[U-Boot] [PATCH 20/25] dm: ahci: Convert to use new DM PCI API

Bin Meng bmeng.cn at gmail.com
Wed Nov 18 06:16:28 CET 2015


Hi Simon,

On Tue, Nov 17, 2015 at 11:53 AM, Simon Glass <sjg at chromium.org> wrote:
> Convert this driver to use the new driver model PCI API.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
>  drivers/block/ahci.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++---
>  include/ahci.h       |  4 ++++
>  2 files changed, 63 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
> index 1ad638e..9c76b2e 100644
> --- a/drivers/block/ahci.c
> +++ b/drivers/block/ahci.c
> @@ -168,7 +168,11 @@ int ahci_reset(void __iomem *base)
>  static int ahci_host_init(struct ahci_probe_ent *probe_ent)
>  {
>  #ifndef CONFIG_SCSI_AHCI_PLAT
> +# ifdef CONFIG_DM_PCI
> +       struct udevice *dev = probe_ent->dev;
> +# else
>         pci_dev_t pdev = probe_ent->dev;
> +# endif
>         u16 tmp16;
>         unsigned short vendor;
>  #endif
> @@ -193,6 +197,16 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
>         writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
>
>  #ifndef CONFIG_SCSI_AHCI_PLAT
> +# ifdef CONFIG_DM_PCI
> +       dm_pci_read_config16(dev, PCI_VENDOR_ID, &vendor);

We should get the vendor via dev_get_parent_platdata(dev).

> +
> +       if (vendor == PCI_VENDOR_ID_INTEL) {
> +               u16 tmp16;
> +
> +               dm_pci_read_config16(dev, 0x92, &tmp16);
> +               dm_pci_write_config16(dev, 0x92, tmp16 | 0xf);
> +       }
> +# else
>         pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
>
>         if (vendor == PCI_VENDOR_ID_INTEL) {
> @@ -201,6 +215,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
>                 tmp16 |= 0xf;
>                 pci_write_config_word(pdev, 0x92, tmp16);
>         }
> +# endif
>  #endif
>         probe_ent->cap = readl(mmio + HOST_CAP);
>         probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL);
> @@ -313,9 +328,15 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
>         tmp = readl(mmio + HOST_CTL);
>         debug("HOST_CTL 0x%x\n", tmp);
>  #ifndef CONFIG_SCSI_AHCI_PLAT
> +# ifdef CONFIG_DM_PCI
> +       dm_pci_read_config16(dev, PCI_COMMAND, &tmp16);
> +       tmp |= PCI_COMMAND_MASTER;
> +       dm_pci_write_config16(dev, PCI_COMMAND, tmp16);
> +# else
>         pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
>         tmp |= PCI_COMMAND_MASTER;
>         pci_write_config_word(pdev, PCI_COMMAND, tmp16);
> +# endif
>  #endif
>         return 0;
>  }
> @@ -324,7 +345,11 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
>  static void ahci_print_info(struct ahci_probe_ent *probe_ent)
>  {
>  #ifndef CONFIG_SCSI_AHCI_PLAT
> +# ifdef CONFIG_DM_PCI
> +       struct udevice *dev = probe_ent->dev;
> +# else
>         pci_dev_t pdev = probe_ent->dev;
> +# endif
>         u16 cc;
>  #endif
>         void __iomem *mmio = probe_ent->mmio_base;
> @@ -350,7 +375,11 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
>  #ifdef CONFIG_SCSI_AHCI_PLAT
>         scc_s = "SATA";
>  #else
> +# ifdef CONFIG_DM_PCI
> +       dm_pci_read_config16(dev, 0x0a, &cc);
> +# else
>         pci_read_config_word(pdev, 0x0a, &cc);
> +# endif
>         if (cc == 0x0101)
>                 scc_s = "IDE";
>         else if (cc == 0x0106)
> @@ -395,7 +424,11 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
>  }
>
>  #ifndef CONFIG_SCSI_AHCI_PLAT
> -static int ahci_init_one(pci_dev_t pdev)
> +# ifdef CONFIG_DM_PCI
> +static int ahci_init_one(struct udevice *dev)
> +# else
> +static int ahci_init_one(pci_dev_t dev)
> +# endif
>  {
>         u16 vendor;
>         int rc;
> @@ -407,7 +440,7 @@ static int ahci_init_one(pci_dev_t pdev)
>         }
>
>         memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
> -       probe_ent->dev = pdev;
> +       probe_ent->dev = dev;
>
>         probe_ent->host_flags = ATA_FLAG_SATA
>                                 | ATA_FLAG_NO_LEGACY
> @@ -417,9 +450,20 @@ static int ahci_init_one(pci_dev_t pdev)
>         probe_ent->pio_mask = 0x1f;
>         probe_ent->udma_mask = 0x7f;    /*Fixme,assume to support UDMA6 */
>
> +#ifdef CONFIG_DM_PCI
> +       probe_ent->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5,
> +                                             PCI_REGION_MEM);
> +
> +       /* Take from kernel:
> +        * JMicron-specific fixup:
> +        * make sure we're in AHCI mode
> +        */
> +       dm_pci_read_config16(dev, PCI_VENDOR_ID, &vendor);
> +       if (vendor == 0x197b)
> +               dm_pci_write_config8(dev, 0x41, 0xa1);
> +#else
>         probe_ent->mmio_base = pci_map_bar(pdev, PCI_BASE_ADDRESS_5,
>                                            PCI_REGION_MEM);
> -       debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base);
>
>         /* Take from kernel:
>          * JMicron-specific fixup:
> @@ -428,7 +472,9 @@ static int ahci_init_one(pci_dev_t pdev)
>         pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
>         if (vendor == 0x197b)
>                 pci_write_config_byte(pdev, 0x41, 0xa1);
> +#endif
>
> +       debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base);
>         /* initialize adapter */
>         rc = ahci_host_init(probe_ent);
>         if (rc)
> @@ -915,7 +961,17 @@ void scsi_low_level_init(int busdevfunc)
>         u32 linkmap;
>
>  #ifndef CONFIG_SCSI_AHCI_PLAT
> +# ifdef CONFIG_DM_PCI
> +       struct udevice *dev;
> +       int ret;
> +
> +       ret = pci_bus_find_bdf(busdevfunc, &dev);
> +       if (ret)
> +               return;
> +       ahci_init_one(dev);
> +# else
>         ahci_init_one(busdevfunc);
> +# endif
>  #endif
>
>         linkmap = probe_ent->link_port_map;
> diff --git a/include/ahci.h b/include/ahci.h
> index 0bdedac..a956c6f 100644
> --- a/include/ahci.h
> +++ b/include/ahci.h
> @@ -145,7 +145,11 @@ struct ahci_ioports {
>  };
>
>  struct ahci_probe_ent {
> +#ifdef CONFIG_DM_PCI
> +       struct udevice *dev;
> +#else
>         pci_dev_t       dev;
> +#endif
>         struct ahci_ioports     port[AHCI_MAX_PORTS];
>         u32     n_ports;
>         u32     hard_port_no;
> --

Regards,
Bin


More information about the U-Boot mailing list