[U-Boot] [PATCH v2 10/15] powerpc/km8360: fix the ODT parameters for CS0

[Valentin Longchamp]

The ODT parameters for km8360 set the ODT_WR_ACS bit in u-boot KM-2011.09
that is used in the release bootpackage for kmcoge5ne. During the
transition from the kmeter1 to km8360 this was changed to
ODT_RD_ONLY_CURRENT, which is uncorrect and causes faulty RAM accesses at
low temperatures.

This is now changed to ODT_WR_ONLY_CURRENT which is the equivalent of
ODT_WR_ACS.

Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>

---

Changes in v2:
- Rewritten commit message to get rid of internal git commit reference

 include/configs/km8360.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/km8360.h b/include/configs/km8360.h
index 04cde46..5034fda 100644
--- a/include/configs/km8360.h
+++ b/include/configs/km8360.h
@@ -100,7 +100,7 @@
 #define CONFIG_SYS_DDR_CS0_CONFIG (\
 	CSCONFIG_EN | \
 	CSCONFIG_AP | \
-	CSCONFIG_ODT_RD_ONLY_CURRENT | \
+	CSCONFIG_ODT_WR_ONLY_CURRENT | \
 	CSCONFIG_BANK_BIT_3 | \
 	CSCONFIG_ROW_BIT_13 | \
 	CSCONFIG_COL_BIT_10)
@@ -108,7 +108,7 @@
 #define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_AP | \
 					 CSCONFIG_ROW_BIT_13 | \
 					 CSCONFIG_COL_BIT_10 | \
-					 CSCONFIG_ODT_RD_ONLY_CURRENT)
+					 CSCONFIG_ODT_WR_ONLY_CURRENT)
 #endif
 
 #define CONFIG_SYS_DDR_CLK_CNTL (\
-- 
1.8.3.1