[U-Boot] [PATCH 02/10] ARM: socfpga: arria10: add system manager defines

[dinguyen at opensource.altera.com]

From: Dinh Nguyen <dinguyen at opensource.altera.com>

Add system manager defines for Arria10.

Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
---
 .../mach-socfpga/include/mach/system_manager_a10.h | 157 +++++++++++++++++++++
 1 file changed, 157 insertions(+)
 create mode 100644 arch/arm/mach-socfpga/include/mach/system_manager_a10.h

diff --git a/arch/arm/mach-socfpga/include/mach/system_manager_a10.h b/arch/arm/mach-socfpga/include/mach/system_manager_a10.h
new file mode 100644
index 0000000..d01b837
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/system_manager_a10.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	_SOCFPGA_SYSTEM_MANAGER_A10_H_
+#define	_SOCFPGA_SYSTEM_MANAGER_A10_H_
+
+#ifndef __ASSEMBLY__
+struct socfpga_system_manager {
+	u32  siliconid1;
+	u32  siliconid2;
+	u32  wddbg;
+	u32  bootinfo;
+	u32  mpu_ctrl_l2_ecc;
+	u32  _pad_0x14_0x1f[3];
+	u32  dma;
+	u32  dma_periph;
+	u32  sdmmcgrp_ctrl;
+	u32  sdmmc_l3master;
+	u32  nand_bootstrap;
+	u32  nand_l3master;
+	u32  usb0_l3master;
+	u32  usb1_l3master;
+	u32  emac_global;
+	u32  emac0;
+	u32  emac1;
+	u32  emac2;
+	u32  _pad_0x50_0x5f[4];
+	u32  fpgaintf_en_global;
+	u32  fpgaintf_en_0;
+	u32  fpgaintf_en_1;
+	u32  fpgaintf_en_2;
+	u32  fpgaintf_en_3;
+	u32  _pad_0x74_0x7f[3];
+	u32  noc_addr_remap_value;
+	u32  noc_addr_remap_set;
+	u32  noc_addr_remap_clear;
+	u32  _pad_0x8c_0x8f;
+	u32  ecc_intmask_value;
+	u32  ecc_intmask_set;
+	u32  ecc_intmask_clr;
+	u32  ecc_intstatus_serr;
+	u32  ecc_intstatus_derr;
+	u32  mpu_status_l2_ecc;
+	u32  mpu_clear_l2_ecc;
+	u32  mpu_status_l1_parity;
+	u32  mpu_clear_l1_parity;
+	u32  mpu_set_l1_parity;
+	u32  _pad_0xb8_0xbf[2];
+	u32  noc_timeout;
+	u32  noc_idlereq_set;
+	u32  noc_idlereq_clr;
+	u32  noc_idlereq_value;
+	u32  noc_idleack;
+	u32  noc_idlestatus;
+	u32  fpga2soc_ctrl;
+	u32  _pad_0xdc_0xff[9];
+	u32  tsmc_tsel_0;
+	u32  tsmc_tsel_1;
+	u32  tsmc_tsel_2;
+	u32  tsmc_tsel_3;
+	u32  _pad_0x110_0x200[60];
+	u32  romhw_ctrl;
+	u32  romcode_ctrl;
+	u32  romcode_cpu1startaddr;
+	u32  romcode_initswstate;
+	u32  romcode_initswlastld;
+	u32  _pad_0x214_0x217;
+	u32  warmram_enable;
+	u32  warmram_datastart;
+	u32  warmram_length;
+	u32  warmram_execution;
+	u32  warmram_crc;
+	u32  _pad_0x22c_0x22f;
+	u32  isw_handoff[8];
+	u32  romcode_bootromswstate[8];
+};
+#endif /* __ASSEMBLY__ */
+
+/* bit fields */
+#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX		(1<<0)
+#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO		(1<<1)
+#define SYSMGR_ECC_OCRAM_EN		(1<<0)
+#define SYSMGR_ECC_OCRAM_SERR		(1<<3)
+#define SYSMGR_ECC_OCRAM_DERR		(1<<4)
+#define SYSMGR_FPGAINTF_USEFPGA		0x1
+#define SYSMGR_FPGAINTF_SPIM0		(1<<0)
+#define SYSMGR_FPGAINTF_SPIM1		(1<<1)
+#define SYSMGR_FPGAINTF_EMAC0		(1<<2)
+#define SYSMGR_FPGAINTF_EMAC1		(1<<3)
+#define SYSMGR_FPGAINTF_NAND		(1<<4)
+#define SYSMGR_FPGAINTF_SDMMC		(1<<5)
+
+/* Enumeration: sysmgr::emacgrp::ctrl::physel::enum                        */
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
+#define SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB 0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB 2
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
+
+/* For dedicated IO configuration */
+/* Voltage select enums */
+#define VOLTAGE_SEL_3V		0x0
+#define VOLTAGE_SEL_1P8V	0x1
+#define VOLTAGE_SEL_2P5V	0x2
+
+/* Input buffer enable */
+#define INPUT_BUF_DISABLE	(0)
+#define INPUT_BUF_1P8V		(1)
+#define INPUT_BUF_2P5V3V	(2)
+
+/* Weak pull up enable */
+#define WK_PU_DISABLE		(0)
+#define WK_PU_ENABLE		(1)
+
+/* Pull up slew rate control */
+#define PU_SLW_RT_SLOW		(0)
+#define PU_SLW_RT_FAST		(1)
+#define PU_SLW_RT_DEFAULT	PU_SLW_RT_SLOW
+
+/* Pull down slew rate control */
+#define PD_SLW_RT_SLOW		(0)
+#define PD_SLW_RT_FAST		(1)
+#define PD_SLW_RT_DEFAULT	PD_SLW_RT_SLOW
+
+/* Drive strength control */
+#define PU_DRV_STRG_DEFAULT	(0x10)
+#define PD_DRV_STRG_DEFAULT	(0x10)
+
+/* bit position */
+#define PD_DRV_STRG_LSB		(0)
+#define PD_SLW_RT_LSB		(5)
+#define PU_DRV_STRG_LSB		(8)
+#define PU_SLW_RT_LSB		(13)
+#define WK_PU_LSB		(16)
+#define INPUT_BUF_LSB		(17)
+#define BIAS_TRIM_LSB		(19)
+#define VOLTAGE_SEL_LSB		(0)
+
+#define ALT_SYSMGR_NOC_H2F_SET_MSK	0x00000001
+#define ALT_SYSMGR_NOC_LWH2F_SET_MSK	0x00000010
+#define ALT_SYSMGR_NOC_F2H_SET_MSK	0x00000100
+#define ALT_SYSMGR_NOC_F2SDR0_SET_MSK	0x00010000
+#define ALT_SYSMGR_NOC_F2SDR1_SET_MSK	0x00100000
+#define ALT_SYSMGR_NOC_F2SDR2_SET_MSK	0x01000000
+#define ALT_SYSMGR_NOC_TMO_EN_SET_MSK	0x00000001
+
+#define ALT_SYSMGR_ECC_INTSTAT_SERR_OCRAM_SET_MSK    0x00000002
+#define ALT_SYSMGR_ECC_INTSTAT_DERR_OCRAM_SET_MSK    0x00000002
+
+#define SYSMGR_A10_SDMMC_CTRL_SET(smplsel, drvsel)	\
+	((drvsel << 0) & 0x7) | ((smplsel << 4) & 0x70)
+
+#endif /* _SOCFPGA_SYSTEM_MANAGER_A10_H_ */
-- 
2.6.2