[U-Boot] [PATCH 03/10] net: designware: support phy reset device-tree bindings
Sjoerd Simons
sjoerd.simons at collabora.co.uk
Thu Oct 1 11:48:06 CEST 2015
Add support for the snps,reset-gpio, snps,reset-active-low (optional) and
snps,reset-delays-us device-tree bindings. The combination of these
three define how the PHY should be reset to ensure it's in a sane state.
Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
---
drivers/net/designware.c | 74 ++++++++++++++++++++++++++++++++++++++++++++----
drivers/net/designware.h | 11 +++++++
2 files changed, 79 insertions(+), 6 deletions(-)
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 6433896..f9ceec2 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -28,7 +28,12 @@ DECLARE_GLOBAL_DATA_PTR;
static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
{
+#ifdef CONFIG_DM_ETH
+ struct dw_eth_dev *priv = dev_get_priv((struct udevice *)bus->priv);
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+#else
struct eth_mac_regs *mac_p = bus->priv;
+#endif
ulong start;
u16 miiaddr;
int timeout = CONFIG_MDIO_TIMEOUT;
@@ -51,7 +56,12 @@ static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
u16 val)
{
+#ifdef CONFIG_DM_ETH
+ struct dw_eth_dev *priv = dev_get_priv((struct udevice *)bus->priv);
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+#else
struct eth_mac_regs *mac_p = bus->priv;
+#endif
ulong start;
u16 miiaddr;
int ret = -ETIMEDOUT, timeout = CONFIG_MDIO_TIMEOUT;
@@ -74,7 +84,40 @@ static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
return ret;
}
-static int dw_mdio_init(const char *name, struct eth_mac_regs *mac_regs_p)
+#if CONFIG_DM_ETH
+static int dw_mdio_reset(struct mii_dev *bus)
+{
+ struct udevice *dev = bus->priv;
+ struct dw_eth_pdata *pdata = dev_get_platdata(dev);
+ int ret;
+
+ if (pdata->reset_gpio.dev == NULL)
+ return 0;
+
+ /* reset the phy */
+ ret = dm_gpio_set_value(&pdata->reset_gpio, 0);
+ if (ret)
+ return ret;
+
+ udelay(pdata->reset_delays[0]);
+
+ ret = dm_gpio_set_value(&pdata->reset_gpio, 1);
+ if (ret)
+ return ret;
+
+ udelay(pdata->reset_delays[1]);
+
+ ret = dm_gpio_set_value(&pdata->reset_gpio, 0);
+ if (ret)
+ return ret;
+
+ udelay(pdata->reset_delays[2]);
+
+ return 0;
+}
+#endif
+
+static int dw_mdio_init(const char *name, void *priv)
{
struct mii_dev *bus = mdio_alloc();
@@ -85,9 +128,12 @@ static int dw_mdio_init(const char *name, struct eth_mac_regs *mac_regs_p)
bus->read = dw_mdio_read;
bus->write = dw_mdio_write;
+#ifdef CONFIG_DM_ETH
+ bus->reset = dw_mdio_reset;
+#endif
snprintf(bus->name, sizeof(bus->name), name);
- bus->priv = (void *)mac_regs_p;
+ bus->priv = priv;
return mdio_register(bus);
}
@@ -604,7 +650,7 @@ static int designware_eth_probe(struct udevice *dev)
priv->dma_regs_p = (struct eth_dma_regs *)(iobase + DW_DMA_BASE_OFFSET);
priv->interface = pdata->phy_interface;
- dw_mdio_init(dev->name, priv->mac_regs_p);
+ dw_mdio_init(dev->name, dev);
priv->bus = miiphy_get_dev_by_name(dev->name);
ret = dw_phy_init(priv, dev);
@@ -624,8 +670,11 @@ static const struct eth_ops designware_eth_ops = {
static int designware_eth_ofdata_to_platdata(struct udevice *dev)
{
- struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct dw_eth_pdata *dw_pdata = dev_get_platdata(dev);
+ struct eth_pdata *pdata = &dw_pdata->eth_pdata;
const char *phy_mode;
+ int reset_flags = GPIOD_IS_OUT;
+ int ret = 0;
pdata->iobase = dev_get_addr(dev);
pdata->phy_interface = -1;
@@ -637,7 +686,20 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev)
return -EINVAL;
}
- return 0;
+ if (fdtdec_get_bool(gd->fdt_blob, dev->of_offset,
+ "snps,reset-active-low"))
+ reset_flags |= GPIOD_ACTIVE_LOW;
+
+ ret = gpio_request_by_name(dev, "snps,reset-gpio", 0,
+ &dw_pdata->reset_gpio, reset_flags);
+ if (ret == 0) {
+ ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
+ "snps,reset-delays-us", dw_pdata->reset_delays, 3);
+ } else if (ret == -ENOENT) {
+ ret = 0;
+ }
+
+ return ret;
}
static const struct udevice_id designware_eth_ids[] = {
@@ -655,7 +717,7 @@ U_BOOT_DRIVER(eth_designware) = {
.probe = designware_eth_probe,
.ops = &designware_eth_ops,
.priv_auto_alloc_size = sizeof(struct dw_eth_dev),
- .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+ .platdata_auto_alloc_size = sizeof(struct dw_eth_pdata),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
diff --git a/drivers/net/designware.h b/drivers/net/designware.h
index 4b9ec39..f34263b 100644
--- a/drivers/net/designware.h
+++ b/drivers/net/designware.h
@@ -8,6 +8,9 @@
#ifndef _DW_ETH_H
#define _DW_ETH_H
+#include <common.h>
+#include <asm/gpio.h>
+
#define CONFIG_TX_DESCR_NUM 16
#define CONFIG_RX_DESCR_NUM 16
#define CONFIG_ETH_BUFSIZE 2048
@@ -235,4 +238,12 @@ struct dw_eth_dev {
struct mii_dev *bus;
};
+#ifdef CONFIG_DM_ETH
+struct dw_eth_pdata {
+ struct eth_pdata eth_pdata;
+ struct gpio_desc reset_gpio;
+ u32 reset_delays[3];
+};
+#endif
+
#endif
--
2.5.3
More information about the U-Boot
mailing list