[U-Boot] [PATCH] mmc: socfpga_dw_mmc: Move drvsel and smplsel to dts

Marek Vasut marex at denx.de
Thu Nov 26 01:50:25 CET 2015


On Thursday, November 26, 2015 at 01:41:12 AM, clsee wrote:
> From: Chin Liang See <clsee at altera.com>
> 
> socfpga_dw_mmc driver will obtain the drvsel and
> smplsel value from device tree instead of definition
> in config header file.
> 
> Signed-off-by: Chin Liang See <clsee at altera.com>
> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux at gmail.com>
> Cc: Pavel Machek <pavel at denx.de>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Pantelis Antoniou <pantelis.antoniou at konsulko.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Jaehoon Chung <jh80.chung at samsung.com>
> ---
>  arch/arm/dts/socfpga_cyclone5.dtsi |  2 ++
>  drivers/mmc/socfpga_dw_mmc.c       | 24 ++++++++++++++++++++++--
>  include/configs/socfpga_common.h   |  2 --
>  3 files changed, 24 insertions(+), 4 deletions(-)

Hi!

[...]

> @@ -78,11 +87,19 @@ static int socfpga_dwmci_of_probe(const void *blob, int
> node, const int idx) return -EINVAL;
>  	}
> 
> +	drvsel = fdtdec_get_uint(blob, node, "drvsel", 0);

The default value here should be 3, otherwise this won't preserve the original
behavior of the driver in case the nodes in DT are missing.

> +	smplsel = fdtdec_get_uint(blob, node, "smplsel", 0);
> +
>  	/* Allocate the host */
>  	host = calloc(1, sizeof(*host));
>  	if (!host)
>  		return -ENOMEM;
> 
> +	/* Allocate the priv */
> +	priv = calloc(1, sizeof(*priv));
> +	if (!priv)
> +		return -ENOMEM;

If this call fails, you're leaking memory, since you calloc() some stuff before.

> +
>  	host->name = "SOCFPGA DWMMC";
>  	host->ioaddr = (void *)reg_base;
>  	host->buswidth = bus_width;
> @@ -92,6 +109,9 @@ static int socfpga_dwmci_of_probe(const void *blob, int
> node, const int idx) host->bus_hz = clk;
>  	host->fifoth_val = MSIZE(0x2) |
>  		RX_WMARK(fifo_depth / 2 - 1) | TX_WMARK(fifo_depth / 2);
> +	priv->drvsel = drvsel;
> +	priv->smplsel = smplsel;
> +	host->priv = priv;

You can move the fdtdec_get_uint() calls here directly, no need to introduce
ad-hoc variable and then just assign it into the private data.

>  	return add_dwmci(host, host->bus_hz, 400000);
>  }
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/socfpga_common.h index f6808b5..b661cc2 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -153,8 +153,6 @@
>  #define CONFIG_DWMMC
>  #define CONFIG_SOCFPGA_DWMMC
>  #define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH	1024
> -#define CONFIG_SOCFPGA_DWMMC_DRVSEL	3
> -#define CONFIG_SOCFPGA_DWMMC_SMPSEL	0
>  /* FIXME */
>  /* using smaller max blk cnt to avoid flooding the limited stack we have
> */ #define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */


More information about the U-Boot mailing list