[U-Boot] [PATCH 10/14] net: gem: Remove zynq_gem_of_init()

Michal Simek michal.simek at xilinx.com
Mon Nov 30 16:05:26 CET 2015


This function was used for OF init before DM.
Remove this function as the part of move to DM.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/net/zynq_gem.c | 42 ------------------------------------------
 include/netdev.h       |  1 -
 2 files changed, 43 deletions(-)

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 9ce1221e8d0f..a569c77aeb60 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -13,8 +13,6 @@
 #include <net.h>
 #include <netdev.h>
 #include <config.h>
-#include <fdtdec.h>
-#include <libfdt.h>
 #include <malloc.h>
 #include <asm/io.h>
 #include <phy.h>
@@ -656,43 +654,3 @@ int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr,
 
 	return 1;
 }
-
-#if CONFIG_IS_ENABLED(OF_CONTROL)
-int zynq_gem_of_init(const void *blob)
-{
-	int offset = 0;
-	u32 ret = 0;
-	u32 reg, phy_reg;
-
-	debug("ZYNQ GEM: Initialization\n");
-
-	do {
-		offset = fdt_node_offset_by_compatible(blob, offset,
-					"xlnx,ps7-ethernet-1.00.a");
-		if (offset != -1) {
-			reg = fdtdec_get_addr(blob, offset, "reg");
-			if (reg != FDT_ADDR_T_NONE) {
-				offset = fdtdec_lookup_phandle(blob, offset,
-							       "phy-handle");
-				if (offset != -1)
-					phy_reg = fdtdec_get_addr(blob, offset,
-								  "reg");
-				else
-					phy_reg = 0;
-
-				debug("ZYNQ GEM: addr %x, phyaddr %x\n",
-				      reg, phy_reg);
-
-				ret |= zynq_gem_initialize(NULL, reg,
-							   phy_reg, 0);
-
-			} else {
-				debug("ZYNQ GEM: Can't get base address\n");
-				return -1;
-			}
-		}
-	} while (offset != -1);
-
-	return ret;
-}
-#endif
diff --git a/include/netdev.h b/include/netdev.h
index 28eab4640760..5c6ae5b5624e 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -87,7 +87,6 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
 							int txpp, int rxpp);
 int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
 						unsigned long ctrl_addr);
-int zynq_gem_of_init(const void *blob);
 int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr,
 			int phy_addr, u32 emio);
 /*
-- 
1.9.1



More information about the U-Boot mailing list