[U-Boot] [PATCH v5] Fix board init code to respect the C runtime environment
Simon Glass
sjg at chromium.org
Tue Nov 17 05:11:38 CET 2015
Hi Albert,
On 16 November 2015 at 09:22, Albert ARIBAUD <albert.u.boot at aribaud.net> wrote:
>
> board_init_f_mem() alters the C runtime environment's
> stack it is actually already using. This is not a valid
> behaviour within a C runtime environment.
>
> Split board_init_f_mem into C functions which do not alter
> their own stack and always behave properly with respect to
> their C runtime environment.
>
> Signed-off-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
> ---
> Cc:ing custodians for all architectures which this
> patch affects.
>
> This patch has been build-tested for all there
> architectures, and run-tested on ARM OpenRD Client.
>
> For NIOS2, this patch contains all manual v1 and v2
> fixes by Thomas.
>
> For x86, this patch contains all manual v2 fixes by Bin.
>
> Changes in v5:
> - Reword commit message (including summary/subject)
> - Reword comments in ARC code
>
> Changes in v4:
> - Add comments on reserving GD at the lowest location
> - Add comments on post-incrementing base for each "chunk"
>
> Changes in v3:
> - Rebase after commit 9ac4fc82
> - Simplify malloc conditional as per commit 9ac4fc82
> - Fix NIOS2 return value register (r2, not r4)
> - Fix x86 subl argument inversion
> - Group allocations in a single function
> - Group initializations in a single function
>
> Changes in v2:
> - Fix all checkpatch issues
> - Fix board_init_f_malloc prototype mismatch
> - Fix board_init_[f_]xxx typo in NIOS2
> - Fix aarch64 asm 'sub' syntax error
>
> arch/arc/lib/start.S | 16 +++---
> arch/arm/lib/crt0.S | 6 ++-
> arch/arm/lib/crt0_64.S | 6 ++-
> arch/microblaze/cpu/start.S | 4 +-
> arch/nios2/cpu/start.S | 13 +++--
> arch/powerpc/cpu/ppc4xx/start.S | 10 ++--
> arch/x86/cpu/start.S | 5 +-
> arch/x86/lib/fsp/fsp_common.c | 4 +-
> common/init/board_init.c | 108 +++++++++++++++++++++++++++++++++++-----
> include/common.h | 33 +++++-------
> 10 files changed, 146 insertions(+), 59 deletions(-)
>
> diff --git a/arch/arc/lib/start.S b/arch/arc/lib/start.S
> index 26a5934..fddd536 100644
> --- a/arch/arc/lib/start.S
> +++ b/arch/arc/lib/start.S
> @@ -50,18 +50,20 @@ ENTRY(_start)
> 1:
> #endif
>
> - /* Setup stack- and frame-pointers */
> + /* Establish C runtime stack and frame */
> mov %sp, CONFIG_SYS_INIT_SP_ADDR
> mov %fp, %sp
>
> - /* Allocate and zero GD, update SP */
> - mov %r0, %sp
> - bl board_init_f_mem
> -
> - /* Update stack- and frame-pointers */
> - mov %sp, %r0
> + /* Get reserved area size */
> + bl board_init_f_get_reserve_size
> + /* Allocate reserved size on stack, adjust frame pointer accordingly */
> + sub %sp, %sp, %r0
> mov %fp, %sp
>
> + /* Initialize reserved area */
> + mov %r0, %sp
> + bl board_init_f_init_reserve
> +
> /* Zero the one and only argument of "board_init_f" */
> mov_s %r0, 0
> j board_init_f
> diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
> index 80548eb..4ec89a4 100644
> --- a/arch/arm/lib/crt0.S
> +++ b/arch/arm/lib/crt0.S
> @@ -82,9 +82,11 @@ ENTRY(_main)
> #else
> bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
> #endif
> + bl board_init_f_get_reserve_size
> + sub sp, sp, r0
> + mov r9, sp
Why do you need that?
> mov r0, sp
> - bl board_init_f_mem
> - mov sp, r0
> + bl board_init_f_init_reserve
>
> mov r0, #0
> bl board_init_f
> diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
> index cef1c71..2891071 100644
> --- a/arch/arm/lib/crt0_64.S
> +++ b/arch/arm/lib/crt0_64.S
> @@ -75,8 +75,10 @@ ENTRY(_main)
> ldr x0, =(CONFIG_SYS_INIT_SP_ADDR)
> #endif
> bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
> - bl board_init_f_mem
> - mov sp, x0
> + bl board_init_f_get_reserve_size
> + sub sp, sp, x0
> + mov x0, sp
> + bl board_init_f_init_reserve
>
> mov x0, #0
> bl board_init_f
> diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
> index 14f46a8..206be3e 100644
> --- a/arch/microblaze/cpu/start.S
> +++ b/arch/microblaze/cpu/start.S
> @@ -25,7 +25,7 @@ _start:
>
> addi r8, r0, __end
> mts rslr, r8
> - /* TODO: Redo this code to call board_init_f_mem() */
> + /* TODO: Redo this code to call board_init_f_*() */
> #if defined(CONFIG_SPL_BUILD)
> addi r1, r0, CONFIG_SPL_STACK_ADDR
> mts rshr, r1
> @@ -142,7 +142,7 @@ _start:
> ori r12, r12, 0x1a0
> mts rmsr, r12
>
> - /* TODO: Redo this code to call board_init_f_mem() */
> + /* TODO: Redo this code to call board_init_f_*() */
> clear_bss:
> /* clear BSS segments */
> addi r5, r0, __bss_start
> diff --git a/arch/nios2/cpu/start.S b/arch/nios2/cpu/start.S
> index 54787c5..45bf0fd 100644
> --- a/arch/nios2/cpu/start.S
> +++ b/arch/nios2/cpu/start.S
> @@ -106,14 +106,17 @@ _reloc:
> stw r0, 4(sp)
> mov fp, sp
>
> - /* Allocate and zero GD, update SP */
> + /* Allocate and initialize reserved area, update SP */
> + movhi r2, %hi(board_init_f_get_reserve_size at h)
> + ori r2, r2, %lo(board_init_f_get_reserve_size at h)
> + callr r2
> + sub sp, sp, r2
> mov r4, sp
> - movhi r2, %hi(board_init_f_mem at h)
> - ori r2, r2, %lo(board_init_f_mem at h)
> + movhi r2, %hi(board_init_f_init_reserve at h)
> + ori r2, r2, %lo(board_init_f_init_reserve at h)
> callr r2
>
> - /* Update stack- and frame-pointers */
> - mov sp, r2
> + /* Update frame-pointer */
> mov fp, sp
>
> /* Call board_init_f -- never returns */
> diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
> index 77d4040..44222d2 100644
> --- a/arch/powerpc/cpu/ppc4xx/start.S
> +++ b/arch/powerpc/cpu/ppc4xx/start.S
> @@ -761,9 +761,10 @@ _start:
>
> bl cpu_init_f /* run low-level CPU init code (from Flash) */
> #ifdef CONFIG_SYS_GENERIC_BOARD
> + bl board_init_f_get_reserve_size
> + sub r1, r1, r3
> mr r3, r1
> - bl board_init_f_mem
> - mr r1, r3
> + bl board_init_f_init_reserve
> li r0,0
> stwu r0, -4(r1)
> stwu r0, -4(r1)
> @@ -1037,9 +1038,10 @@ _start:
>
> bl cpu_init_f /* run low-level CPU init code (from Flash) */
> #ifdef CONFIG_SYS_GENERIC_BOARD
> + bl board_init_f_get_reserve_size
> + sub r1, r1, r3
> mr r3, r1
> - bl board_init_f_mem
> - mr r1, r3
> + bl board_init_f_init_reserve
> stwu r0, -4(r1)
> stwu r0, -4(r1)
> #endif
> diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
> index 5b4ee79..932672c 100644
> --- a/arch/x86/cpu/start.S
> +++ b/arch/x86/cpu/start.S
> @@ -122,9 +122,10 @@ car_init_ret:
> */
> #endif
> /* Set up global data */
> + call board_init_f_get_reserve_size
> + subl %eax, %esp
> mov %esp, %eax
> - call board_init_f_mem
> - mov %eax, %esp
> + call board_init_f_init_reserve
>
> #ifdef CONFIG_DEBUG_UART
> call debug_uart_init
> diff --git a/arch/x86/lib/fsp/fsp_common.c b/arch/x86/lib/fsp/fsp_common.c
> index c78df94..72c458f 100644
> --- a/arch/x86/lib/fsp/fsp_common.c
> +++ b/arch/x86/lib/fsp/fsp_common.c
> @@ -95,8 +95,8 @@ int x86_fsp_init(void)
> /*
> * The second time we enter here, adjust the size of malloc()
> * pool before relocation. Given gd->malloc_base was adjusted
> - * after the call to board_init_f_mem() in arch/x86/cpu/start.S,
> - * we should fix up gd->malloc_limit here.
> + * after the call to board_init_f_init_reserve() in arch/x86/
> + * cpu/start.S, we should fix up gd->malloc_limit here.
> */
> gd->malloc_limit += CONFIG_FSP_SYS_MALLOC_F_LEN;
> }
> diff --git a/common/init/board_init.c b/common/init/board_init.c
> index 1c6126d..db4d9a0 100644
> --- a/common/init/board_init.c
> +++ b/common/init/board_init.c
> @@ -21,39 +21,121 @@ DECLARE_GLOBAL_DATA_PTR;
> #define _USE_MEMCPY
> #endif
>
> -/* Unfortunately x86 can't compile this code as gd cannot be assigned */
> -#ifndef CONFIG_X86
> +/* Unfortunately x86 or ARM can't compile this code as gd cannot be assigned */
> +#if !defined(CONFIG_X86) && !defined(CONFIG_ARM)
> __weak void arch_setup_gd(struct global_data *gd_ptr)
> {
> gd = gd_ptr;
> }
> -#endif /* !CONFIG_X86 */
> +#endif /* !CONFIG_X86 && !CONFIG_SYS_THUMB_BUILD */
>
> -ulong board_init_f_mem(ulong top)
> +/*
> + * Compute size of space to reserve on stack for use as 'globals'
> + * and return size request for reserved area.
> + *
> + * Notes:
> + *
> + * Actual reservation cannot be done from within this function as
> + * it requires altering the C stack pointer, so this will be done by
> + * the caller upon return from this function.
> + *
> + * IMPORTANT:
> + *
> + * The return value of this function has two uses:
> + * - it determines the amount of stack reserved for global data and
> + * the malloc arena;
early malloc() area
> + * - it determines where the global data will be located, as on some
> + * architectures the caller will set gd to the base of the reserved
> + * location.
> + *
> + */
> +
> +ulong board_init_f_get_reserve_size(void)
Another option would be to pass the address and have this function
return the new address. That would simplify the assembly code slightly
for all archs I think. It would also allow you to align the address
for sure, whereas at present it only works if the original address was
aligned, and CONFIG_SYS_MALLOC_F_LEN is aligned.
> +{
> + ulong size;
> +
> + /* Reserve GD (rounded up to a multiple of 16 bytes) */
> + size = roundup(sizeof(struct global_data), 16);
> +
> + /* Reserve malloc arena */
early malloc() area
> +#if defined(CONFIG_SYS_MALLOC_F)
> + size += CONFIG_SYS_MALLOC_F_LEN;
> +#endif
> +
> + return size;
> +}
> +
> +/*
> + * Initialize reserved space (which has been safely allocated on the C
> + * stack from the C runtime environment handling code).
> + *
> + * Notes:
> + *
> + * Actual reservation was done by the caller; the locations from base
> + * to base+size-1 (where 'size' is the value returned by the allocation
> + * function above) can be accessed freely without risk of corrupting the
> + * C runtime environment.
> + *
> + * IMPORTANT:
> + *
> + * Upon return from the allocation function above, on some architectures
> + * the caller will set gd to the lowest reserved location. Therefore, in
> + * this initialization function, the global data MUST be placed at base.
> + *
> + * ALSO IMPORTANT:
> + *
> + * On some architectures, gd will only be set once arch_setup_gd() is
> + * called. Therefore:
> + *
> + * Do not use 'gd->' until arch_setup_gd() has been called!
> + *
> + * IMPORTANT TOO:
> + *
> + * Initialization for each "chunk" (GD, malloc arena...) ends with an
early malloc() area
> + * incrementation line of the form 'base += <some size>'. The last of
> + * these incrementations seems useless, as base will not be used any
> + * more after this incrementation; but if/when a new "chunk" is appended,
> + * this increment will be essential as it will give base right value for
> + * this new chunk (which will have to end with its own incrementation
> + * statement). Besides, the compiler's optimizer will silently detect
> + * and remove the last base incrementation, therefore leaving that last
> + * (seemingly useless) incrementation causes no code increase.
> + */
> +
> +void board_init_f_init_reserve(ulong base)
> {
> struct global_data *gd_ptr;
> #ifndef _USE_MEMCPY
> int *ptr;
> #endif
>
> - /* Leave space for the stack we are running with now */
> - top -= 0x40;
> + /*
> + * clear GD entirely and set it up
> + */
>
> - top -= sizeof(struct global_data);
> - top = ALIGN(top, 16);
> - gd_ptr = (struct global_data *)top;
> + gd_ptr = (struct global_data *)base;
> + /* zero the area */
> #ifdef _USE_MEMCPY
> memset(gd_ptr, '\0', sizeof(*gd));
> #else
> for (ptr = (int *)gd_ptr; ptr < (int *)(gd_ptr + 1); )
> *ptr++ = 0;
> #endif
> + /* set GD unless architecture did it already */
> +#if !defined(CONFIG_X86) && !defined(CONFIG_ARM)
> arch_setup_gd(gd_ptr);
Why does this not work for ARM?
> +#endif
> + /* next alloc will be higher by one GD plus 16-byte alignment */
> + base += roundup(sizeof(struct global_data), 16);
> +
> + /*
> + * record malloc arena start
> + */
>
> #if defined(CONFIG_SYS_MALLOC_F)
> - top -= CONFIG_SYS_MALLOC_F_LEN;
> - gd->malloc_base = top;
> + /* go down one malloc arena */
> + gd->malloc_base = base;
gd_ptr?
> + /* next alloc will be higher by one malloc arena size */
> + base += CONFIG_SYS_MALLOC_F_LEN;
> #endif
> -
> - return top;
> }
> diff --git a/include/common.h b/include/common.h
> index 09a131d..988d67a 100644
> --- a/include/common.h
> +++ b/include/common.h
> @@ -225,32 +225,25 @@ void board_init_f(ulong);
> void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
>
> /**
> - * board_init_f_mem() - Allocate global data and set stack position
> + * ulong board_init_f_get_reserve_size - return size of reserved area
> *
> * This function is called by each architecture very early in the start-up
> - * code to set up the environment for board_init_f(). It allocates space for
> - * global_data (see include/asm-generic/global_data.h) and places the stack
> - * below this.
> + * code to allow the C runtime to reserve space on the stack for writable
> + * 'globals' such as GD and the malloc arena.
> *
> - * This function requires a stack[1] Normally this is at @top. The function
> - * starts allocating space from 64 bytes below @top. First it creates space
> - * for global_data. Then it calls arch_setup_gd() which sets gd to point to
> - * the global_data space and can reserve additional bytes of space if
> - * required). Finally it allocates early malloc() memory
> - * (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this,
> - * and it returned by this function.
> + * @return: size of reserved area
> + */
> +ulong board_init_f_get_reserve_size(void);
> +
> +/**
> + * board_init_f_init_reserve - initialize the reserved area(s)
> *
> - * [1] Strictly speaking it would be possible to implement this function
> - * in C on many archs such that it does not require a stack. However this
> - * does not seem hugely important as only 64 byte are wasted. The 64 bytes
> - * are used to handle the calling standard which generally requires pushing
> - * addresses or registers onto the stack. We should be able to get away with
> - * less if this becomes important.
> + * This function is called once the C runtime has allocated the reserved
> + * area on the stack. It must initialize the GD at the base of that area.
> *
> - * @top: Top of available memory, also normally the top of the stack
> - * @return: New stack location
> + * @base: top from which reservation was done
> */
> -ulong board_init_f_mem(ulong top);
> +void board_init_f_init_reserve(ulong base);
>
> /**
> * arch_setup_gd() - Set up the global_data pointer
> --
> 2.5.0
>
Regards,
Simon
More information about the U-Boot
mailing list