[U-Boot] [PATCH 03/10] net: designware: support phy reset device-tree bindings
Simon Glass
sjg at chromium.org
Sat Oct 3 16:30:11 CEST 2015
Hi Sjoerd,
On 1 October 2015 at 10:48, Sjoerd Simons <sjoerd.simons at collabora.co.uk> wrote:
> Add support for the snps,reset-gpio, snps,reset-active-low (optional) and
> snps,reset-delays-us device-tree bindings. The combination of these
> three define how the PHY should be reset to ensure it's in a sane state.
>
> Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
> ---
>
> drivers/net/designware.c | 74 ++++++++++++++++++++++++++++++++++++++++++++----
> drivers/net/designware.h | 11 +++++++
> 2 files changed, 79 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/designware.c b/drivers/net/designware.c
> index 6433896..f9ceec2 100644
> --- a/drivers/net/designware.c
> +++ b/drivers/net/designware.c
> @@ -28,7 +28,12 @@ DECLARE_GLOBAL_DATA_PTR;
>
> static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
> {
> +#ifdef CONFIG_DM_ETH
> + struct dw_eth_dev *priv = dev_get_priv((struct udevice *)bus->priv);
> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
> +#else
> struct eth_mac_regs *mac_p = bus->priv;
> +#endif
> ulong start;
> u16 miiaddr;
> int timeout = CONFIG_MDIO_TIMEOUT;
> @@ -51,7 +56,12 @@ static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
> static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
> u16 val)
> {
> +#ifdef CONFIG_DM_ETH
> + struct dw_eth_dev *priv = dev_get_priv((struct udevice *)bus->priv);
> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
> +#else
> struct eth_mac_regs *mac_p = bus->priv;
> +#endif
> ulong start;
> u16 miiaddr;
> int ret = -ETIMEDOUT, timeout = CONFIG_MDIO_TIMEOUT;
> @@ -74,7 +84,40 @@ static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
> return ret;
> }
>
> -static int dw_mdio_init(const char *name, struct eth_mac_regs *mac_regs_p)
> +#if CONFIG_DM_ETH
> +static int dw_mdio_reset(struct mii_dev *bus)
> +{
> + struct udevice *dev = bus->priv;
> + struct dw_eth_pdata *pdata = dev_get_platdata(dev);
> + int ret;
> +
> + if (pdata->reset_gpio.dev == NULL)
!dm_gpio_is_valid(&pdata->reset_gpio)
> + return 0;
> +
> + /* reset the phy */
> + ret = dm_gpio_set_value(&pdata->reset_gpio, 0);
> + if (ret)
> + return ret;
> +
> + udelay(pdata->reset_delays[0]);
> +
> + ret = dm_gpio_set_value(&pdata->reset_gpio, 1);
> + if (ret)
> + return ret;
> +
> + udelay(pdata->reset_delays[1]);
> +
> + ret = dm_gpio_set_value(&pdata->reset_gpio, 0);
> + if (ret)
> + return ret;
> +
> + udelay(pdata->reset_delays[2]);
> +
> + return 0;
> +}
> +#endif
> +
> +static int dw_mdio_init(const char *name, void *priv)
> {
> struct mii_dev *bus = mdio_alloc();
>
> @@ -85,9 +128,12 @@ static int dw_mdio_init(const char *name, struct eth_mac_regs *mac_regs_p)
>
> bus->read = dw_mdio_read;
> bus->write = dw_mdio_write;
> +#ifdef CONFIG_DM_ETH
> + bus->reset = dw_mdio_reset;
> +#endif
> snprintf(bus->name, sizeof(bus->name), name);
>
> - bus->priv = (void *)mac_regs_p;
> + bus->priv = priv;
>
> return mdio_register(bus);
> }
> @@ -604,7 +650,7 @@ static int designware_eth_probe(struct udevice *dev)
> priv->dma_regs_p = (struct eth_dma_regs *)(iobase + DW_DMA_BASE_OFFSET);
> priv->interface = pdata->phy_interface;
>
> - dw_mdio_init(dev->name, priv->mac_regs_p);
> + dw_mdio_init(dev->name, dev);
> priv->bus = miiphy_get_dev_by_name(dev->name);
>
> ret = dw_phy_init(priv, dev);
> @@ -624,8 +670,11 @@ static const struct eth_ops designware_eth_ops = {
>
> static int designware_eth_ofdata_to_platdata(struct udevice *dev)
> {
> - struct eth_pdata *pdata = dev_get_platdata(dev);
> + struct dw_eth_pdata *dw_pdata = dev_get_platdata(dev);
> + struct eth_pdata *pdata = &dw_pdata->eth_pdata;
> const char *phy_mode;
> + int reset_flags = GPIOD_IS_OUT;
> + int ret = 0;
>
> pdata->iobase = dev_get_addr(dev);
> pdata->phy_interface = -1;
> @@ -637,7 +686,20 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev)
> return -EINVAL;
> }
>
> - return 0;
> + if (fdtdec_get_bool(gd->fdt_blob, dev->of_offset,
> + "snps,reset-active-low"))
> + reset_flags |= GPIOD_ACTIVE_LOW;
> +
> + ret = gpio_request_by_name(dev, "snps,reset-gpio", 0,
> + &dw_pdata->reset_gpio, reset_flags);
It's odd to put a probed gpio into platdata. Should you use private
data instead? (dev_get_priv())
> + if (ret == 0) {
> + ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
> + "snps,reset-delays-us", dw_pdata->reset_delays, 3);
> + } else if (ret == -ENOENT) {
> + ret = 0;
> + }
> +
> + return ret;
> }
>
> static const struct udevice_id designware_eth_ids[] = {
> @@ -655,7 +717,7 @@ U_BOOT_DRIVER(eth_designware) = {
> .probe = designware_eth_probe,
> .ops = &designware_eth_ops,
> .priv_auto_alloc_size = sizeof(struct dw_eth_dev),
> - .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> + .platdata_auto_alloc_size = sizeof(struct dw_eth_pdata),
> .flags = DM_FLAG_ALLOC_PRIV_DMA,
> };
>
> diff --git a/drivers/net/designware.h b/drivers/net/designware.h
> index 4b9ec39..f34263b 100644
> --- a/drivers/net/designware.h
> +++ b/drivers/net/designware.h
> @@ -8,6 +8,9 @@
> #ifndef _DW_ETH_H
> #define _DW_ETH_H
>
> +#include <common.h>
Drop that one...
> +#include <asm/gpio.h>
> +
> #define CONFIG_TX_DESCR_NUM 16
> #define CONFIG_RX_DESCR_NUM 16
> #define CONFIG_ETH_BUFSIZE 2048
> @@ -235,4 +238,12 @@ struct dw_eth_dev {
> struct mii_dev *bus;
> };
>
> +#ifdef CONFIG_DM_ETH
Do you need this #ifdef
> +struct dw_eth_pdata {
> + struct eth_pdata eth_pdata;
> + struct gpio_desc reset_gpio;
> + u32 reset_delays[3];
> +};
> +#endif
> +
> #endif
> --
> 2.5.3
>
Regards,
Simon
More information about the U-Boot
mailing list