[U-Boot] [PATCH v6] arm: atmel: Add SAMA5D2 Xplained board

[Yang, Wenyou]

Hi Andreas,

> -----Original Message-----
> From: Andreas Bießmann [mailto:andreas.devel at googlemail.com]
> Sent: 2015年11月24日 0:29
> To: Yang, Wenyou; U-Boot Mailing List
> Cc: Bo Shen
> Subject: Re: [U-Boot] [PATCH v6] arm: atmel: Add SAMA5D2 Xplained board
> 
> Hi Wenyou,
> 
> On 30.10.15 02:55, Wenyou Yang wrote:
> > The board supports following features:
> >  - Boot media support: SD card/e.MMC/SPI flash,
> >  - Support LCD display (optional, disabled by default),
> >  - Support ethernet,
> >  - Support USB mass storage.
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> 
> I'll fix a few checkpatch warnings while applying

Thank you very much for your review and your help, 

> 
> Andreas
> 
> > ---
> > The patch is based on the following patches sent in mailing list.
> > 	[PATCH] gpio: atmel: Add the PIO4 driver support
> > 	[PATCH] arm: at91: Change the Chip ID registers' addresses
> > 	[PATCH v4] mmc: atmel: Add atmel sdhci support
> > 	[PATCH v3] arm: at91: clock: Add the generated clock support
> >
> > Changes in v6:
> >  1./ change function invocation due to its declaration change,
> > 	at91_enable_periph_generated_clk().
> >
> > Changes in v5:
> >  1./ remove wrong pin config for USB hw init.
> >
> > Changes in v4:
> >  1./ remove __weak attribute for has_lcdc() added in v3.
> >  2./ remove unused goto err_exit.
> >
> > Changes in v3:
> >  1./ change defines-->definitions for more clearly in asm/arch/sama5d2.h.
> >  2./ remove unused cpu_is_sama5d2x() macros.
> >  3./ fix spelling error "adress".
> >  4./ add __weak attribute for has_lcdc().
> >  5./ remove SPL configs.
> >
> > Changes in v2:
> >  1./ re-order SAMA5D2 statements alphabetically.
> >  2./ remove redundant "Unknown CPU type".
> >  3./ rework sama5d2's macros.
> >  4./ remove some #ifdef before functions.
> >  5./ move CONFIG_CMD_SF to Kconfig.
> >  6./ remove NAND macros from config file.
> >  7./ CONFIG_BOOTCOMMAND for sf uses defines in at91-sama5_common.h.
> >
> >  arch/arm/mach-at91/Kconfig                       |    5 +
> >  arch/arm/mach-at91/armv7/Makefile                |    1 +
> >  arch/arm/mach-at91/armv7/sama5d2_devices.c       |   59 +++++
> >  arch/arm/mach-at91/include/mach/at91_pmc.h       |    9 +-
> >  arch/arm/mach-at91/include/mach/atmel_usba_udc.h |    3 +-
> >  arch/arm/mach-at91/include/mach/hardware.h       |    2 +
> >  arch/arm/mach-at91/include/mach/sama5d2.h        |  203 ++++++++++++++++
> >  board/atmel/sama5d2_xplained/Kconfig             |   15 ++
> >  board/atmel/sama5d2_xplained/MAINTAINERS         |    7 +
> >  board/atmel/sama5d2_xplained/Makefile            |    8 +
> >  board/atmel/sama5d2_xplained/sama5d2_xplained.c  |  284
> ++++++++++++++++++++++
> >  configs/sama5d2_xplained_mmc_defconfig           |   11 +
> >  configs/sama5d2_xplained_spiflash_defconfig      |   11 +
> >  include/configs/sama5d2_xplained.h               |  122 ++++++++++
> >  14 files changed, 734 insertions(+), 6 deletions(-)  create mode
> > 100644 arch/arm/mach-at91/armv7/sama5d2_devices.c
> >  create mode 100644 arch/arm/mach-at91/include/mach/sama5d2.h
> >  create mode 100644 board/atmel/sama5d2_xplained/Kconfig
> >  create mode 100644 board/atmel/sama5d2_xplained/MAINTAINERS
> >  create mode 100644 board/atmel/sama5d2_xplained/Makefile
> >  create mode 100644 board/atmel/sama5d2_xplained/sama5d2_xplained.c
> >  create mode 100644 configs/sama5d2_xplained_mmc_defconfig
> >  create mode 100644 configs/sama5d2_xplained_spiflash_defconfig
> >  create mode 100644 include/configs/sama5d2_xplained.h


Best Regards,
Wenyou Yang