[U-Boot] [PATCH 10/10] ARM: socfpga: arria10: add support for building Arria10

[Dinh Nguyen]

On 11/23/2015 05:03 PM, Marek Vasut wrote:
> On Monday, November 23, 2015 at 11:50:15 PM, Dinh Nguyen wrote:
>> On 11/23/2015 04:46 PM, Marek Vasut wrote:
>>> On Monday, November 23, 2015 at 11:32:27 PM, Dinh Nguyen wrote:
>>> [...]
>>>
>>>>>>>> The main point is that we need to program the FPGA
>>>>>>>> during U-Boot booting up with a ~>10 MB rbf file while being limited
>>>>>>>> to the OCRAM's size. I would like to contain this ugliness in it's
>>>>>>>> own directory.
>>>>>>>
>>>>>>> What's the problem with this ? We already support loading files from
>>>>>>> storage in SPL, so just compile the FPGA manager into SPL as well and
>>>>>>> use it.
>>>>>>
>>>>>> Ok, let me re-work it all under the c5/a5 directory. Thanks for
>>>>>> reviewing.
>>>>>
>>>>> But you didn't really answer my question -- what is the problem with
>>>>> the FPGA loader in SPL ?
>>>>
>>>> I thought you've already answered your own question. For whatever
>>>> reason, the downstream A10 is re-doing the FPGA manager just for this
>>>> purpose.
>>>
>>> Could the reason be that the FPGA manager in it's current state expects
>>> one big buffer with the entire FPGA bitstream ? When you're in SPL and
>>> you still don't have DRAM running, you cannot create such buffer
>>> anywhere. Thus, what you need to do is to have some sort of code which
>>> loads a bit of the bitstream file at time and feeds it into the FPGA
>>> manager, piece by piece. This should be doable pretty easily, what do
>>> you think ?
>>
>> That's exactly what is being in the mach-socfpga directory.
> 
> Um, am I missing it in this patchset ?
> 

No, you're not missing it, I have not sent it up yet. That support is in
the downstream, but also with the fpga-manager driver re-written. I need
to clean this up before I can send it.

>> Yes, but should that code go into mach-socfpga or drivers?
> 
> The FPGA manager bits are already in drivers/fpga/ , so that's where the 
> improvements should go. If you need some special handling in the SPL,
> that should be in mach-socfpga . In case it's too much change to the current 
> SPL, moving the spl.c to spl-gen5.c and creating new spl-gen10.c might make 
> sense ... or something like that, possibly even with some spl-common.c .
> 

Ok. BTW, Arria10 is not using SPL. It has 256K of OCRAM that U-Boot can
use to setup the SDRAM.

Dinh