[U-Boot] [PATCH 5/7] sunxi: power: Change A23/A33 aldo1 default voltage to 3.0V

[Hans de Goede]

On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V, make this
the default.

Note that this does not cause any functional changes since all sun8i
board defconfig-s already contained: CONFIG_AXP_ALDO1_VOLT=3000 .

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 configs/Sinlinx_SinA33_defconfig         | 1 -
 configs/ga10h_v1_1_defconfig             | 1 -
 configs/gt90h_v4_defconfig               | 1 -
 configs/q8_a23_tablet_800x480_defconfig  | 1 -
 configs/q8_a33_tablet_1024x600_defconfig | 1 -
 configs/q8_a33_tablet_800x480_defconfig  | 1 -
 drivers/power/Kconfig                    | 3 ++-
 7 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index 79fa5bc..013c35e 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -9,4 +9,3 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP_ALDO1_VOLT=3000
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index b288e82..34e74af 100644
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -22,6 +22,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig
index e7347d8..a14de0d 100644
--- a/configs/gt90h_v4_defconfig
+++ b/configs/gt90h_v4_defconfig
@@ -21,5 +21,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_MUSB_HOST=y
diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig
index 4993fa9..7391464 100644
--- a/configs/q8_a23_tablet_800x480_defconfig
+++ b/configs/q8_a23_tablet_800x480_defconfig
@@ -21,5 +21,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_MUSB_HOST=y
diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig
index d427966..16f8600 100644
--- a/configs/q8_a33_tablet_1024x600_defconfig
+++ b/configs/q8_a33_tablet_1024x600_defconfig
@@ -21,5 +21,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_MUSB_HOST=y
diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig
index 7f5cc47..6378918 100644
--- a/configs/q8_a33_tablet_800x480_defconfig
+++ b/configs/q8_a33_tablet_800x480_defconfig
@@ -21,5 +21,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_AXP_DLDO1_VOLT=3300
-CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_MUSB_HOST=y
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index cedc36a..ba1af6c 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -90,7 +90,8 @@ config AXP_DCDC5_VOLT
 config AXP_ALDO1_VOLT
 	int "axp pmic (a)ldo1 voltage"
 	depends on AXP221_POWER
-	default 0
+	default 0 if MACH_SUN6I
+	default 3000 if MACH_SUN8I
 	---help---
 	Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
 	disable aldo1.
-- 
2.5.0