[U-Boot] [PATCH V2 03/11] Peach-Pi: dts: add cpu-model string

[Simon Glass]

Hi Przemyslaw,

On 21 September 2015 at 13:26, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
> This platform is based on Exynos5800 but the cpu id is 0x5422.
> This doesn't fit the common Exynos SoC name convention, so now,
> the CPU name is defined by device tree string, to be printed
> properly.
>
> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
> ---
> Changes V2:
> - move cpu name from config to dts
> ---
>  arch/arm/dts/exynos5800-peach-pi.dts | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
> index 1d7ff23..76826dc 100644
> --- a/arch/arm/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/dts/exynos5800-peach-pi.dts
> @@ -12,6 +12,7 @@
>
>  / {
>         model = "Samsung/Google Peach Pi board based on Exynos5800";
> +       cpu-model = "Exynos5800";
>
>         compatible = "google,pit-rev#", "google,pit",
>                 "google,peach", "samsung,exynos5800", "samsung,exynos5";
> --
> 1.9.1
>

Is this defined by the standard binding? If not, can you add or change
the binding file?

Regards,
Simon