[U-Boot] [PATCH] driver: net: ldpaa: Update the lane number to DPMAC mapping
Prabhakar Kushwaha
prabhakar at freescale.com
Wed Nov 25 06:54:33 CET 2015
As of patch "http://patchwork.ozlabs.org/patch/539748/", serdes_init() is
passing correct DPMAC id.
So Update the lane to DPMAC mapping.
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
drivers/net/ldpaa_eth/ldpaa_wriop.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ldpaa_eth/ldpaa_wriop.c b/drivers/net/ldpaa_eth/ldpaa_wriop.c
index 357b35a..f7f26c2 100644
--- a/drivers/net/ldpaa_eth/ldpaa_wriop.c
+++ b/drivers/net/ldpaa_eth/ldpaa_wriop.c
@@ -23,18 +23,17 @@ __weak phy_interface_t wriop_dpmac_enet_if(int dpmac_id, int lane_prtc)
void wriop_init_dpmac(int sd, int dpmac_id, int lane_prtcl)
{
phy_interface_t enet_if;
- int index = dpmac_id + sd * 8;
- dpmac_info[index].enabled = 0;
- dpmac_info[index].id = 0;
- dpmac_info[index].phy_addr = -1;
- dpmac_info[index].enet_if = PHY_INTERFACE_MODE_NONE;
+ dpmac_info[dpmac_id].enabled = 0;
+ dpmac_info[dpmac_id].id = 0;
+ dpmac_info[dpmac_id].phy_addr = -1;
+ dpmac_info[dpmac_id].enet_if = PHY_INTERFACE_MODE_NONE;
- enet_if = wriop_dpmac_enet_if(index, lane_prtcl);
+ enet_if = wriop_dpmac_enet_if(dpmac_id, lane_prtcl);
if (enet_if != PHY_INTERFACE_MODE_NONE) {
- dpmac_info[index].enabled = 1;
- dpmac_info[index].id = index;
- dpmac_info[index].enet_if = enet_if;
+ dpmac_info[dpmac_id].enabled = 1;
+ dpmac_info[dpmac_id].id = dpmac_id;
+ dpmac_info[dpmac_id].enet_if = enet_if;
}
}
--
1.9.1
More information about the U-Boot
mailing list