[U-Boot] [PATCH 3/7] sunxi: power: Unify axp pmic function names
Hans de Goede
hdegoede at redhat.com
Sat Oct 3 16:26:19 CEST 2015
Stop prefixing the axp functions for setting voltages, etc. with the
model number, there ever is only one pmic driver built into u-boot,
this allows simplifying the callers.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/cpu/armv7/sunxi/cpu_info.c | 4 +--
arch/arm/cpu/armv7/sunxi/usb_phy.c | 9 -----
board/sunxi/board.c | 70 +++++++++++++++++--------------------
drivers/gpio/axp_gpio.c | 11 +-----
drivers/power/axp152.c | 12 +++----
drivers/power/axp209.c | 39 +++++----------------
drivers/power/axp221.c | 35 +++++++++----------
drivers/video/sunxi_display.c | 6 ++--
include/axp152.h | 6 ----
include/axp209.h | 9 -----
include/axp221.h | 16 ---------
include/axp_pmic.h | 37 ++++++++++++++++++++
12 files changed, 106 insertions(+), 148 deletions(-)
create mode 100644 include/axp_pmic.h
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index a276fad..05fef32 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -10,7 +10,7 @@
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
-#include <axp221.h>
+#include <axp_pmic.h>
#include <errno.h>
#ifdef CONFIG_MACH_SUN6I
@@ -82,7 +82,7 @@ int print_cpuinfo(void)
int sunxi_get_sid(unsigned int *sid)
{
#ifdef CONFIG_AXP221_POWER
- return axp221_get_sid(sid);
+ return axp_get_sid(sid);
#elif defined SUNXI_SID_BASE
int i;
diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c
index b7ca5d4..19bb5a1 100644
--- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
@@ -17,15 +17,6 @@
#include <asm/gpio.h>
#include <asm/io.h>
#include <errno.h>
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
#ifdef CONFIG_MACH_SUN8I_A33
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index bc0376b..e99b2ba 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -13,15 +13,7 @@
#include <common.h>
#include <mmc.h>
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
+#include <axp_pmic.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/display.h>
@@ -442,40 +434,42 @@ void sunxi_board_init(void)
int power_failed = 0;
unsigned long ramsize;
-#ifdef CONFIG_AXP152_POWER
- power_failed = axp152_init();
- power_failed |= axp152_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
- power_failed |= axp152_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
- power_failed |= axp152_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
- power_failed |= axp152_set_ldo2(CONFIG_AXP_ALDO2_VOLT);
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
+ power_failed = axp_init();
+
+#ifdef CONFIG_AXP221_POWER
+ power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
#endif
-#ifdef CONFIG_AXP209_POWER
- power_failed |= axp209_init();
- power_failed |= axp209_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
- power_failed |= axp209_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
- power_failed |= axp209_set_ldo2(CONFIG_AXP_ALDO2_VOLT);
- power_failed |= axp209_set_ldo3(CONFIG_AXP_ALDO3_VOLT);
- power_failed |= axp209_set_ldo4(CONFIG_AXP_ALDO4_VOLT);
+ power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
+ power_failed |= axp_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
+#ifndef CONFIG_AXP209_POWER
+ power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
#endif
#ifdef CONFIG_AXP221_POWER
- power_failed = axp221_init();
- power_failed |= axp221_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
- power_failed |= axp221_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
- power_failed |= axp221_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
- power_failed |= axp221_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
- power_failed |= axp221_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
- power_failed |= axp221_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
- power_failed |= axp221_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
- power_failed |= axp221_set_aldo3(CONFIG_AXP_ALDO3_VOLT);
- power_failed |= axp221_set_dldo1(CONFIG_AXP_DLDO1_VOLT);
- power_failed |= axp221_set_dldo2(CONFIG_AXP_DLDO2_VOLT);
- power_failed |= axp221_set_dldo3(CONFIG_AXP_DLDO3_VOLT);
- power_failed |= axp221_set_dldo4(CONFIG_AXP_DLDO4_VOLT);
- power_failed |= axp221_set_eldo(1, CONFIG_AXP_ELDO1_VOLT);
- power_failed |= axp221_set_eldo(2, CONFIG_AXP_ELDO2_VOLT);
- power_failed |= axp221_set_eldo(3, CONFIG_AXP_ELDO3_VOLT);
+ power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
#endif
+#ifdef CONFIG_AXP221_POWER
+ power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
+#endif
+ power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
+#ifndef CONFIG_AXP152_POWER
+ power_failed |= axp_set_aldo3(CONFIG_AXP_ALDO3_VOLT);
+#endif
+#ifdef CONFIG_AXP209_POWER
+ power_failed |= axp_set_aldo4(CONFIG_AXP_ALDO4_VOLT);
+#endif
+
+#ifdef CONFIG_AXP221_POWER
+ power_failed |= axp_set_dldo1(CONFIG_AXP_DLDO1_VOLT);
+ power_failed |= axp_set_dldo2(CONFIG_AXP_DLDO2_VOLT);
+ power_failed |= axp_set_dldo3(CONFIG_AXP_DLDO3_VOLT);
+ power_failed |= axp_set_dldo4(CONFIG_AXP_DLDO4_VOLT);
+ power_failed |= axp_set_eldo(1, CONFIG_AXP_ELDO1_VOLT);
+ power_failed |= axp_set_eldo(2, CONFIG_AXP_ELDO2_VOLT);
+ power_failed |= axp_set_eldo(3, CONFIG_AXP_ELDO3_VOLT);
+#endif
+#endif
printf("DRAM:");
ramsize = sunxi_dram_init();
printf(" %lu MiB\n", ramsize >> 20);
diff --git a/drivers/gpio/axp_gpio.c b/drivers/gpio/axp_gpio.c
index 2e97cc3..bd2ac89 100644
--- a/drivers/gpio/axp_gpio.c
+++ b/drivers/gpio/axp_gpio.c
@@ -10,22 +10,13 @@
#include <asm/arch/gpio.h>
#include <asm/arch/pmic_bus.h>
#include <asm/gpio.h>
+#include <axp_pmic.h>
#include <dm.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/root.h>
#include <errno.h>
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#elif defined CONFIG_AXP209_POWER
-#include <axp209.h>
-#elif defined CONFIG_AXP221_POWER
-#include <axp221.h>
-#else
-#error Unknown AXP model
-#endif
-
static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val);
static u8 axp_get_gpio_ctrl_reg(unsigned pin)
diff --git a/drivers/power/axp152.c b/drivers/power/axp152.c
index 740a3b4..c60e4d3 100644
--- a/drivers/power/axp152.c
+++ b/drivers/power/axp152.c
@@ -6,7 +6,7 @@
*/
#include <common.h>
#include <i2c.h>
-#include <axp152.h>
+#include <axp_pmic.h>
static int axp152_write(enum axp152_reg reg, u8 val)
{
@@ -28,7 +28,7 @@ static u8 axp152_mvolt_to_target(int mvolt, int min, int max, int div)
return (mvolt - min) / div;
}
-int axp152_set_dcdc2(int mvolt)
+int axp_set_dcdc2(unsigned int mvolt)
{
int rc;
u8 current, target;
@@ -49,28 +49,28 @@ int axp152_set_dcdc2(int mvolt)
return rc;
}
-int axp152_set_dcdc3(int mvolt)
+int axp_set_dcdc3(unsigned int mvolt)
{
u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 50);
return axp152_write(AXP152_DCDC3_VOLTAGE, target);
}
-int axp152_set_dcdc4(int mvolt)
+int axp_set_dcdc4(unsigned int mvolt)
{
u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 25);
return axp152_write(AXP152_DCDC4_VOLTAGE, target);
}
-int axp152_set_ldo2(int mvolt)
+int axp_set_aldo2(unsigned int mvolt)
{
u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 100);
return axp152_write(AXP152_LDO2_VOLTAGE, target);
}
-int axp152_init(void)
+int axp_init(void)
{
u8 ver;
int rc;
diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c
index 5161bc1..91c35fa 100644
--- a/drivers/power/axp209.c
+++ b/drivers/power/axp209.c
@@ -7,8 +7,7 @@
#include <common.h>
#include <i2c.h>
-#include <asm/arch/gpio.h>
-#include <axp209.h>
+#include <axp_pmic.h>
static int axp209_write(enum axp209_reg reg, u8 val)
{
@@ -30,7 +29,7 @@ static u8 axp209_mvolt_to_cfg(int mvolt, int min, int max, int div)
return (mvolt - min) / div;
}
-int axp209_set_dcdc2(int mvolt)
+int axp_set_dcdc2(unsigned int mvolt)
{
int rc;
u8 cfg, current;
@@ -53,14 +52,14 @@ int axp209_set_dcdc2(int mvolt)
return rc;
}
-int axp209_set_dcdc3(int mvolt)
+int axp_set_dcdc3(unsigned int mvolt)
{
u8 cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25);
return axp209_write(AXP209_DCDC3_VOLTAGE, cfg);
}
-int axp209_set_ldo2(int mvolt)
+int axp_set_aldo2(unsigned int mvolt)
{
int rc;
u8 cfg, reg;
@@ -76,7 +75,7 @@ int axp209_set_ldo2(int mvolt)
return axp209_write(AXP209_LDO24_VOLTAGE, reg);
}
-int axp209_set_ldo3(int mvolt)
+int axp_set_aldo3(unsigned int mvolt)
{
u8 cfg;
@@ -88,10 +87,10 @@ int axp209_set_ldo3(int mvolt)
return axp209_write(AXP209_LDO3_VOLTAGE, cfg);
}
-int axp209_set_ldo4(int mvolt)
+int axp_set_aldo4(unsigned int mvolt)
{
int rc;
- static const int vindex[] = {
+ static const unsigned int vindex[] = {
1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2500,
2700, 2800, 3000, 3100, 3200, 3300
};
@@ -109,7 +108,7 @@ int axp209_set_ldo4(int mvolt)
return axp209_write(AXP209_LDO24_VOLTAGE, reg);
}
-int axp209_init(void)
+int axp_init(void)
{
u8 ver;
int i, rc;
@@ -133,25 +132,3 @@ int axp209_init(void)
return 0;
}
-
-int axp209_poweron_by_dc(void)
-{
- u8 v;
-
- if (axp209_read(AXP209_POWER_STATUS, &v))
- return 0;
-
- return (v & AXP209_POWER_STATUS_ON_BY_DC);
-}
-
-int axp209_power_button(void)
-{
- u8 v;
-
- if (axp209_read(AXP209_IRQ_STATUS5, &v))
- return 0;
-
- axp209_write(AXP209_IRQ_STATUS5, AXP209_IRQ5_PEK_DOWN);
-
- return v & AXP209_IRQ5_PEK_DOWN;
-}
diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c
index 7bbaec8..d621f2a 100644
--- a/drivers/power/axp221.c
+++ b/drivers/power/axp221.c
@@ -12,9 +12,8 @@
#include <common.h>
#include <errno.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/pmic_bus.h>
-#include <axp221.h>
+#include <axp_pmic.h>
static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
{
@@ -26,7 +25,7 @@ static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
return (mvolt - min) / div;
}
-int axp221_set_dcdc1(unsigned int mvolt)
+int axp_set_dcdc1(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
@@ -48,7 +47,7 @@ int axp221_set_dcdc1(unsigned int mvolt)
AXP221_OUTPUT_CTRL1_DCDC1_EN);
}
-int axp221_set_dcdc2(unsigned int mvolt)
+int axp_set_dcdc2(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
@@ -65,7 +64,7 @@ int axp221_set_dcdc2(unsigned int mvolt)
AXP221_OUTPUT_CTRL1_DCDC2_EN);
}
-int axp221_set_dcdc3(unsigned int mvolt)
+int axp_set_dcdc3(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
@@ -82,7 +81,7 @@ int axp221_set_dcdc3(unsigned int mvolt)
AXP221_OUTPUT_CTRL1_DCDC3_EN);
}
-int axp221_set_dcdc4(unsigned int mvolt)
+int axp_set_dcdc4(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
@@ -99,7 +98,7 @@ int axp221_set_dcdc4(unsigned int mvolt)
AXP221_OUTPUT_CTRL1_DCDC4_EN);
}
-int axp221_set_dcdc5(unsigned int mvolt)
+int axp_set_dcdc5(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
@@ -116,7 +115,7 @@ int axp221_set_dcdc5(unsigned int mvolt)
AXP221_OUTPUT_CTRL1_DCDC5_EN);
}
-int axp221_set_dldo1(unsigned int mvolt)
+int axp_set_dldo1(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
@@ -133,7 +132,7 @@ int axp221_set_dldo1(unsigned int mvolt)
AXP221_OUTPUT_CTRL2_DLDO1_EN);
}
-int axp221_set_dldo2(unsigned int mvolt)
+int axp_set_dldo2(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
@@ -150,7 +149,7 @@ int axp221_set_dldo2(unsigned int mvolt)
AXP221_OUTPUT_CTRL2_DLDO2_EN);
}
-int axp221_set_dldo3(unsigned int mvolt)
+int axp_set_dldo3(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
@@ -167,7 +166,7 @@ int axp221_set_dldo3(unsigned int mvolt)
AXP221_OUTPUT_CTRL2_DLDO3_EN);
}
-int axp221_set_dldo4(unsigned int mvolt)
+int axp_set_dldo4(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
@@ -184,7 +183,7 @@ int axp221_set_dldo4(unsigned int mvolt)
AXP221_OUTPUT_CTRL2_DLDO4_EN);
}
-int axp221_set_aldo1(unsigned int mvolt)
+int axp_set_aldo1(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
@@ -201,7 +200,7 @@ int axp221_set_aldo1(unsigned int mvolt)
AXP221_OUTPUT_CTRL1_ALDO1_EN);
}
-int axp221_set_aldo2(unsigned int mvolt)
+int axp_set_aldo2(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
@@ -218,7 +217,7 @@ int axp221_set_aldo2(unsigned int mvolt)
AXP221_OUTPUT_CTRL1_ALDO2_EN);
}
-int axp221_set_aldo3(unsigned int mvolt)
+int axp_set_aldo3(unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
@@ -235,7 +234,7 @@ int axp221_set_aldo3(unsigned int mvolt)
AXP221_OUTPUT_CTRL3_ALDO3_EN);
}
-int axp221_set_eldo(int eldo_num, unsigned int mvolt)
+int axp_set_eldo(int eldo_num, unsigned int mvolt)
{
int ret;
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
@@ -268,7 +267,7 @@ int axp221_set_eldo(int eldo_num, unsigned int mvolt)
return pmic_bus_setbits(AXP221_OUTPUT_CTRL2, bits);
}
-int axp221_init(void)
+int axp_init(void)
{
/* This cannot be 0 because it is used in SPL before BSS is ready */
static int needs_init = 1;
@@ -293,12 +292,12 @@ int axp221_init(void)
return 0;
}
-int axp221_get_sid(unsigned int *sid)
+int axp_get_sid(unsigned int *sid)
{
u8 *dest = (u8 *)sid;
int i, ret;
- ret = axp221_init();
+ ret = pmic_bus_init();
if (ret)
return ret;
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index fc1aea3..9fee66a 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -15,7 +15,7 @@
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/io.h>
-#include <axp221.h>
+#include <axp_pmic.h>
#include <errno.h>
#include <fdtdec.h>
#include <fdt_support.h>
@@ -1217,10 +1217,10 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
if (IS_ENABLED(CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804)) {
/*
* The anx9804 needs 1.8V from eldo3, we do this here
- * and not via CONFIG_AXP221_ELDO3 from board_init()
+ * and not via CONFIG_AXP_ELDO3_VOLT from board_init()
* to avoid turning this on when using hdmi output.
*/
- axp221_set_eldo(3, 1800);
+ axp_set_eldo(3, 1800);
anx9804_init(CONFIG_VIDEO_LCD_I2C_BUS, 4,
ANX9804_DATA_RATE_1620M,
sunxi_display.depth);
diff --git a/include/axp152.h b/include/axp152.h
index c3aef77..1643266 100644
--- a/include/axp152.h
+++ b/include/axp152.h
@@ -25,9 +25,3 @@ enum axp152_reg {
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x97
#define AXP_GPIO_STATE_OFFSET 0
-
-int axp152_set_dcdc2(int mvolt);
-int axp152_set_dcdc3(int mvolt);
-int axp152_set_dcdc4(int mvolt);
-int axp152_set_ldo2(int mvolt);
-int axp152_init(void);
diff --git a/include/axp209.h b/include/axp209.h
index 6170202..13aa66c 100644
--- a/include/axp209.h
+++ b/include/axp209.h
@@ -39,12 +39,3 @@ enum axp209_reg {
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 4
-
-extern int axp209_set_dcdc2(int mvolt);
-extern int axp209_set_dcdc3(int mvolt);
-extern int axp209_set_ldo2(int mvolt);
-extern int axp209_set_ldo3(int mvolt);
-extern int axp209_set_ldo4(int mvolt);
-extern int axp209_init(void);
-extern int axp209_poweron_by_dc(void);
-extern int axp209_power_button(void);
diff --git a/include/axp221.h b/include/axp221.h
index 9c87162..0ee21b6 100644
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -62,19 +62,3 @@
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 0
-
-int axp221_set_dcdc1(unsigned int mvolt);
-int axp221_set_dcdc2(unsigned int mvolt);
-int axp221_set_dcdc3(unsigned int mvolt);
-int axp221_set_dcdc4(unsigned int mvolt);
-int axp221_set_dcdc5(unsigned int mvolt);
-int axp221_set_dldo1(unsigned int mvolt);
-int axp221_set_dldo2(unsigned int mvolt);
-int axp221_set_dldo3(unsigned int mvolt);
-int axp221_set_dldo4(unsigned int mvolt);
-int axp221_set_aldo1(unsigned int mvolt);
-int axp221_set_aldo2(unsigned int mvolt);
-int axp221_set_aldo3(unsigned int mvolt);
-int axp221_set_eldo(int eldo_num, unsigned int mvolt);
-int axp221_init(void);
-int axp221_get_sid(unsigned int *sid);
diff --git a/include/axp_pmic.h b/include/axp_pmic.h
new file mode 100644
index 0000000..ef339c4
--- /dev/null
+++ b/include/axp_pmic.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede at redhat.com>
+ *
+ * X-Powers AX Power Management IC support header
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _AXP_PMIC_H_
+
+#ifdef CONFIG_AXP152_POWER
+#include <axp152.h>
+#endif
+#ifdef CONFIG_AXP209_POWER
+#include <axp209.h>
+#endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif
+
+int axp_set_dcdc1(unsigned int mvolt);
+int axp_set_dcdc2(unsigned int mvolt);
+int axp_set_dcdc3(unsigned int mvolt);
+int axp_set_dcdc4(unsigned int mvolt);
+int axp_set_dcdc5(unsigned int mvolt);
+int axp_set_aldo1(unsigned int mvolt);
+int axp_set_aldo2(unsigned int mvolt);
+int axp_set_aldo3(unsigned int mvolt);
+int axp_set_aldo4(unsigned int mvolt);
+int axp_set_dldo1(unsigned int mvolt);
+int axp_set_dldo2(unsigned int mvolt);
+int axp_set_dldo3(unsigned int mvolt);
+int axp_set_dldo4(unsigned int mvolt);
+int axp_set_eldo(int eldo_num, unsigned int mvolt);
+int axp_init(void);
+int axp_get_sid(unsigned int *sid);
+
+#endif
--
2.5.0
More information about the U-Boot
mailing list