[U-Boot] [PATCH v6 07/23] rockchip: Bring in RK3036 device tree file includes and bindings
Lin Huang
hl at rock-chips.com
Tue Nov 17 07:20:15 CET 2015
Since rk3036 device tree file still in reviewing, bring it from
https://patchwork.kernel.org/patch/7203371/ and add some aliases
we need in uboot
Signed-off-by: Lin Huang <hl at rock-chips.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes in v1:
- clean copyright announcement
Changes in v2: None
Changes in v3: None
Changes in v4: None
Changes in v5: None
Changes in v6: None
arch/arm/dts/rk3036.dtsi | 427 +++++++++++++++++++++++++++++++++
include/dt-bindings/clock/rk3036-cru.h | 186 ++++++++++++++
2 files changed, 613 insertions(+)
create mode 100644 arch/arm/dts/rk3036.dtsi
create mode 100644 include/dt-bindings/clock/rk3036-cru.h
diff --git a/arch/arm/dts/rk3036.dtsi b/arch/arm/dts/rk3036.dtsi
new file mode 100644
index 0000000..0daae1e
--- /dev/null
+++ b/arch/arm/dts/rk3036.dtsi
@@ -0,0 +1,427 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3036";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ i2c1 = &i2c1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ mmc0 = &emmc;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "rockchip,rk3036-smp";
+
+ cpu0: cpu at f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ operating-points = <
+ /* KHz uV */
+ 816000 1000000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ resets = <&cru SRST_CORE0>;
+ };
+ cpu1: cpu at f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ resets = <&cru SRST_CORE1>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma at 20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20078000 0x4000>;
+ arm,pl330-broken-no-flushp;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ cru: clock-controller at 20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>;
+ assigned-clock-rates = <594000000>;
+ };
+
+ uart0: serial at 20060000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20060000 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ };
+
+ uart1: serial at 20064000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20064000 0x100>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ };
+
+ uart2: serial at 20068000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20068000 0x100>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ };
+
+ pwm0: pwm at 20050000 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20050000 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm1: pwm at 20050010 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20050010 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm2: pwm at 20050020 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20050020 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm3: pwm at 20050030 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20050030 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ sram: sram at 10080000 {
+ compatible = "rockchip,rk3036-smp-sram", "mmio-sram";
+ reg = <0x10080000 0x2000>;
+ };
+
+ gic: interrupt-controller at 10139000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x10139000 0x1000>,
+ <0x1013a000 0x1000>,
+ <0x1013c000 0x2000>,
+ <0x1013e000 0x2000>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ grf: syscon at 20008000 {
+ compatible = "rockchip,rk3036-grf", "syscon";
+ reg = <0x20008000 0x1000>;
+ };
+
+ usb_otg: usb at 10180000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x10180000 0x40000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
+ status = "disabled";
+ };
+
+ usb_host: usb at 101c0000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x101c0000 0x40000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG1>;
+ clock-names = "otg";
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ emmc: dwmmc at 1021c000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ dmas = <&pdma 12>;
+ dma-names = "rx-tx";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x1021c000 0x4000>;
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ default-sample-phase = <158>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3036-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0 at 2007c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2007c000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1 at 20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2 at 20084000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20084000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ emmc {
+ /*
+ * We run eMMC at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+ <1 25 RK_FUNC_2 &pcfg_pull_none>,
+ <1 26 RK_FUNC_2 &pcfg_pull_none>,
+ <1 27 RK_FUNC_2 &pcfg_pull_none>;
+ /*
+ <1 28 RK_FUNC_2 &pcfg_pull_up>,
+ <1 29 RK_FUNC_2 &pcfg_pull_up>,
+ <1 30 RK_FUNC_2 &pcfg_pull_up>,
+ <1 31 RK_FUNC_2 &pcfg_pull_up>;
+ */
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
+ <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+ <2 23 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart1 */
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+ <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <0 1 2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <0 27 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+ };
+
+ i2c1: i2c at 20056000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x20056000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+};
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
new file mode 100644
index 0000000..87acf4a
--- /dev/null
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko at sntech.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_GPLL 3
+#define ARMCLK 4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU 64
+#define SCLK_SPI 65
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_NANDC 76
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_OTGPHY0 93
+#define SCLK_LCDC 100
+#define SCLK_HDMI 109
+#define SCLK_HEVC 111
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+#define SCLK_PVTM_CORE 123
+#define SCLK_PVTM_GPU 124
+#define SCLK_PVTM_VIDEO 125
+#define SCLK_MAC 151
+#define SCLK_MACREF 152
+#define SCLK_SFC 160
+
+#define DCLK_LCDC 190
+
+/* aclk gates */
+#define ACLK_DMAC2 194
+#define ACLK_LCDC 197
+#define ACLK_VIO 203
+#define ACLK_VCODEC 208
+#define ACLK_CPU 209
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_SPI 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_HDMI 360
+#define PCLK_CPU 362
+#define PCLK_PERI 363
+#define PCLK_DDRUPCTL 364
+#define PCLK_WDT 368
+
+/* hclk gates */
+#define HCLK_OTG0 449
+#define HCLK_OTG1 450
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_I2S 462
+#define HCLK_LCDC 465
+#define HCLK_ROM 467
+#define HCLK_VIO_BUS 472
+#define HCLK_VCODEC 476
+#define HCLK_CPU 477
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0 0
+#define SRST_CORE1 1
+#define SRST_CORE0_DBG 4
+#define SRST_CORE1_DBG 5
+#define SRST_CORE0_POR 8
+#define SRST_CORE1_POR 9
+#define SRST_L2C 12
+#define SRST_TOPDBG 13
+#define SRST_STRC_SYS_A 14
+#define SRST_PD_CORE_NIU 15
+
+#define SRST_TIMER2 16
+#define SRST_CPUSYS_H 17
+#define SRST_AHB2APB_H 19
+#define SRST_TIMER3 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_PERI_NIU 23
+#define SRST_I2S 24
+#define SRST_DDR_PLL 25
+#define SRST_GPU_DLL 26
+#define SRST_TIMER0 27
+#define SRST_TIMER1 28
+#define SRST_CORE_DLL 29
+#define SRST_EFUSE_P 30
+#define SRST_ACODEC_P 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_SFC 47
+
+#define SRST_PWM0 48
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_GRF 55
+#define SRST_PERIPHSYS_A 57
+#define SRST_PERIPHSYS_H 58
+#define SRST_PERIPHSYS_P 59
+#define SRST_CPU_PERI 61
+#define SRST_EMEM_PERI 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMA2 64
+#define SRST_MAC 66
+#define SRST_NANDC 68
+#define SRST_USBOTG0 69
+#define SRST_OTGC0 71
+#define SRST_USBOTG1 72
+#define SRST_OTGC1 74
+#define SRST_DDRMSCH 79
+
+#define SRST_MMC0 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI0 84
+#define SRST_WDT 86
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_BUS_H 99
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_USBPOR 105
+
+#define SRST_VCODEC_A 112
+#define SRST_VCODEC_H 113
+#define SRST_VIO1_A 114
+#define SRST_HEVC 115
+#define SRST_VCODEC_NIU_A 116
+#define SRST_LCDC1_A 117
+#define SRST_LCDC1_H 118
+#define SRST_LCDC1_D 119
+#define SRST_GPU 120
+#define SRST_GPU_NIU_A 122
+
+#define SRST_DBG_P 131
+
+#endif
--
1.9.1
More information about the U-Boot
mailing list