[U-Boot] [PATCH v2] dm: tpm: Drop CONFIG_DM_TPM
Christophe Ricard
christophe.ricard at gmail.com
Sun Oct 4 10:46:18 CEST 2015
Hi Simon,
Acked-by: Christophe Ricard<christophe-h.ricard at st.com>
Best Regards
Christophe
On 03/10/2015 14:39, Simon Glass wrote:
> Now that all TPM drivers use driver model, we can drop the special driver
> model CONFIG option.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v2:
> - Fix missing 'depends on DM' left out of the v1 patch
>
> drivers/tpm/Kconfig | 15 +++------------
> drivers/tpm/Makefile | 2 +-
> lib/Kconfig | 1 +
> 3 files changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/tpm/Kconfig b/drivers/tpm/Kconfig
> index 3ab652c..31b35f7 100644
> --- a/drivers/tpm/Kconfig
> +++ b/drivers/tpm/Kconfig
> @@ -4,15 +4,6 @@
>
> menu "TPM support"
>
> -config DM_TPM
> - bool "Enable driver model for Trusted Platform Module drivers"
> - depends on DM && TPM
> - help
> - Enable driver model for TPMs. The TIS interface (tis_open(),
> - tis_sendrecv(), etc.) is then implemented by the TPM uclass. Note
> - that even with driver model only a single TPM is currently
> - supported, since the tpm library assumes this.
> -
> config TPM_TIS_SANDBOX
> bool "Enable sandbox TPM driver"
> depends on SANDBOX
> @@ -24,7 +15,7 @@ config TPM_TIS_SANDBOX
>
> config TPM_ATMEL_TWI
> bool "Enable Atmel TWI TPM device driver"
> - depends on DM_TPM && DM_I2C
> + depends on TPM && DM_I2C
> help
> This driver supports an Atmel TPM device connected on the I2C bus.
> The usual tpm operations and the 'tpm' command can be used to talk
> @@ -33,7 +24,7 @@ config TPM_ATMEL_TWI
>
> config TPM_TIS_INFINEON
> bool "Enable support for Infineon SLB9635/45 TPMs on I2C"
> - depends on DM_TPM && DM_I2C
> + depends on TPM && DM_I2C
> help
> This driver supports Infineon TPM devices connected on the I2C bus.
> The usual tpm operations and the 'tpm' command can be used to talk
> @@ -57,7 +48,7 @@ config TPM_TIS_I2C_BURST_LIMITATION_LEN
>
> config TPM_TIS_LPC
> bool "Enable support for Infineon SLB9635/45 TPMs on LPC"
> - depends on DM_TPM && X86
> + depends on TPM && X86
> help
> This driver supports Infineon TPM devices connected on the I2C bus.
> The usual tpm operations and the 'tpm' command can be used to talk
> diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile
> index 5748145..1d49e95 100644
> --- a/drivers/tpm/Makefile
> +++ b/drivers/tpm/Makefile
> @@ -3,7 +3,7 @@
> # SPDX-License-Identifier: GPL-2.0+
> #
>
> -obj-$(CONFIG_DM_TPM) += tpm-uclass.o
> +obj-$(CONFIG_TPM) += tpm-uclass.o
>
> obj-$(CONFIG_TPM_ATMEL_TWI) += tpm_atmel_twi.o
> obj-$(CONFIG_TPM_TIS_INFINEON) += tpm_tis_infineon.o
> diff --git a/lib/Kconfig b/lib/Kconfig
> index 0673072..70ed20d 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -56,6 +56,7 @@ source lib/rsa/Kconfig
>
> config TPM
> bool "Trusted Platform Module (TPM) Support"
> + depends on DM
> help
> This enables support for TPMs which can be used to provide security
> features for your board. The TPM can be connected via LPC or I2C
More information about the U-Boot
mailing list