[U-Boot] [PATCH v2 06/13] ns16550: unify serial_rockchip

Thomas Chou thomas at wytron.com.tw
Wed Nov 18 14:44:52 CET 2015


Unify serial_rockchip, and use the generic binding.

Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
 arch/arm/dts/rk3288.dtsi         |  5 +++++
 arch/arm/mach-rockchip/Kconfig   |  3 ---
 drivers/serial/Kconfig           | 11 +---------
 drivers/serial/Makefile          |  1 -
 drivers/serial/serial_rockchip.c | 43 ----------------------------------------
 5 files changed, 6 insertions(+), 57 deletions(-)
 delete mode 100644 drivers/serial/serial_rockchip.c

diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
index 0f49709..ac367f8 100644
--- a/arch/arm/dts/rk3288.dtsi
+++ b/arch/arm/dts/rk3288.dtsi
@@ -324,6 +324,7 @@
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		clock-frequency = <24000000>;
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
 		pinctrl-names = "default";
@@ -337,6 +338,7 @@
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		clock-frequency = <24000000>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
 		pinctrl-names = "default";
@@ -350,6 +352,7 @@
 		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		clock-frequency = <24000000>;
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		clock-names = "baudclk", "apb_pclk";
 		pinctrl-names = "default";
@@ -362,6 +365,7 @@
 		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		clock-frequency = <24000000>;
 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 		clock-names = "baudclk", "apb_pclk";
 		pinctrl-names = "default";
@@ -375,6 +379,7 @@
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		clock-frequency = <24000000>;
 		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
 		clock-names = "baudclk", "apb_pclk";
 		pinctrl-names = "default";
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ab50f4e..3f7dc8e 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -33,9 +33,6 @@ config DM_I2C
 config DM_GPIO
 	default y
 
-config ROCKCHIP_SERIAL
-	default y
-
 source "arch/arm/mach-rockchip/rk3288/Kconfig"
 
 endif
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b41f508..1239416 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -186,19 +186,10 @@ config ALTERA_UART
 	  Select this to enable an UART for Altera devices. Please find
 	  details on the "Embedded Peripherals IP User Guide" of Altera.
 
-config ROCKCHIP_SERIAL
-	bool "Rockchip on-chip UART support"
-	depends on ARCH_ROCKCHIP && DM_SERIAL
-	help
-	  Select this to enable a debug UART for Rockchip devices. This uses
-	  the ns16550 driver. You will need to #define CONFIG_SYS_NS16550 in
-	  your board config header. The clock input is automatically set to
-	  use the oscillator (24MHz).
-
 config NS16550_SERIAL
 	bool "NS16550 UART or compatible"
 	depends on DM_SERIAL
-	default y if X86 || PPC
+	default y if X86 || PPC || ARCH_ROCKCHIP
 	help
 	  Support NS16550 UART or compatible with driver model. This can be
 	  enabled in the device tree with the correct input clock frequency.
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 9f61113..debc175 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
 obj-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
 obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o
 obj-$(CONFIG_MXS_AUART) += mxs_auart.o
-obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
 obj-$(CONFIG_ARC_SERIAL) += serial_arc.o
 obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o
 obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
diff --git a/drivers/serial/serial_rockchip.c b/drivers/serial/serial_rockchip.c
deleted file mode 100644
index 0e7bbfc..0000000
--- a/drivers/serial/serial_rockchip.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (c) 2015 Google, Inc
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <ns16550.h>
-#include <serial.h>
-#include <asm/arch/clock.h>
-
-static const struct udevice_id rockchip_serial_ids[] = {
-	{ .compatible = "rockchip,rk3288-uart" },
-	{ }
-};
-
-static int rockchip_serial_ofdata_to_platdata(struct udevice *dev)
-{
-	struct ns16550_platdata *plat = dev_get_platdata(dev);
-	int ret;
-
-	ret = ns16550_serial_ofdata_to_platdata(dev);
-	if (ret)
-		return ret;
-
-	/* Do all Rockchip parts use 24MHz? */
-	plat->clock = 24 * 1000000;
-
-	return 0;
-}
-
-U_BOOT_DRIVER(serial_ns16550) = {
-	.name	= "serial_rockchip",
-	.id	= UCLASS_SERIAL,
-	.of_match = rockchip_serial_ids,
-	.ofdata_to_platdata = rockchip_serial_ofdata_to_platdata,
-	.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
-	.priv_auto_alloc_size = sizeof(struct NS16550),
-	.probe = ns16550_serial_probe,
-	.ops	= &ns16550_serial_ops,
-	.flags	= DM_FLAG_PRE_RELOC,
-};
-- 
2.5.0



More information about the U-Boot mailing list