[U-Boot] [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect LS2080A

[Kushwaha Prabhakar]

> -----Original Message-----
> From: York Sun [mailto:yorksun at freescale.com]
> Sent: Tuesday, November 24, 2015 12:49 AM
> To: Kushwaha Prabhakar-B32579 <prabhakar at freescale.com>; u-
> boot at lists.denx.de
> Cc: Srivastava Pratiyush-B46174 <pratiyush.srivastava at freescale.com>
> Subject: Re: [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect
> LS2080A
> 
> 
> 
> On 11/09/2015 03:12 AM, Prabhakar Kushwaha wrote:
> > LS2080A is a prime personality of Freescale’s LS2085A. It is a
> > non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe
> endpoint etc.
> > So renaming existing LS2085A code base to reflect LS2080A (Prime
> > personality)
> >
> > Signed-off-by: Pratiyush Mohan Srivastava
> > <pratiyush.srivastava at freescale.com>
> > Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> > ---
> > Changes for v2: Rebased on LS1043 patch set
> 
> <snip>
> 
> > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
> > b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
> > index 2903996..5a91dcb 100644
> > --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
> > +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
> > @@ -8,8 +8,10 @@
> >  #define _FSL_LAYERSCAPE_CPU_H
> >
> >  static struct cpu_type cpu_type_list[] = {
> > -	CPU_TYPE_ENTRY(LS2085, LS2085, 8),
> > +#ifdef CONFIG_LS2080A
> >  	CPU_TYPE_ENTRY(LS2080, LS2080, 8),
> > +#endif
> > +	CPU_TYPE_ENTRY(LS2085, LS2085, 8),
> >  	CPU_TYPE_ENTRY(LS2045, LS2045, 4),
> >  	CPU_TYPE_ENTRY(LS1043, LS1043, 4),
> >  };
> 
> Why using ifdef here?

I am trying to reduce size of table.
Instead of adding all SoC in table only defined the required one at a time. 

--prabhakar