[U-Boot] [PATCH 1/1] fsl_qspi: Pet the watchdog while reading/writing

York Sun yorksun at freescale.com
Mon Nov 23 19:51:49 CET 2015



On 11/04/2015 12:19 AM, Alexander Stein wrote:
> When reading a large blob. e.g. a linux kernel (several MiBs) a watchdog
> timeout might occur meanwhile. So pet the watchdog while operating on
> the flash.

Alexander,

On which platform was this watchdog issue found?

> 
> Signed-off-by: Alexander Stein <alexander.stein at systec-electronic.com>
> ---
>  drivers/spi/fsl_qspi.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
> index ed39114..feec3e8 100644
> --- a/drivers/spi/fsl_qspi.c
> +++ b/drivers/spi/fsl_qspi.c
> @@ -13,6 +13,7 @@
>  #include <linux/sizes.h>
>  #include <dm.h>
>  #include <errno.h>
> +#include <watchdog.h>
>  #include "fsl_qspi.h"
>  
>  DECLARE_GLOBAL_DATA_PTR;
> @@ -527,6 +528,8 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
>  	to_or_from = priv->sf_addr + priv->cur_amba_base;
>  
>  	while (len > 0) {
> +		WATCHDOG_RESET();
> +
>  		qspi_write32(priv->flags, &regs->sfar, to_or_from);
>  
>  		size = (len > RX_BUFFER_SIZE) ?
> @@ -574,6 +577,8 @@ static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
>  
>  	status_reg = 0;
>  	while ((status_reg & FLASH_STATUS_WEL) != FLASH_STATUS_WEL) {
> +		WATCHDOG_RESET();
> +
>  		qspi_write32(priv->flags, &regs->ipcr,
>  			     (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0);
>  		while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
> 

York


More information about the U-Boot mailing list