[U-Boot] [PATCH 4/6] dm: pci: Enable VGA address forwarding on bridges
Bin Meng
bmeng.cn at gmail.com
Thu Oct 1 09:36:02 CEST 2015
To support graphics card behind a PCI bridge, the bridge control
register (offset 0x3e) in the configuration space must turn on
VGA address forwarding.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---
drivers/pci/pci-uclass.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index 0035ac7..7b01a13 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -364,9 +364,23 @@ int dm_pci_read_config32(struct udevice *dev, int offset, u32 *valuep)
return 0;
}
+static void set_vga_bridge_bits(struct udevice *dev)
+{
+ struct udevice *parent = dev->parent;
+ u16 bc;
+
+ while (parent->seq != 0) {
+ dm_pci_read_config16(parent, PCI_BRIDGE_CONTROL, &bc);
+ bc |= PCI_BRIDGE_CTL_VGA;
+ dm_pci_write_config16(parent, PCI_BRIDGE_CONTROL, bc);
+ parent = parent->parent;
+ }
+}
+
int pci_auto_config_devices(struct udevice *bus)
{
struct pci_controller *hose = bus->uclass_priv;
+ struct pci_child_platdata *pplat;
unsigned int sub_bus;
struct udevice *dev;
int ret;
@@ -382,6 +396,10 @@ int pci_auto_config_devices(struct udevice *bus)
debug("%s: device %s\n", __func__, dev->name);
max_bus = pciauto_config_device(hose, pci_get_bdf(dev));
sub_bus = max(sub_bus, max_bus);
+
+ pplat = dev_get_parent_platdata(dev);
+ if (pplat->class == (PCI_CLASS_DISPLAY_VGA << 8))
+ set_vga_bridge_bits(dev);
}
debug("%s: done\n", __func__);
--
1.8.2.1
More information about the U-Boot
mailing list