[U-Boot] [PATCH 10/10] ARM: socfpga: arria10: add support for building Arria10

[Dinh Nguyen]

On 11/20/2015 06:49 AM, Marek Vasut wrote:
> On Friday, November 20, 2015 at 12:28:47 AM, Dinh Nguyen wrote:
>> On 11/19/2015 04:45 PM, Marek Vasut wrote:
>>> On Thursday, November 19, 2015 at 10:35:47 PM,
>>> dinguyen at opensource.altera.com
>>>
>>> wrote:
>>>> From: Dinh Nguyen <dinguyen at opensource.altera.com>
>>>>
>>>> Update Makefile to build Arria 10.
>>>>
>>>> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
>>>> ---
>>>>
>>>>  arch/arm/mach-socfpga/Makefile         | 7 +++++--
>>>>  arch/arm/mach-socfpga/arria10/Makefile | 7 +++++++
>>>>  2 files changed, 12 insertions(+), 2 deletions(-)
>>>>  create mode 100644 arch/arm/mach-socfpga/arria10/Makefile
>>>>
>>>> diff --git a/arch/arm/mach-socfpga/Makefile
>>>> b/arch/arm/mach-socfpga/Makefile index 316b326..0dbe9bb 100644
>>>> --- a/arch/arm/mach-socfpga/Makefile
>>>> +++ b/arch/arm/mach-socfpga/Makefile
>>>> @@ -6,15 +6,18 @@
>>>>
>>>>  #
>>>>  # SPDX-License-Identifier:	GPL-2.0+
>>>>  #
>>>>
>>>> -
>>>> +ifneq ($(CONFIG_TARGET_SOCFPGA_ARRIA10),y)
>>>>
>>>>  obj-y	+= misc.o timer.o reset_manager.o system_manager.o
>>>
>>> clock_manager.o \
>>>
>>>>  	   fpga_manager.o scan_manager.o
>>>>  
>>>>  obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
>>>>
>>>> -
>>>>
>>>>  # QTS-generated config file wrappers
>>>>  obj-y	+= wrap_pll_config.o
>>>>  obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o	\
>>>>  
>>>>  			   wrap_sdram_config.o
>>>>
>>>> +else
>>>> +obj-y	+= arria10/
>>>
>>> So why exactly does A10 have it's own dedicated dir if most of the code
>>> is probably shared between A10 and AV/CV ?
>>
>> Yes, there are some sharing. But I think that there will be enough
>> differences that will ultimately warrant it's own directory. I think
>> with it's own directory, the Makefile changes stay a bit cleaner. I
> 
> Linux doesn't seem to require a separate directory though, does it ?
> I'm not convinced we need one either.
> 
>> One of the biggest differences is that the A10's SDRAM support is going
>> to be a bit ugly.
> 
> The SDRAM code goes into drivers/ddr/ , no problem.
> 
>> The main point is that we need to program the FPGA
>> during U-Boot booting up with a ~>10 MB rbf file while being limited to
>> the OCRAM's size. I would like to contain this ugliness in it's own
>> directory.
> 
> What's the problem with this ? We already support loading files from storage
> in SPL, so just compile the FPGA manager into SPL as well and use it.
> 

Ok, let me re-work it all under the c5/a5 directory. Thanks for reviewing.

Dinh