[U-Boot] [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect LS2080A

[York Sun]

I realized this set depends on another set. Thanks.

York


Sent on a Sprint Samsung Galaxy Note® II


-------- Original message --------
From: Kushwaha Prabhakar-B32579
Date:11/15/2015 8:35 PM (GMT-08:00)
To: Sun York-R58495 , u-boot at lists.denx.de
Cc: Srivastava Pratiyush-B46174
Subject: RE: [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect LS2080A

Hi York,

This patch set in top of my previous patches. I did to make sure it can be applied cleanly.

  armv8: lsch3: Fix lane protocol parsing logic
  driver: net: fsl-mc: Add create, destroy APIs in flibs
  driver: net: fsl-mc: Add APIs for DPMAC objects in FLIB
  armv8: ls2085aqds: Print function name during SerDes error
  driver: ldpaa: Add api to return linked PHY ID of DPMAC
  driver: net: fsl-mc: Increase MC command timeout
  driver: net: fsl-mc: Add DPAA2 commands to manage MC
  driver: net: fsl-mc: Create DPAA2 object at run-time
  driver: net: ldpaa: Use DPMAC as net device
  driver: net: ldpaa: Add debug information

 armv8: ls2085a: Add workaround of errata A009635
 driver: net: ldpaa: Fix Rx buffer alignment


Regards,
Prabhakar

> -----Original Message-----
> From: York Sun [mailto:yorksun at freescale.com]
> Sent: Wednesday, November 11, 2015 12:40 AM
> To: Kushwaha Prabhakar-B32579 <prabhakar at freescale.com>; u-
> boot at lists.denx.de
> Cc: Srivastava Pratiyush-B46174 <pratiyush.srivastava at freescale.com>
> Subject: Re: [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect
> LS2080A
>
>
>
> On 11/09/2015 03:12 AM, Prabhakar Kushwaha wrote:
> > LS2080A is a prime personality of Freescale’s LS2085A. It is a
> > non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe
> endpoint etc.
> > So renaming existing LS2085A code base to reflect LS2080A (Prime
> > personality)
> >
> > Signed-off-by: Pratiyush Mohan Srivastava
> > <pratiyush.srivastava at freescale.com>
> > Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> > ---
> > Changes for v2: Rebased on LS1043 patch set
> >
> >  README                                             |  3 +
> >  arch/arm/Kconfig                                   | 44 +++++++----
> >  arch/arm/cpu/armv8/fsl-layerscape/Makefile         |  4 +-
> >  arch/arm/cpu/armv8/fsl-layerscape/README.lsch3     |  4 +-
> >  arch/arm/cpu/armv8/fsl-layerscape/cpu.c            |  2 +-
> >  arch/arm/cpu/armv8/fsl-layerscape/fdt.c            |  2 +-
> >  .../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 11 +++
> >  .../{ls2085a_serdes.c => ls2080a_serdes.c}         |  0
> >  arch/arm/cpu/armv8/fsl-layerscape/soc.c            |  2 +-
> >  arch/arm/cpu/armv8/fsl-layerscape/spl.c            |  4 +-
> >  arch/arm/dts/Makefile                              |  4 +-
> >  .../{fsl-ls2085a-qds.dts => fsl-ls2080a-qds.dts}   |  8 +-
> >  .../{fsl-ls2085a-rdb.dts => fsl-ls2080a-rdb.dts}   |  8 +-
> >  .../arm/dts/{fsl-ls2085a.dtsi => fsl-ls2080a.dtsi} |  4 +-
> > arch/arm/include/asm/arch-fsl-layerscape/config.h  |  4 +-
> >  arch/arm/include/asm/arch-fsl-layerscape/cpu.h     |  6 +-
> >  .../include/asm/arch-fsl-layerscape/fsl_serdes.h   |  2 +-
> >  .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |  6 +-
> >  .../{ls2085a_stream_id.h => ls2080a_stream_id.h}   |  4 +-
> >  arch/arm/include/asm/global_data.h                 |  2 +-
> >  board/freescale/{ls2085a => ls2080a}/Kconfig       | 12 +--
> >  board/freescale/ls2080a/MAINTAINERS                |  8 ++
> >  board/freescale/ls2080a/Makefile                   |  8 ++
> >  board/freescale/{ls2085a => ls2080a}/README        |  2 +-
> >  board/freescale/{ls2085a => ls2080a}/ddr.c         |  3 +-
> >  board/freescale/{ls2085a => ls2080a}/ddr.h         |  0
> >  .../{ls2085a/ls2085a.c => ls2080a/ls2080a.c}       |  2 +
> >  board/freescale/{ls2085ardb => ls2080aqds}/Kconfig |  6 +-
> >  board/freescale/ls2080aqds/MAINTAINERS             |  8 ++
> >  .../freescale/{ls2085aqds => ls2080aqds}/Makefile  |  2 +-
> > board/freescale/{ls2085aqds => ls2080aqds}/README  | 16 ++--
> >  board/freescale/{ls2085ardb => ls2080aqds}/ddr.c   |  5 +-
> >  board/freescale/{ls2085aqds => ls2080aqds}/ddr.h   |  0
> >  board/freescale/{ls2085aqds => ls2080aqds}/eth.c   | 92 +++++++++++-----
> ------
> >  .../ls2085aqds.c => ls2080aqds/ls2080aqds.c}       |  4 +-
> >  .../ls2080aqds_qixis.h}                            |  0
> >  board/freescale/{ls2085aqds => ls2080ardb}/Kconfig |  6 +-
> >  board/freescale/ls2080ardb/MAINTAINERS             |  8 ++
> >  .../freescale/{ls2085ardb => ls2080ardb}/Makefile  |  2 +-
> > board/freescale/{ls2085ardb => ls2080ardb}/README  | 12 +--
> >  board/freescale/{ls2085aqds => ls2080ardb}/ddr.c   |  5 +-
> >  board/freescale/{ls2085ardb => ls2080ardb}/ddr.h   |  0
> >  .../eth_ls2085rdb.c => ls2080ardb/eth_ls2080rdb.c} |  2 +-
> >  .../ls2085ardb.c => ls2080ardb/ls2080ardb.c}       |  4 +-
> >  .../ls2080ardb_qixis.h}                            |  0
> >  board/freescale/ls2085a/MAINTAINERS                |  8 --
> >  board/freescale/ls2085a/Makefile                   |  8 --
> >  board/freescale/ls2085aqds/MAINTAINERS             |  8 --
> >  board/freescale/ls2085ardb/MAINTAINERS             |  8 --
> >  ...ls2085a_emu_defconfig => ls2080a_emu_defconfig} |  2 +-
> > ...2085a_simu_defconfig => ls2080a_simu_defconfig} |  2 +-
> > .../{ls2085ardb_defconfig => ls2080aqds_defconfig} |  4 +-
> > ...ds_nand_defconfig => ls2080aqds_nand_defconfig} |  2 +-
> > .../{ls2085aqds_defconfig => ls2080ardb_defconfig} |  4 +-
> > ...db_nand_defconfig => ls2080ardb_nand_defconfig} |  2 +-
> >  doc/README.fsl-trustzone-components                |  4 +-
> >  drivers/ddr/fsl/fsl_ddr_gen4.c                     |  4 +-
> >  drivers/net/fsl-mc/mc.c                            |  5 +-
>
> Prabhakar,
>
> Are you sure you are using the correct code base? I don't even see function
> do_fsl_mc().
>
> York
>