15 +163,15 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
> flash->name = params->name;
> flash->memory_map = spi->memory_map;
> flash->dual_flash = flash->spi->option;
> -#ifdef CONFIG_DM_SPI_FLASH
> - flash->flags = params->flags;
> -#endif
>
> /* Assign spi_flash ops */
> #ifndef CONFIG_DM_SPI_FLASH
> flash->write = spi_flash_cmd_write_ops;
> #if defined(CONFIG_SPI_FLASH_SST)
> - if (params->flags & SST_WR) {
> + if (params->flags & SST_WR)
> + flash->flags |= SNOR_F_SST_WR;
> +
> + if (params->flags & SNOR_F_SST_WR) {
> if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
> flash->write = sst_write_bp;
> else
> @@ -466,7 +466,7 @@ int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len,
> struct spi_flash *flash = dev_get_uclass_priv(dev);
>
> #if defined(CONFIG_SPI_FLASH_SST)
> - if (flash->flags & SST_WR) {
> + if (flash->flags & SNOR_F_SST_WR) {
> if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
> return sst_write_bp(flash, offset, len, buf);
> else
> diff --git a/include/spi_flash.h b/include/spi_flash.h
> index 3b2d555..8d85468 100644
> --- a/include/spi_flash.h
> +++ b/include/spi_flash.h
> @@ -38,10 +38,10 @@ struct spi_slave;
> *
> * @spi: SPI slave
> * @dev: SPI flash device
> - * @flags: Indication of spi flash flags
> * @name: Name of SPI flash
> * @dual_flash: Indicates dual flash memories - dual stacked, parallel
> * @shift: Flash shift useful in dual parallel
> + * @flags: Indication of spi flash flags
> * @size: Total flash size
> * @page_size: Write (page) size
> * @sector_size: Sector size
> @@ -67,11 +67,11 @@ struct spi_flash {
> struct spi_slave *spi;
> #ifdef CONFIG_DM_SPI_FLASH
> struct udevice *dev;
> - u16 flags;
> #endif
> const char *name;
> u8 dual_flash;
> u8 shift;
> + u16 flags;
>
> u32 size;
> u32 page_size;
> --
Regards,
Bin
More information about the U-Boot
mailing list